Best Metal Chicken Feeder (2026): 5 Picks for Coops and Runs
5 metal chicken feeders, from large automatic hoppers to small slide-top trays, compared by capacity, ports, material, legs and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCybrasc 10-Gal Feeder9.6/10View on Amazon - 2
Best Port CountKOL 50LB Feeder9.6/10View on Amazon - 3
Best Adjustable LegsGADFISH 55LB Feeder9.5/10View on Amazon - 4
Best Small FlockMaansfy 20LB Feeder9.5/10View on Amazon - 5
Best Chick TraysPotchen 2-Pack Feeder9.3/10View on Amazon
A morning feed round ends with spilled grain and an empty trough, and the best metal chicken feeder is the one that holds feed, resists rust and keeps waste down. The feeders below range from large automatic hoppers to small slide-top trays. Each pick is compared by capacity, ports, material, legs and warranty, from what each listing states.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
As an Amazon Associate, CoopKeeperHQ earns from qualifying purchases.
Quick picks
- Best Overall Cybrasc 10-Gal Feeder: 10-gallon feeder with a window, lockable lid and 3-level legs Check price on Amazon
- Best Port Count KOL 50LB Feeder: 16 smooth-edged ports with a roof and locking clasps Check price on Amazon
- Best Adjustable Legs GADFISH 55LB Feeder: Height-adjustable legs with a conical lid and 8 ports Check price on Amazon
- Best Small Flock Maansfy 20LB Feeder: 12 ports with smooth edges and legs that keep feed off the ground Check price on Amazon
- Best Chick Trays Potchen 2-Pack Feeder: 2 slide-top trays with 14 holes for chicks Check price on Amazon
Picks for the flock

Cybrasc 10-Gal Metal Automatic Chicken Feeder
Automatic feeder with a 10-gallon hopper, 55LB capacity, 8 wide ports, a see-through window and 3-level legs, in heavy-duty alloy steel.
Who it's for: keepers with medium to large flocks who want a window, a lockable lid and adjustable legs.
Who should skip it: anyone who needs more than 8 ports or a roof beyond the lid.
The Cybrasc example is a metal automatic feeder with a 10-gallon hopper, 55LB capacity, 8 wide ports, a crystal-clear acrylic window and 3-level legs. The listing states heavy-duty alloy steel, downward-deep ports, a lockable top lid with a sealing cap and reinforced steel legs. Listed weight is 12.0 pounds and the listing states a 1 Year warranty.
Pros
- 55LB capacity with a see-through acrylic window
- 8 wide ports that reduce crowding
- Lockable top lid with a sealing cap for rain, moisture and debris
- 3-level legs on reinforced steel for stable placement
Cons
- Window film must be removed from both sides before use
- No roof beyond the lockable lid is listed
- Assembly still needs a screwdriver and Allen wrench
- No height figure for the legs is stated

KOL 50LB Metal Chicken Feeder, 16 Ports
Metal feeder with a 50LB capacity, 16 smooth-edged ports, a roof with locking clasps and a transparent strip window, in powder-coated steel.
Who it's for: keepers who want many ports and a roofed feeder for outdoor use.
Who should skip it: anyone who needs adjustable legs, a stated weight or a warranty term.
The KOL example is a metal feeder with a 50LB capacity, 16 smooth-edged ports, an oversized roof with locking clasps and a transparent strip window. The listing states powder-coated steel, gravity-fed openings with no clogging and a smooth cylindrical design for easy cleaning. Assembly is listed as tool-free under 30 minutes for one person.
Pros
- 16 smooth-edged ports that prevent scratches and injuries
- Oversized roof with locking clasps for rain and snow
- Transparent strip window showing feed levels
- Tool-free assembly under 30 minutes for one person
Cons
- No warranty term is stated
- No legs or height adjustment is listed
- No weight is stated
- No port width is stated

GADFISH 55LBS Automatic Chicken Feeder, 8 Ports
Automatic metal feeder with a 55LB capacity, 8 ports, height-adjustable legs and a conical metal lid, with a window design for viewing feed conditions.
Who it's for: keepers who want a large metal feeder with adjustable legs for poultry of different sizes.
Who should skip it: anyone who needs a stated warranty, port width or a roof beyond the lid.
The GADFISH example is an automatic metal feeder with a 55LB capacity, 8 feeding ports, height-adjustable legs and a metal conical lid. The listing states legs that rotate to adjust height with no tools, an increased base contact area for stability and extended ports that cut waste. The listing states a window design for viewing feed conditions.
Pros
- 55LB capacity with 8 ports that feed 8 poultry at the same time
- Height-adjustable legs that rotate with no tools
- Metal conical lid that drains rainwater and keeps poultry from standing on it
- Extended ports that cut waste and keep other animals out
Cons
- No warranty term is stated
- No port width is stated
- No roof beyond the conical lid is listed
- No assembly time is stated

Maansfy 20LB Heavy Duty Metal Chicken Feeder
Metal feeder with a 20LB hopper, 12 round ports, smooth edges and reinforced legs that keep feed off the ground, for chickens, ducks and turkeys.
Who it's for: keepers with 8-10 poultry who want a smaller metal feeder with smooth edges.
Who should skip it: anyone who needs a large capacity, a feed window or a warranty term.
The Maansfy example is a metal feeder with a 20LB hopper, 12 round anti-clogging ports, smooth edges and reinforced 5mm flat iron legs. The listing states support for 8-10 poultry, galvanized steel, tool-free quick assembly and a portable handle. Listed dimensions are 11.8 inches x 11.4 Inches x 22.0 Inches.
Pros
- 12 round anti-clogging ports with smooth edges for beak safety
- Reinforced 5mm flat iron legs that keep feed off the ground
- Galvanized steel that resists rain, snow and extreme weather
- Tool-free quick assembly with a portable handle
Cons
- No warranty term is stated
- Capacity of 20LB is smaller than the large hoppers here
- No window for feed levels is listed
- No port width is stated

Potchen 2-Pack Metal Slide-Top Chicken Feeder
2-pack of slide-top metal trays, 12 inches long, with 7 holes per side totaling 14, in thick gauge galvanized steel, for chicks and chickens.
Who it's for: keepers raising chicks who want small slide-top trays.
Who should skip it: anyone who needs a large capacity, legs or a warranty term.
The Potchen example is a 2-pack of slide-top metal trays, 12 inches long, with 7 holes per side totaling 14 and a lidded top. The listing states thick gauge galvanized steel, a sliding opening for filling and cleaning and a lightweight design for backyards and brooder boxes.
Pros
- 2 trays with a slide-top lid that keeps dust, debris and insects out
- 7 holes per side totaling 14 for balanced feeding
- Thick gauge galvanized steel with rust and corrosion resistance
- Sliding opening for quick filling and thorough cleaning
Cons
- Base edges may be slightly sharp; listing advises cut-resistant gloves
- No warranty term is stated
- No capacity figure is stated
- No legs or stand is listed
Other options for the coop
30LB Large Metal Chicken FeederCheck price on Amazon
25LBS Metal Chicken Feeder HangingCheck price on Amazon
RentACoop Metal Trough FeederCheck price on Amazon
Little Giant® Hanging Metal Poultry FeederCheck price on Amazon
RentACoop Automatic Treadle Chicken FeederCheck price on Amazon
Compare the best metal chicken feeder picks
Use this table to compare capacity, ports, material, legs and warranty across all five feeders. The Keeper Score is the raw total from the scoring below.
| Model | Keeper Score | Capacity | Ports | Material | Legs or stand | Warranty |
|---|---|---|---|---|---|---|
| Cybrasc 10-Gal Feeder | 9.6/10 | 55LB (10-Gal) | 8 | Alloy steel | 3-level legs | 1 Year |
| KOL 50LB Feeder | 9.6/10 | 50LB | 16 | Powder-coated steel | Not stated | Not stated |
| GADFISH 55LB Feeder | 9.5/10 | 55LB | 8 | Metal | Height-adjustable legs | Not stated |
| Maansfy 20LB Feeder | 9.5/10 | 20LB | 12 | Galvanized steel | 5mm flat iron legs | Not stated |
| Potchen 2-Pack Feeder | 9.3/10 | Not stated | 14 (7 per side) | Galvanized steel | Not stated | Not stated |
The cards below carry the same figures, with the pros and cons that matter for daily feeding.
Flock fit
How we scored
The Keeper Score weighs performance, build, value, safety and warranty. For feeders, safety points come from named features such as smooth edges, lockable lids and sealing caps. Only the Cybrasc example states a warranty term, so only that pick earned warranty points. How we pick explains the weights.
Buying guide: choosing the best metal chicken feeder
Capacity and ports
Capacity sets how often the feeder needs filling. The Cybrasc example lists 55LB with 8 wide ports. The KOL example lists 50LB with 16 ports. The GADFISH example lists 55LB with 8 ports. The Maansfy example lists 20LB with 12 ports, supporting 8-10 poultry. The Potchen example lists no capacity, with 7 holes per side totaling 14.
Material and rust resistance
Metal build decides outdoor life. The Cybrasc example lists heavy-duty alloy steel that resists rust and corrosion. The KOL example lists powder-coated steel that resists rust and corrosion. The Maansfy example lists thick rust-resistant galvanized steel. The Potchen example lists thick gauge galvanized steel. The GADFISH example lists high-quality metal that is not prone to rust.
Legs, lids and waste
Legs and lids change daily chores. The GADFISH example lists height-adjustable legs and a conical metal lid that drains rainwater. The Cybrasc example lists 3-level legs and a lockable top lid with a sealing cap. The KOL example lists an oversized roof with locking clasps. The Maansfy example lists reinforced legs that keep feed off the ground. The Potchen example lists a slide-top lid that keeps dust, debris and insects out.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
Fitting It to Your Flock
- Large flocks: the Cybrasc example lists 55LB with 8 wide ports for medium to large flocks.
- Many ports: the KOL example lists 16 ports with smooth edges.
- Adjustable height: the GADFISH example lists legs that rotate to adjust height for poultry of different sizes.
- Small trays for chicks: the Potchen example lists slide-top trays for chick rearing.
FAQ for the flock
Which feeder here lists the highest port count?
The KOL example lists 16 ports. The Potchen example lists 7 holes per side totaling 14. The Maansfy example lists 12 ports.
Which feeders here list a window for feed levels?
The Cybrasc example lists a see-through acrylic window. The KOL example lists a transparent strip window. The GADFISH example lists a window design for viewing feed conditions.
Do any of these feeders list a warranty?
The Cybrasc example states a 1 Year warranty. The other listings state no warranty term.
Which feeder here warns about sharp edges?
The Potchen example states the base edges may be slightly sharp and advises cut-resistant gloves during installation and use. The other listings state smooth edges or make no edge claim.
Which feeders here list legs?
The GADFISH example lists height-adjustable legs. The Cybrasc example lists 3-level legs. The Maansfy example lists reinforced 5mm flat iron legs.
More coop guides
- Best Large Chicken Feeder: 5 High-Capacity Picks (2026)
- Best Chicken Feeder for Small Flock (2026): Top Picks Compared
- Best Outdoor Chicken Feeder (2026): 5 Weatherproof Picks
- Best Chicken Feeder No Waste: Picks That Save Feed
- Best Chicken Feeder Ports (2026): 5 Top DIY Kits
See every feeders and waterers guide and the chicken coop picks.




