Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How Much Does a Chain Link Fence Gate Cost: Price Guide

A chain link fence gate for a chicken run costs what its size, mesh and hardware dictate: this guide matches gate sizes and fittings to the run opening.

How Much Does a Chain Link Fence Gate Cost: Price Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR Chain Link Fence Gate Fit 2.2-6 ft x 6 ftVEVOR Chain Link Fence Gate Fit 2.2-6 ft x 6 ft9.6/10View on Amazon
  2. 2Kicari 26-72 in W x 48 in H Chain Link Fence GateKicari 26-72 in W x 48 in H Chain Link Fence Gate9.6/10View on Amazon
  3. 3VEVOR Chain Link Fence Gate Fit 3 x 4 ft for YardVEVOR Chain Link Fence Gate Fit 3 x 4 ft for Yard9.5/10View on Amazon
  4. 4WRINGKIT 4 Pack Chain Link Fence Gate CornersWRINGKIT 4 Pack Chain Link Fence Gate Corners9.4/10View on Amazon

Morning chores end at the run gate: the latch sticks, the frame drags, and the hens wait behind wire while the keeper wrestles it open. A gate that fits its opening and swings clean turns that daily wrestle into a quick step through. The question of how much does a chain link fence gate cost comes down to the gate itself: its size, its mesh, its frame, and the latch, hinges and corners that hold it together.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

VEVOR Chain Link Fence Gate Fit 2.2-6 ft x 6 ft
VEVOR9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 72 x 48 in galvanized steel gate with 2.5 x 2.5-inch mesh for openings from 24 to 72 inches, with latch, hinges and cable ties in the box.

VEVOR lists this gate at 72 x 48 in, with a galvanized steel frame and tightly woven chain links in a 2.5 x 2.5-inch mesh, and says it fits openings from 24 to 72 inches. The maker lists a weight of 22.05 pounds and includes the door frame, latch, hinges and cable ties, with full installation accessories and instructions.

Pros

  • Galvanized steel frame with tightly woven chain links
  • Fits openings from 24 to 72 inches
  • Latch, hinges and cable ties included in the box
  • 2.5 x 2.5-inch mesh stated for the gate

Cons

  • Posts are not included
  • No warranty term is stated
  • Suits 40/42mm posts, so other post sizes need checking
  • One size only in this listing: 72 x 48 in
Kicari 26-72 in W x 48 in H Chain Link Fence Gate
Kicari9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An adjustable PVC-coated galvanized steel gate kit, 26 to 72 inches wide and 48 inches high, with poles, chain link roll, tension bars, gate clips and metal ties.

Kicari lists this gate kit at 26 to 72 inches wide and 48 inches high, with a galvanized steel frame and PVC coating, and the width adjusts by cutting the horizontal poles to size. The box holds 2 vertical poles, 2 horizontal poles, 1 chain link roll, 2 tension bars, 8 gate clips and 10 metal ties. The maker lists the weight as 17.0 pounds.

Pros

  • Width adjusts from 26 to 72 inches to fit the opening
  • PVC-coated galvanized steel frame resists rust
  • Round corner frame stated as safe for pets and family
  • Full kit: poles, chain link roll, tension bars, gate clips and metal ties

Cons

  • Gate needs assembly, including cutting the horizontal poles to size
  • No warranty term is stated
  • Stand stakes are not included, though the kit needs them or garden netting wire
  • 48 inch height is fixed
VEVOR Chain Link Fence Gate Fit 3 x 4 ft for Yard
VEVOR9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A galvanized steel gate with 2.5 x 2.5-inch mesh and 0.09 in wire diameter that fits openings from 24 to 72 inches.

VEVOR lists this gate with a galvanized steel frame in Q235 metal, 2.5 x 2.5-inch mesh and a wire diameter of 0.09 in, and says it fits openings from 24 to 72 inches. The box includes the door frame, latch, hinges and cable ties, with full installation accessories and instructions. The maker gives the gate as 70 x 72 in in one place and 3 x 4 ft in the title, so check the size before ordering.

Pros

  • Galvanized steel frame in Q235 metal
  • 2.5 x 2.5-inch mesh with 0.09 in wire diameter stated
  • Fits openings from 24 to 72 inches
  • Latch, hinges and cable ties included

Cons

  • Posts are not included
  • No PVC coating is stated; the finish is bare galvanized steel
  • Mesh is fixed at 2.5 x 2.5-inch
  • A single gate is in the box
WRINGKIT 4 Pack Chain Link Fence Gate Corners
WRINGKIT9.4/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 pack of aluminum gate corners with bolts for 1-3/8 in outside diameter pipe, with a 90 degree angle design.

WRINGKIT lists a 4 pack of aluminum gate corners with matching bolts, made to fit 1-3/8 in outside diameter pipe, with pre-drilled holes and a 90 degree angle design. The maker lists the corners at 3.74 x 3.74 x 1.57 in and says they suit building a new gate or reinforcing one.

Pros

  • 4 pack covers a full gate frame with matching bolts
  • Fits 1-3/8 in outside diameter pipe with a snug joint
  • Aluminum resists rust and corrosion
  • Pre-drilled holes, so no punching or welding is needed

Cons

  • Corners only; no pipe, mesh, latch or hinges included
  • Fits 1-3/8 in pipe only
  • Pipe measurements must be checked before purchase
  • Only the 1-3/8 in size is offered in this 4 pack

A chain link fence gate has no single price on its own: the listing price follows the gate size, the mesh, the frame metal and the hardware in the box. A wider fixed-size gate uses more frame and mesh, and a kit with latch, hinges and cable ties covers more of the job than a bare panel. The picks in this guide show the range: adjustable galvanized gates in more than one size, and a set of corners for building a gate frame from pipe.

Size leads the list. The VEVOR gates fit openings from 24 to 72 inches, and the Kicari kit adjusts from 26 to 72 inches wide. Measure the opening at the posts and match the gate to that width; the posts are not included with the gates here.

Mesh and frame come next. Both VEVOR gates use a 2.5 x 2.5-inch mesh in a galvanized steel frame, and the VEVOR gate listed at 70 x 72 in states a wire diameter of 0.09 in. The Kicari gate adds a PVC coating over galvanized steel, and the corners here are aluminum, which the maker states resists rust and corrosion. A chain link fence gauge chart explains the mesh numbers, and the chain link vs welded wire comparison covers the mesh choice for a run.

Hardware is the rest. The VEVOR gates include the door frame, latch, hinges and cable ties, while the Kicari kit includes poles, a chain link roll, tension bars, gate clips and metal ties. The corners come as a 4 pack with matching bolts for 1-3/8 in pipe. The guide to using chain link fence ties covers the ties that hold mesh to the frame.

Gates and hardware for the run opening

Each pick below matches a step in the job: measure the opening, choose a gate that fits it, then add the latch, hinges or corners that hold it square.

Measure the opening before you order

Measure the opening between the posts before ordering, since the VEVOR gates fit openings from 24 to 72 inches and the Kicari kit adjusts from 26 to 72 inches. A gate that matches the opening hangs square and latches clean; the Kicari kit is the pick for an opening that needs the poles cut to size. The chain link fence post size guide covers post sizes, and the chain link fence post cost guide covers posts and fittings, since posts are not in the box with these gates.

Check the pipe size too when the job includes corners. The WRINGKIT corners fit 1-3/8 (on Amazon) in outside diameter pipe, with pre-drilled holes and bolts, so the pipe on hand must match. The how long chain link fence lasts guide covers galvanized mesh and fittings over time.

A short checklist before you buy

  • Opening measured between the posts
  • Latch, hinges and ties in the box
  • Pipe size checked against the corners, where corners are used
Chicken Coop Size Calculator

Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.

Open the calculator
Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

How much does a chain link fence gate cost?

There is no single figure to quote: the cost follows the gate size, the mesh, the frame metal and the hardware in the box. The VEVOR gates here fit openings from 24 to 72 inches, and the Kicari kit adjusts from 26 to 72 inches.

What size gate fits a chicken run opening?

Measure the opening between the posts, then choose a gate that fits it: the VEVOR gates fit openings from 24 to 72 inches, and the Kicari kit adjusts from 26 to 72 inches wide with a height of 48 inches.

Do chain link fence gates include posts?

No: the VEVOR gates state that posts are not included, and the Kicari kit needs stand stakes or garden netting wire.

What mesh size suits a chicken run gate?

The two VEVOR gates use a 2.5 x 2.5-inch mesh in a galvanized steel frame, which VEVOR states keeps small animals out. The Kicari kit states no mesh size.

Can a gate frame be built from pipe and corners?

Yes, with the right pipe: the WRINGKIT corners fit 1-3/8 in outside diameter pipe and come as a 4 pack with matching bolts, with pre-drilled holes so no punching or welding is needed.

More coop guides

See the chicken run set up guide and the chain link fence post cost guide.

More buying guides