Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Hasp Types for Coop Doors and Gates Compared

Four hasp types for coop doors and gates compared by size, steel, fitting and padlock use, with latches from 3 inches to 10 inches.

Hasp Types for Coop Doors and Gates Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Alise 10 in SUS 304 Stainless Steel Hasp LatchAlise 10 in SUS 304 Stainless Steel Hasp Latch9.5/10View on Amazon
  2. 2JQK 5 in 304 Stainless Steel Door Hasp LatchJQK 5 in 304 Stainless Steel Door Hasp Latch9.5/10View on Amazon
  3. 3Hedume 10 Pack 4.2 in Stainless Steel Hasp LatchHedume 10 Pack 4.2 in Stainless Steel Hasp Latch9.5/10View on Amazon
  4. 4KIMIWISE 3 in Stainless Steel Hasp LatchKIMIWISE 3 in Stainless Steel Hasp Latch9.4/10View on Amazon

The pop door sticks, the latch will not catch, and the flock is out before the morning feed is done. Hasp types are the small latches that hold a coop door or gate shut, and the right one is the size and steel that fits the door it guards. This guide compares four hasps by size, steel, fitting and padlock use.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Alise 10 in SUS 304 Stainless Steel Hasp Latch

Alise 10 in SUS 304 Stainless Steel Hasp Latch

Alise9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 inch SUS 304 stainless steel hasp latch in black, about 209 g, with 8 screws included, for doors, cabinets, fences and barns.

Who it's for: anyone who wants the longest hasp here for a gate or a barn door.

Who should skip it: anyone fitting a small cabinet or drawer.

Alise lists a 10 inch hasp latch in SUS 304 stainless steel with a matte black finish. The latch is 10 inches long by 1.58 inches wide, weighs about 209 g, and comes with 8 screws. The maker describes heavy duty solid steel that withstands impact, and the latch suits doors, cabinets, wardrobes, fences, drawers, barns, boxes and sliding doors.

Pros

  • 10 inch size, the longest here, for gates and barn doors
  • SUS 304 stainless steel with a matte black finish
  • 8 screws included
  • Heavy duty solid steel, made to withstand impact

Cons

  • 10 inch size needs the most door space of the four
  • About 209 g, the heaviest stated weight here
  • Black finish only; no silver stated
  • Too long for a small cabinet or drawer
JQK 5 in 304 Stainless Steel Door Hasp Latch

JQK 5 in 304 Stainless Steel Door Hasp Latch

JQK9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 inch 304 stainless steel hasp latch in matte black, 1.9 mm thick, with stainless steel screws included, for doors, gates and cabinets.

Who it's for: anyone who wants a mid-size 304 stainless steel hasp for a coop door.

Who should skip it: anyone fitting a large gate or barn door.

JQK lists a 5 inch door hasp latch in solid 304 stainless steel with a matte black finish. The clasp is 1.9 mm thick, fits left or right hand applications, and comes with stainless steel screws. The maker describes it as rust-proof and strong, for security on doors, chests, fridges, boxes, gates, cupboards, drawers and cabinets.

Pros

  • 304 stainless steel, 1.9 mm thick
  • Fits left or right hand doors
  • Stainless steel screws included
  • Matte black finish resists rust

Cons

  • Too short for a large gate or barn door
  • Black finish only; no silver stated
  • Suits doors and cabinets, but the 10 inch Alise suits larger doors
  • No adjustable staple is stated for a sagging door
Hedume 10 Pack 4.2 in Stainless Steel Hasp Latch

Hedume 10 Pack 4.2 in Stainless Steel Hasp Latch

Hedume9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 pack of 4.2 by 1.6 inch stainless steel hasp latches with a brushed finish, 9 mounting screws per latch, for doors, gates and sheds.

Who it's for: anyone fitting several doors at once who wants one pack to cover them.

Who should skip it: anyone who needs a single latch or a longer hasp for a large gate.

Hedume lists a 10 pack of stainless steel hasp latches, each 4.2 by 1.6 inches with a brushed finish. Each latch comes with 9 mounting screws, for 90 screws in the pack, and the adjustable staple helps when a door shrinks or sags. The multi-layer electroplating resists rust, and the latches suit doors, residential gates, sheds, cabinets, drawers, cupboards and storage containers.

Pros

  • 10 latches in one pack for several doors
  • 9 mounting screws per latch, 90 screws in the pack
  • Adjustable staple helps with a sagging door
  • Brushed stainless steel finish resists rust

Cons

  • 4.2 inch size is shorter than the 5 and 10 inch hasps
  • No warranty term is stated
  • Silver finish only; no black stated
  • 10 pack suits several doors, but not a buyer who needs one latch
KIMIWISE 3 in Stainless Steel Hasp Latch

KIMIWISE 3 in Stainless Steel Hasp Latch

KIMIWISE9.4/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3 inch stainless steel hasp latch in black, 0.16 pounds, with a multi-hole design and screws included, for gates, doors and cabinets.

Who it's for: anyone who wants the smallest hasp here for a cabinet or a small door.

Who should skip it: anyone fitting a large gate or barn door.

KIMIWISE lists a 3 inch stainless steel hasp latch in black, weighing 0.16 pounds. The multi-hole design fixes firmly, the latch installs at 90 degrees or 180 degrees with a maximum closing angle of 300 degrees, and screws are included. The maker describes heavy duty thickened steel that resists rust, for gates, bedroom doors, cabinets, sheds, windows, pet doors and drawers.

Pros

  • 3 inch size, the smallest here, for cabinets and small doors
  • Multi-hole design fixes firmly
  • Installs at 90 degrees or 180 degrees, up to 300 degrees
  • 0.16 pounds, the lightest stated weight here

Cons

  • 3 inch size is too short for a large gate
  • No warranty term is stated
  • Single latch, not a pack
  • Black finish only; no silver stated

Hasp types, from maker listings

Four hasps here run from 3 inches to 10 inches, all stainless steel, all with screws included and all padlock-ready. The smallest is a 3 inch latch for cabinets and small doors, the largest is a 10 inch latch for barn doors and fences, and a 10 pack of 4.2 inch latches covers several doors at once.

Size: match the hasp to the door

Measure the door first: the hasps here are 3, 4.2, 5 and 10 inches long. A 3 inch hasp suits a cabinet or a small door, a 5 inch hasp suits a coop door, and a 10 inch hasp suits a barn door or a fence. The 4.2 inch hasp comes in a 10 pack, so one pack covers several doors at once.

Steel and finish

All four hasps are stainless steel, which resists rust. Two name 304 stainless steel: the 5 inch JQK and the 10 inch Alise, both in matte black. The 3 inch KIMIWISE is stainless steel in black, and the 10 pack is stainless steel with a brushed finish in silver. Matte black suits a dark coop door, brushed silver a lighter one.

Fitting: left, right and angle

Fitting is where the four differ most. The 5 inch JQK fits left or right hand doors, and the 10 pack has an adjustable staple that helps when a door sags or shrinks. The 3 inch KIMIWISE installs at 90 degrees or 180 degrees, with a maximum closing angle of 300 degrees, so the angle can be set to the door. Check that the hasp sits flat on the door and the frame.

Padlock use

Every hasp here pairs with a padlock for extra security. The 3 inch KIMIWISE has a multi-hole design that fixes firmly and pairs with a padlock, and the 10 inch Alise adds an extra layer of protection with a padlock. The 5 inch JQK is made for security applications on doors, chests and gates, and the 10 pack suits doors, gates, sheds and storage containers. Check that the padlock fits the hasp before the first use.

Hasps for the coop door

The four hasps below cover the sizes a coop door needs, from a 3 inch latch for a cabinet to a 10 inch latch for a barn door.

Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

What size hasp do I need for a coop door?

The hasps here run from 3 inches to 10 inches. A 3 inch hasp suits a cabinet or a small door, a 5 inch hasp suits a coop door, and a 10 inch hasp suits a barn door or a fence.

What is a hasp used for?

A hasp holds a door or gate shut and pairs with a padlock for extra security. The four here suit coop doors, gates, sheds, cabinets and drawers.

Are stainless steel hasps rust proof?

The makers state their stainless steel hasps resist rust: the JQK is described as rust-proof, the Alise and KIMIWISE as not easy to rust, and the Hedume as treated with multi-layer electroplating to prevent rusting. Two name 304 stainless steel, the 5 inch JQK and the 10 inch Alise.

Can a hasp fit a left or right hand door?

The 5 inch JQK fits left or right hand doors, and the 10 pack has an adjustable staple that lets the latch sit on either side of an opening. Check the fitting before ordering.

How many screws come with a hasp?

The 10 inch Alise includes 8 screws, and each latch in the 10 pack comes with 9 mounting screws, for 90 screws in the pack. The 5 inch JQK and the 3 inch KIMIWISE both state screws included.

More coop guides

See every coop door and automation guide. Also see our chicken coop door latch guide, our door latch for padlock guide and our chain link fence gate latch types guide.

More buying guides