Chain Link Fence Gate Latch Types Compared
Fork, wall-mount and double gate latches compared, with the sizes and padlock holes that suit a chicken run gate.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
BiJun Chain Link Double Gate Latch for 1-1/4 Inch9.6/10View on Amazon - 2
Wmebee 1-3/8 x 2-3/8 in Chain Link Fence Gate Fork9.6/10View on Amazon - 3
MLHpeak 1-3/8 in Fork Latch9.5/10View on Amazon - 4
Ayxwkyfc 1-3/8 in Flat Back Wall Mount Chain Link9.5/10View on Amazon
A run gate that swings free is a flock out on the lane before breakfast is on the table. The latch is the small piece of hardware that keeps the gate shut between chores, and chain link fence gate latch types differ mainly in how they mount and what they mount to. This guide explains the kinds that fit a chain link run gate and which latch suits a gate, a wall post or a double gate.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

BiJun Chain Link Double Gate Latch for 1-1/4 Inch
A double gate latch for 1-1/4 in gate frames in heavy-duty galvanized steel, with a strong arm design, padlock holes and a stated 2.5 to 4 in frame gap.
Who it's for: a keeper with a double gate on a run, ranch fence or yard gate who wants a strong arm latch with a padlock hole.
Who should skip it: anyone with a single gate, or a frame gap outside 2.5 to 4 inches.
BiJun lists the double gate latch at 6.0 x 2.3 x 2.0 in and 2.2 pounds, in black, for 1-1/4 in gate frames, with a gap of at least 2.5 inches to 4 inches between the two door frames, heavy-duty galvanized steel, a strong arm design with a padlock hole and horizontal adjustment.
Pros
- Heavy-duty galvanized steel for outdoor weather
- Strong arm double gate design with padlock holes
- Fits 1-1/4 in gate frames with a stated 2.5 to 4 in frame gap
- Horizontally adjustable, installs with U-bolt nuts
Cons
- Only fits 1-1/4 in gate frames, so measure first
- Needs a 2.5 to 4 in gap between the two door frames
- No padlock is stated as included
- Black finish only in the listing

Wmebee 1-3/8 x 2-3/8 in Chain Link Fence Gate Fork
A galvanized fork latch for 1-3/8 x 2-3/8 in gate frames and posts, with a padlock hole and a 90° range of motion.
Who it's for: a keeper with a measured 1-3/8 x 2-3/8 in gate frame and post.
Who should skip it: anyone whose frame diameters differ, or who needs a wall-mount latch.
Wmebee lists the fork latch at 8.0 x 5.0 x 1.0 in, model FGFL-L, in silver, for 1-3/8 x 2-3/8 in outside diameters, with a flexible joint giving a 90° range of motion, galvanized steel with strong hardness and high corrosion resistance, and a hole for a padlock. The listing also names other sizes, including 1-3/8 x 1-3/8 in and 1-5/8 x 4 in.
Pros
- Fits 1-3/8 x 2-3/8 in gate frames and posts
- Padlock hole for added security
- Flexible joint with a 90° range of motion
- Galvanized steel with high corrosion resistance
Cons
- Fits only 1-3/8 x 2-3/8 in outside diameters
- No mounting hardware is stated
- No warranty term is stated
- No padlock is stated as included

MLHpeak 1-3/8 in Fork Latch
A pack of 2 galvanized fork latches for 1-1/4 to 1-3/8 in gate and panel frames, designed to resist dogs opening the gate, with a padlock hole.
Who it's for: a keeper with two gates to latch, or one gate plus a spare.
Who should skip it: anyone whose frames fall outside 1-1/4 to 1-3/8 in, or who needs a wall-mount latch.
MLHpeak lists the fork latch at 6.0 x 1.0 x 1.0 in, model FolkLatch2, in galvanized steel, for gate frames and panel frames from 1-1/4 in to 1-3/8 in, with a padlock hole, a design that resists dogs accidentally opening the gate, and about 1 inch of spacing between the gate and the panel. The title says pack of 2, while the spec table says 1 item; the title and bullets are the safer guide here.
Pros
- Pack of 2 covers two gates
- Designed to resist dogs accidentally opening the gate
- Galvanized steel to prevent rust and corrosion
- Fits 1-1/4 to 1-3/8 in gate and panel frames
Cons
- Needs about 1 in spacing between gate and panel
- No warranty term is stated
- No mounting hardware stated

Ayxwkyfc 1-3/8 in Flat Back Wall Mount Chain Link
A flat back wall-mount latch in galvanized steel for 1-3/8 in chain link fence pipe gate posts, with a padlock hole and nuts and bolts included.
Who it's for: a keeper whose gate closes against a wall, a wood post or a flat surface.
Who should skip it: anyone who needs a fork latch for a round frame, or a stated size before ordering.
Ayxwkyfc lists the latch for 1-3/8 in chain link fence pipe gate posts, stated as 1-1/2 in OD, in galvanized steel, with a padlock hole and included nuts and bolts. The spec table lists product dimensions of 0.1 x 0.1 x 0.1 in, which cannot be right for a gate latch, so the latch's own dimensions are not usable. The listing states mounting on walls, wood posts or flat vertical surfaces, for commercial and residential use.
Pros
- Mounts on walls, wood posts or flat vertical surfaces
- Fits 1-3/8 in (1-1/2 in OD) chain link fence pipe gate posts
- Padlock hole for added security
- Nuts and bolts included for mounting
Cons
- No weight is stated
- Padlock not included
- No warranty term is stated
Chain link fence gate latch types at a glance
A fork latch fits the gate frame and the post and holds the gate shut. The Wmebee fork latch (on Amazon) fits 1-3/8 x 2-3/8 in outside diameters, and the MLHpeak fork latch (on Amazon) fits gate frames and panel frames from 1-1/4 in to 1-3/8 in. Both latches have a padlock hole, and the Wmebee latch adds a flexible joint with a 90° range of motion.
The listing also calls the MLHpeak latch a butterfly latch, and it comes as a pack of 2, with a design that resists dogs accidentally opening the gate. A flat back wall-mount latch suits a gate that closes against a wall, a wood post or a flat vertical surface. The Ayxwkyfc latch (on Amazon) fits 1-3/8 in chain link fence pipe gate posts, stated as 1-1/2 in OD, and mounts with included nuts and bolts.
A double gate latch spans two gate leaves. The BiJun latch (on Amazon) fits 1-1/4 in gate frames, with a strong arm design and a padlock hole, and it needs a gap of at least 2.5 inches to 4 inches between the two door frames.
Measure the gate before ordering
Measure the outside diameters of the gate frame and the fence post before ordering, and measure the distance between the posts. The Wmebee listing states that all measurements are the outside diameters of gate frames and fence posts.
Chain link gate latches for a chicken run gate
Once the gate frame and post diameters are measured, these latches cover the mounting shapes a run gate needs. See also the best chain link gate latch under 20 guide for more latch picks.
Padlocks, pets and keeping the gate shut
Every latch here has a padlock hole, and a padlock adds a lock the latch alone lacks. The Ayxwkyfc latch states that the padlock is not included. The MLHpeak latch is designed to resist dogs accidentally opening the gate. The BiJun latch pairs its strong arm design with a padlock hole, and the listing states gate latches for metal gates can effectively stop unauthorized opening. The latch vs lock comparison explains when a latch alone is enough and when a lock earns its place.
Fitting a latch and keeping it working
Fit each latch where its listing says it mounts, tighten the fixings, and check the gate swings and shuts. The BiJun latch installs by aligning the strong arm with one side of the gate, then reinstalling the U-bolt nuts and tightening them, and it adjusts horizontally to suit the gate. The Ayxwkyfc latch mounts with included nuts and bolts.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What size fork latch fits a chain link gate?
Measure the outside diameter of the gate frame and the post, then match the latch to them. The Wmebee fork latch fits 1-3/8 x 2-3/8 in, and the MLHpeak fork latch fits frames from 1-1/4 in to 1-3/8 in.
Can a chain link gate latch keep a dog from opening the gate?
The MLHpeak latch is designed to resist dogs accidentally opening the gate, and a padlock through the padlock hole adds a lock.
Is a padlock needed with a chain link gate latch?
The latch holds the gate shut without one, but every latch here has a padlock hole for added security. The Ayxwkyfc latch states that the padlock is not included, so buy one separately if a lock is wanted.
What gap is needed between double gates for a double gate latch?
The BiJun double gate latch needs a gap of at least 2.5 inches to 4 inches between the two door frames. Measure the gap before ordering, and check that nothing blocks the strong arm.
Will a galvanized gate latch rust in a chicken run?
The listings state that galvanized steel prevents rust and corrosion. The Wmebee latch is described as not easy to rust, and the BiJun latch is built from heavy-duty galvanized steel for all types of weather outdoors.
More coop guides
- Best Chain Link Gate Latch (2026)
- Best Chain Link Gate Latch Under $20 (2026): 5 Gate Latch Picks
- Chain Link Fence Gauge Chart: What the Numbers Mean for a Chicken Run
- Chain Link vs Welded Wire Chicken Run: Which Should You Build?
- How to Use Chain Link Fence Ties
- Chain Link Fence Post Size: Terminal, Line and Rail Sizes
- Best Chicken Coop Door Latch Under $12 (2026): 5 Picks
- Latch vs Lock for Chicken Coop: Which One Should You Buy?
See the best chain link gate latch guide for more latch picks.




