How to Set Fox Trap: A Live Trap Guide for the Coop
A live-trap guide for chicken keepers that covers trap size, trigger setup, bait placement and the daily check routine.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
BYRPRO Collapsible Live Animal Trap Cage, 42.59.7/10View on Amazon - 2
Humane Way Folding 50 Inch Live Animal Trap9.6/10View on Amazon - 3
KOCASO 37 x 14 x 15 in Large Live Animal Trap9.5/10View on Amazon - 4
KMSUPERB Squirrel and Chipmunk Trap, Live Cage9.3/10View on Amazon
A fox at the coop usually leaves the same signs: a missing hen at dawn, feathers near the run fence and a gap dug under the wire. This guide explains how to set fox trap cages for a live catch: pick a cage sized for a fox, set it where the fox already travels and set the trigger so the door closes behind the fox.
A live cage trap holds the fox unharmed until the keeper checks it. The steps below cover size, spot, trigger, bait and the daily check.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

BYRPRO Collapsible Live Animal Trap Cage, 42.5
A 42.5 in collapsible live trap with 2.0mm steel wire, a reinforced frame, an anti-escape trap door, tight mesh and gloves included.
Who it's for: a keeper who wants a fox-sized folding trap with a firm-closing door and gloves in the box.
Who should skip it: anyone needing a stated rust coating or longer warranty.
Byrpro lists the LT425 at 42.5 x 15.7 x 17.7 in, built from 2.0mm steel wire with spot-welded joints and a reinforced frame. Its trigger plate trips an anti-escape door that closes firmly, and tight mesh reduces escape gaps. Note the title states 42.5 in and the spec table 45.0 in, so the title and bullets are the safer guide to size.
Pros
- 2.0mm steel wire with spot-welded joints and a reinforced frame
- Anti-escape trap door that closes firmly once the trigger plate trips
- Tight mesh spacing that helps reduce escape gaps
- Folds flat for storage and includes a pair of protective gloves
Cons
- Interior space is slightly smaller than the outer size, per the listing
- No galvanized coating is stated for the wire
- Warranty covers one year only

Humane Way Folding 50 Inch Live Animal Trap
A 50 in folding live trap with thicker galvanized and powder-coated wires, a gravity door, small mesh holes and handles on both ends.
Who it's for: a keeper who wants the roomiest fox-sized trap, a fast gravity door and a rust-resistant coating.
Who should skip it: anyone wanting a stated warranty or gloves in the box.
Humaneway lists this folding trap at 50.0 x 20.0 x 26.0 in, the largest trap here, with thicker wires, a reinforced door and latches, and galvanized and powder-coated wire. Its gravity door closes fast with little air resistance, small mesh holes prevent stolen bait, and handles on both ends ease lifting. The black anti-glare coating camouflages it in the dark, and the trigger rod sits outside the trap so a caught animal cannot damage it. It folds nearly flat and assembles in seconds, tool-free.
Pros
- Largest trap here at 50 x 20 x 26 in, with room for a fox
- Thicker wires with a reinforced door and latches
- Galvanized and powder-coated wires resist rust and corrosion
- Black anti-glare coating gives camouflage in the dark
Cons
- No warranty term is stated
- No weight is stated, so carry weight is unknown
- Mesh size is described only as small, with no measurement stated
- No gloves are stated as included in the listing

KOCASO 37 x 14 x 15 in Large Live Animal Trap
A 37 in folding live trap in heavy-duty galvanized wire mesh, rated for animals under 55 lb, with a spring-loaded front door, a rear release door and gloves.
Who it's for: a keeper who wants a mid-size fox trap, a rear release door and a handle guard plate.
Who should skip it: anyone wanting the longest trap here or a stated warranty.
KOCASO lists this trap at 37.0 x 14.0 x 15.0 in and 11.9 lb, in heavy-duty galvanized wire mesh, rated for animals under 55 lb, which covers a fox. A sensitive trigger and spring-loaded front door close on a light touch of the pedal, and a rear door makes release simple. The trigger rod sits outside the cage, safe from a trapped animal, and the upgraded handle's guard plate prevents scratches while moving the trap. It folds for storage, assembles in minutes, and gloves are included.
Pros
- Rated for animals under 55 lb, which covers a fox
- Spring-loaded front door closes on a light touch of the pedal
- Rear door gives an easy release without reaching through the front
- Ergonomic handle with a guard plate protects the hand while carrying
Cons
- No warranty term is stated
- At 37 in long it is shorter than the larger traps here
- No mesh spacing measurement is stated
- Folding design needs the U-shaped rod and trigger rod fitted at setup

KMSUPERB Squirrel and Chipmunk Trap, Live Cage
A 16.3 in live cage in galvanized steel with a sensitive pedal and a bait zone, sized for squirrels, chipmunks, rats and small rodents.
Who it's for: a keeper dealing with squirrels or chipmunks in the garden, not a fox at the coop.
Who should skip it: anyone setting a trap for a fox, which needs a much larger cage.
KMSUPERB lists this cage at 16.3 x 6 x 6.7 in, built from galvanized steel with reinforced mesh. A high-sensitivity trigger plate snaps the trap shut when an animal steps inside, the external trigger system sits safe from interference, and the bait area is placed so animals cannot steal food without entering. A covered handle eases carrying and relocation. It names squirrels, chipmunks, rats, voles and similar-sized rodents, and at 16.3 in long this is a small-animal trap: a fox will not fit inside it.
Pros
- Sensitive pedal snaps the trap shut when an animal steps inside
- Bait area is placed to stop animals stealing food without entering
- Galvanized steel and reinforced mesh resist rust, corrosion and gnawing
- Lightweight and compact with a covered handle for safe relocation
Cons
- At 16.3 in long it is sized for small rodents, not a fox
- No warranty term is stated
- No door type beyond the trigger plate is stated
- No gloves are stated as included in the listing
How to set fox trap: start with the right size
A fox needs a large live cage, so size comes first. The traps here run from a 16.3 in cage sized for squirrels and chipmunks up to a 50 in folding trap with room for a fox, and only the larger cages suit this job. A cage that is too short lets a fox reach the bait without stepping on the trigger plate, and a fox that steals bait without tripping the door learns to avoid it. The extra large fox trap picks compare the roomiest cages, and the best fox traps guide covers live traps for the coop and run.
Pick a spot where the fox already travels
Foxes follow fence lines, hedges and the edges of the run, returning to a gap that worked once. Set the trap on level ground beside the run fence or near the hole where feathers or tracks show, with the open door facing the direction the fox comes from. Keep it out of the hens’ path, clear leaves and loose wire from around the door, and tuck it beside a fence or hedge where a fox feels safe to step in.
Set the trigger plate and the door
Every live trap here closes when the fox steps on a trigger plate or pedal on its way to the bait, so set the plate with care. Raise the door, lock the trigger rod in place and press the plate lightly to check it trips with a touch. On the Humaneway, KOCASO and KMSUPERB traps (on Amazon) the trigger rod sits outside the cage, where a caught animal cannot damage it. If the door sticks or the plate needs a hard press, reset it and clear bedding or bait from under the plate. See the guide to opening an animal trap before handling a set trap, and wear gloves to set and carry it.
Bait the far end of the trap
Bait goes at the far end of the cage, past the trigger plate, so the fox must walk fully inside and step on the plate to reach it. Food near the door lets a fox eat without tripping anything, while food past the plate puts its weight where the trap needs it. Use a small amount of bait, set it deep in the cage and check none sits on or under the plate.
The live traps for this job
Setting the trap takes a folding live cage sized for a fox, a trigger plate that closes the door fast and a safe way to release the catch.
Check the trap on a daily routine
A set trap needs checking every day, morning and evening, so a caught fox is not left waiting. Carry the trap by its handle where it has one, keep fingers clear of the door and wear gloves when lifting a cage with an animal inside. Where it has one, a rear release door lets the fox out without reaching through the front door. If a trap stays empty for days, move it to a fresh spot along the fence and reset the trigger.
Mind the local rules
Trapping rules differ by place, so check local, HOA and state rules before setting a trap, and check the rules on moving a caught fox. Some areas ask keepers to call animal control or a licensed trapper instead of relocating wildlife. If the rules are unclear, ask the state extension office before setting the trap out.
A simple trap-setting checklist
- Cage is sized for a fox, with room to step fully inside
- Trap sits on level ground beside the run fence or a fox trail
- Trigger plate trips on a light touch and the door closes freely
- Bait sits at the far end, past the trigger plate
- Gloves are ready for setting, carrying and release
- Local rules on trapping and relocation have been checked
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What size live trap do I need for a fox?
A fox needs a large live cage: a 42.5 in trap or a 37 in trap rated for animals under 55 lb both suit a fox, while a 16.3 in cage sized for squirrels does not.
How do I trap a fox with a foot trap?
This guide covers live cage traps only. A foot trap is a different tool with rules that vary by place, so check local and state rules before using one, and consider a live cage trap instead.
Where should I set a fox trap near a chicken coop?
Set it on level ground beside the run fence or near the gap where feathers or tracks show, with the open door facing the direction the fox comes from. Keep it out of the hens’ path, beside a fence or hedge where a fox feels safe to step in.
What should I do after catching a fox in a live trap?
Check the trap daily, wear gloves and use the rear door for release where the trap has one. Check local rules on moving a caught fox first, and call animal control or a licensed trapper if the rules ask for that.
Can I use a small squirrel trap for a fox?
No. A 16.3 in cage sized for squirrels and chipmunks is far too small for a fox, which needs a large live cage such as a 42.5 in or 37 in trap. A fox that cannot fit inside will not trip the door.
More coop guides
- Best Fox Traps (2026): 5 Live Traps for the Coop and Run
- Best Extra Large Fox Trap (2026): 5 Live Traps Compared
- How to Set Coyote Trap for Predator Protection
- What Size Trap for Coyote: A Guide for Predator Control
- How to Open an Animal Trap
See the best fox traps picks and the guide to setting a coyote trap for more predator protection.




