Chain Link Fence Post Size: Terminal, Line and Rail Sizes
Terminal posts at 2-3/8 inch, line posts at 1-7/8 inch and top rails at 1-3/8 inch: the chain link post sizes the listings show, and where each size goes.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Goldshire 48x72in Adjustable Galvanized Chain Link Fence Gate9.7/10View on Amazon - 2
SJKHGU 100 Pcs 8-1/4 in Chain Link Fence Wire Ties9.5/10View on Amazon - 3
Fijaru EZ Twist Chain Link Fence Ties9.5/10View on Amazon - 4
Tondiamo 24 Pcs Tube T Post Insulator for Electric Chain LinkView on Amazon - 5
Tondiamo 48 Pcs Tube T Post Insulator for Electric Chain LinkView on Amazon - 6
T Post Puller Fence Post Puller Heavy Duty Fence Post PullerView on Amazon - 7
Heavy Duty Steel T-Post Puller with 52'' Lifting Chain &View on Amazon - 8
VEVOR 6 ft Fence PostView on Amazon - 9
1 Pack 24 Inch Black Fence Post Driver with Handle 34LB IronView on Amazon
A run fence only holds when the posts hold, and the posts hold when the size matches the job. Terminal posts anchor the ends and corners, line posts carry the middle of the run, and a slimmer rail runs across the top. This guide to chain link fence post size lays out the sizes the listings show, so the posts ordered match the fittings already on the fence.
Other options for the coop
Tondiamo 24 Pcs Tube T Post Insulator for Electric Chain LinkCheck price on Amazon
Tondiamo 48 Pcs Tube T Post Insulator for Electric Chain LinkCheck price on Amazon
T Post Puller Fence Post Puller Heavy Duty Fence Post PullerCheck price on Amazon
Heavy Duty Steel T-Post Puller with 52'' Lifting Chain &Check price on Amazon
VEVOR 6 ft Fence PostCheck price on Amazon
1 Pack 24 Inch Black Fence Post Driver with Handle 34LB IronCheck price on Amazon
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
Chain link fence post size: the short answer
Terminal posts are the larger posts, line posts are the slimmer posts between them, and the top rail is slimmer still. The listings cited here show terminal posts at 2-3/8 inch outside diameter, line posts at 1-7/8 inch, and top rail pipe at 1-3/8 inch. Lengths in the listings run 6 ft and 8 ft for terminal posts, 6 ft for line posts, and 8 ft for rail pipe.
| Post | Outside diameter | Lengths in the listings | Where it goes |
|---|---|---|---|
| Terminal post | 2-3/8 in | 6 ft, 8 ft | Ends, corners and gate sides |
| Line post | 1-7/8 in | 6 ft | Between terminal posts, along the run |
| Top rail pipe | 1-3/8 in | 8 ft | Across the top of the fence |
| BTRAM extender | Fits 1-3/8 in rail | 20 in | Adds height to an existing fence |
| Leriton extender | Fits 1-5/8 in post | 2 ft | Adds height to an existing fence |
Terminal posts: the anchors
Terminal posts sit at the end, corner or gate section of a chain link fence, where strength and stability matter. The listings show Fencer Wire terminal posts at 2-3/8 inch outside diameter: an 8 ft black post in a pack of 5, and a 6 ft galvanized post sold singly. A Teal Turtle terminal post (on Amazon) lists the same size, 2-3/8 in by 6 ft, in a pack of 2, in 16 gauge steel tube with a galvanized, zinc coated finish. The 2-3/8 inch diameter fits standard chain link terminal hardware including tension bands, end caps and gate hardware, per the listings. The 6 ft galvanized Fencer Wire post lists a weight of 11.33 pounds.
Line posts: the middle of the run
Line posts run between the terminal posts along the fence. The Fencer Wire line post lists a 1-7/8 inch outside diameter and a length of 6 ft, in black powder coat over galvanized steel, at 6.71 pounds. It can be driven into the ground or set in concrete, per the listing, and fits standard chain link fence parts including caps and rails. Line posts suit residential, commercial and agricultural fencing projects, per the listing.
Top rails and pipe
The top rail runs across the top of the fence and ties the posts together. Master Halco lists 1-3/8 inch by 8 ft galvanized pipe in 18-gauge, in a set of 4 pieces, for chain link fence, gates and posts. The BTRAM extension (on Amazon) fits a 1-3/8 inch outside diameter top rail, so the rail size and the extender size match. Check the rail diameter against the fittings before ordering, since caps and bands are sized to the rail.
Post extenders: adding height
An extender adds height without a new fence. The BTRAM extender adds 20 inches of fence height with a 2.2 inch bracket and a frame thickness of 3mm, fits a 1-3/8 inch top rail, and adjusts from vertical to 90 degrees, in an 18 pack with bolts and nuts included. The Leriton extender (on Amazon) adds 2 ft, slides over 1-5/8 inch posts on a 3-inch deep insertion sleeve, uses 2mm thickened steel with a hot-dipped galvanized coating, and comes in a 5 pack with screws and post caps. Leriton states the extender turns a 4 ft fence into a 6 ft barrier. Extenders also suit privacy screens, sunshades and nets, per the listings.
Gauge, coating and setting
Wall thickness and coating shape how long a post lasts outdoors. The Teal Turtle terminal post lists a 16 gauge steel tube wall, while the Master Halco pipe (on Amazon) lists 18-gauge. Coatings in the listings run from galvanized and hot-dip galvanized steel to black powder coat over galvanized steel, which the listings describe as dual-layer protection against rust, chipping and corrosion. The Fencer Wire terminal posts can be set in concrete or ground-mounted, and the line post can also be driven into the ground. For the hole, see our electric post hole digger for rocky soil guide.
Measure before you order
Measure the height needed and check the diameter of caps, bands and other fittings before ordering, so the posts match the rest of the chain link framework. A terminal post that does not match the fittings will not take the tension bands and end caps the fence needs. Count the corners and ends of the run first, since each corner and end needs a terminal post, and each gate side does too. Then count the line posts between them. For the run itself, see our fox proof walk in chicken run guide, and for the gate hardware see chain link fence locks for outdoor gates.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What size post do I need for a chain link fence?
Use a 2-3/8 inch terminal post at the ends, corners and gate sides, and a 1-7/8 inch line post between them. Top rail pipe in the listings is 1-3/8 inch by 8 ft. Match the diameter to the caps, bands and fittings on the fence.
How tall should a chain link fence post be?
The listings show terminal posts at 6 ft and 8 ft, and line posts at 6 ft. Measure the height needed before ordering, and check the diameter of the caps and bands so the posts match the rest of the framework.
What is the difference between a terminal post and a line post?
A terminal post anchors the end, corner or gate section of the fence and lists a larger outside diameter, 2-3/8 inch. A line post runs between terminal posts along the fence and lists a smaller outside diameter, 1-7/8 inch.
Can I make a chain link fence taller?
Yes, with a post extender. The BTRAM extender adds 20 inches and fits a 1-3/8 inch top rail, while the Leriton extender adds 2 ft and fits 1-5/8 inch posts. Leriton states the extender turns a 4 ft fence into a 6 ft barrier.
What gauge are chain link fence posts?
Gauge varies by listing. The Teal Turtle terminal post lists a 16 gauge steel tube wall, and the Master Halco pipe lists 18-gauge. Check the gauge on the listing before ordering.
More coop guides
- Best Fox Proof Walk in Chicken Run (2026)
- Best Chain Link Fence Locks for Outdoor Gates (2026)
- Best Field Fence Post Caps (2026): 5 Picks for Wood, Vinyl and Chain Link
- Manual Fence Post Driver: How to Choose the Right One
See the chicken runs and fencing guides and the field fence post caps picks.




