How to Cut Cattle Panel for Chicken Runs
A plain guide to cutting cattle panel for a chicken run, from marking the cut to choosing a bolt cutter that fits the wire.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SPENDINS 30 in Bolt Cutter with Drop Forged Cr-Mo9.7/10View on Amazon - 2
WORKPRO Bolt Cutter, Bi-Material Handle with Soft9.6/10View on Amazon - 3
KSEIBI 141585 Heavy-Duty Bolt Cutter 249.5/10View on Amazon - 4
WORKPRO Bolt Cutter, Bi-Material Handle with Soft9.5/10View on Amazon
A run that fits the yard starts with a panel that fits the run. Cattle panel is stiff, springy and awkward to handle, and a panel that is too long ends up bowed against the fence or poking past the corner post. Learning how to cut cattle panel turns that awkward sheet into a run wall that sits flat, meets the posts and keeps the flock where it belongs.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

SPENDINS 30 in Bolt Cutter with Drop Forged Cr-Mo
A 30 in cutter with drop forged Cr-Mo alloy steel blades, a stated blade hardness of up to 62 HRC and a pair of working gloves in the box.
Who it's for: keepers cutting cattle panel and other heavy wire who want the widest stated capacity and gloves in the box.
Who should skip it: anyone who needs a stated warranty or a shorter cutter.
SPENDINS lists the cutter at 30 in, or 750 mm, and 8 lb, with drop forged chromium-molybdenum alloy steel blades that are high-frequency induction quenched, polished and blackened. The listing states blade hardness of up to 62 HRC and a maximum cutting capacity of 3/8 in for 42 HRC material and 1/2 in for 25 HRC material, the widest capacity stated in this guide. Eccentric bolts allow blade clearance adjustment, and the internal cam keeps the blades aligned. Working gloves come in the package.
Pros
- Cutting capacity of 3/8 in at 42 HRC and 1/2 in at 25 HRC, the widest stated here
- Blades of drop forged Cr-Mo alloy steel, induction quenched and blackened
- Eccentric bolts for blade clearance adjustment
- Working gloves included in the package
Cons
- No warranty term is stated
- No jaw opening is stated
- No replacement blades are listed
- Long handles need open space to swing fully

WORKPRO Bolt Cutter, Bi-Material Handle with Soft
A 30 in cutter with drop forged chrome molybdenum steel jaws and bi-material grips, rated to 15/32 in at HRC under 25.
Who it's for: keepers who want a long cutter with strong stated capacity for panel wire and fencing.
Who should skip it: anyone who needs a stated weight or warranty, or a compact cutter for tight spaces.
WORKPRO lists the W017007A at 30 in with drop forged chrome molybdenum steel jaws and a powder coating, a classic lever-fulcrum design and precisely aligned blades. The listing states a cutting capacity of 25/64 in at HRC 42 or less and 15/32 in at HRC under 25, for soft metal, bolts, rods, rivets and chain. The handles are bi-material with a soft rubber grip. One contradiction: the spec table lists 37.4 in, while the title and size field state 30 in, so this guide treats it as a 30 in cutter.
Pros
- Cutting capacity of 25/64 in at HRC 42 or less and 15/32 in at HRC under 25
- Drop forged chrome molybdenum steel jaws with powder coating
- Lever-fulcrum design with precisely aligned blades
- Bi-material anti-slip grips for control and comfort
Cons
- No warranty term is stated
- No weight is stated
- No jaw opening is stated
- No replacement blades are listed

KSEIBI 141585 Heavy-Duty Bolt Cutter 24
A 24 in cutter with a black anti-rust coating and a soft grip rubber handle, rated to 3/8 in at HRC under 25.
Who it's for: keepers who want a mid-length cutter that handles panel wire without the reach of a 30 in tool.
Who should skip it: anyone cutting the thickest wire here, or who needs a stated warranty.
KSEIBI lists the 141585 at 24 in, or 600 mm, for fence, steel wire, chain, screws, rivets and medium padlocks. The listing states a cutting capacity of 5/16 in at HRC 42 or less and 3/8 in at HRC under 25. The cutter is built from steel with a black coating that the maker says helps prevent rust, and the handles are soft grip rubber. The maker claims the 24 in size balances maneuverability and cutting capacity.
Pros
- Cutting capacity of 5/16 in at HRC 42 or less and 3/8 in at HRC under 25
- Black anti-rust coating on the cutter
- Soft grip rubber ergonomic handle for comfort
- Maker claims an optimal balance between maneuverability and cutting capacity
Cons
- No warranty term is stated
- No weight is stated
- No blade material grade is named beyond steel
- No replacement blades are listed

WORKPRO Bolt Cutter, Bi-Material Handle with Soft
An 18 in cutter with drop forged chrome molybdenum steel jaws and bi-material grips, rated to 5/16 in at HRC under 25.
Who it's for: keepers making short cuts or working in tight corners where a long cutter cannot swing.
Who should skip it: anyone cutting the thickest panel wire, where a longer cutter with more stated capacity fits better.
WORKPRO lists the W017005A at 18 in, with product dimensions of 18.0 x 5.5 x 2.2 in. The jaws are drop forged chrome molybdenum steel with a powder coating, with a classic lever-fulcrum design and precisely aligned blades for added leverage. The listing states a cutting capacity of 1/4 in at HRC 42 or less and 5/16 in at HRC under 25, for soft metal, bolts, rods, rivets and chain. The handles are bi-material with a soft rubber, anti-slip grip.
Pros
- Cutting capacity of 1/4 in at HRC 42 or less and 5/16 in at HRC under 25
- Drop forged chrome molybdenum steel jaws with powder coating
- Lever-fulcrum design with precisely aligned blades
- Compact 18 in length for tight corners and short cuts
Cons
- No warranty term is stated
- No weight is stated
- Smallest stated cutting capacity in this guide
- No replacement blades are listed
Other options for the coop
Cat's Claw Fasteners Screw In Fence Staples for Wire FencingCheck price on Amazon
PC Blue Polycarbonate Roof PanelsCheck price on Amazon
Cattle Panel 14Gauge Galvanized Woven Wire Fence 4FT x 328 FTCheck price on Amazon
ARQRHTLY 4 Pack Horse Panel Clamps for Wood BoardsCheck price on Amazon
Transparent Polycarbonate Roof Panels Easy to CutCheck price on Amazon
Corrugated Roof PanelsCheck price on Amazon
How to Cut Cattle Panel: Mark the Cut Line
Measure the space where the panel will sit, then mark the cut line with chalk or tape so it stays visible while you work. Lay the panel flat on open ground and check the line against the space before cutting. A line marked in haste is hard to undo, and a panel cut short leaves a gap in the run wall.
Wear gloves and eye protection before the first cut, and keep hands clear of the jaws. Set the cutter jaws around the wire on the marked line and cut wire by wire along the line. The panel will spring as wires part, so hold the loose end steady. Our bolt cutters vs wire cutters guide explains which tool suits fencing work.
Bolt Cutters for Cutting Cattle Panel
The cut comes down to the cutter: the jaws must close around the wire, and the handles must give enough leverage to cut wire by wire. The cutters below are ranked by stated cutting capacity, widest first.
Fit the Panel to the Run
Carry the cut panel to the run and set it against the posts before fastening anything. Check the fit along the full length: the panel should meet the posts without bowing. Fasten the panel to the posts with cable ties or wire, working from the top down so the panel stays plumb.
If the panel still runs long after the first cut, mark the new line and trim it the same way rather than forcing it into place. A panel that is forced will bow, and a bowed panel leaves gaps at the posts. For the run itself, see the chicken runs and fencing guides for layouts that fit the yard.
Mind the Cut Ends
Every cut leaves a sharp wire end, so check the ends before the flock moves in. Run a gloved hand near the cut edge, never along it, and check that each end is bent away from the run interior or covered where birds brush past. Sweep the ground under the cut line for wire offcuts before letting the birds out.
A Simple Cutting Checklist
- Cut line is marked and checked against the space
- Gloves and eye protection are on before cutting
- Panel is flat on open ground with the line clear
- Cut is made wire by wire along the marked line
- Cut ends are checked and kept away from the flock
- Panel meets the posts without bowing
For more on choosing fencing for the run, see our heavy duty field fence picks.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What tool cuts cattle panel for a chicken run?
A bolt cutter sized to the wire does the job. The cutters in this guide state cutting capacities from 5/16 in at HRC under 25 for the smallest cutter to 1/2 in at 25 HRC material for the longest, so match the cutter to the wire before buying.
Can a bolt cutter cut cattle panel wire?
Yes, when the wire sits within the cutter’s stated capacity. Check the capacity the listing states, and choose a cutter with room to spare rather than one rated exactly at the wire size.
How do I cut cattle panel to fit a run?
Measure the space, mark the cut line, lay the panel flat and cut wire by wire. Fit the cut panel against the posts before fastening it, and trim again if it still runs long.
What should I do with the sharp ends after cutting cattle panel?
Check each cut end with a gloved hand and bend the ends away from where the birds walk and scratch, or cover them where they sit near a path. Sweep the ground under the cut line for wire offcuts before the flock uses the run.
Should I cut cattle panel before building the run frame?
Measure the run space first, then cut the panel to fit it. Cutting to a measured space gives a panel that meets the posts without bowing.
More coop guides
- Bolt Cutters vs Wire Cutters for Fencing: Which One Should You Buy?
- Best Heavy Duty Field Fence (2026): 4 Rolls Compared
- Cheap Chicken Wire: 5 Budget Picks for Runs and Coops (2026)
- Best Chicken Wire Run (2026): 5 Picks for Flocks and Gardens
- Cheap Predator Proof Chicken Run: 5 Budget Backyard Picks (2026)
- Best Ground Anchors for Chicken Run (2026): Wind Picks
See the chicken run picks and the field fence guides.




