Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Pvc Coated vs Stainless Hardware Cloth: Which One Should You Buy?

Four stainless hardware cloth rolls compared by mesh size, gauge and roll size, with guidance on choosing between coated and stainless wire for a coop.

Pvc Coated vs Stainless Hardware Cloth: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TUOKS Black PVC Coated 1/4 Inch Hardware Cloth 48 x 100 ft 23TUOKS Black PVC Coated 1/4 Inch Hardware Cloth 48 x 100 ft 239.7/10View on Amazon
  2. 2GMOTLSE 304 Stainless Steel Hardware ClothGMOTLSE 304 Stainless Steel Hardware Cloth9.6/10View on Amazon
  3. 3Yardbliss Black Hardware Cloth 1/4 Inch 48 x 100 ft 22 GaugeYardbliss Black Hardware Cloth 1/4 Inch 48 x 100 ft 22 Gauge9.6/10View on Amazon
  4. 4Hardware Cloth 1/4 inch 23 Gauge Small Size 304 StainlessHardware Cloth 1/4 inch 23 Gauge Small Size 304 StainlessView on Amazon
  5. 5SS304 Stainless Steel 1/4 Hardware Cloth,Stainless Steel WireSS304 Stainless Steel 1/4 Hardware Cloth,Stainless Steel WireView on Amazon
  6. 6304 Stainless Steel Hardware Cloth 1/4 Inch 23 Gauge Chicken304 Stainless Steel Hardware Cloth 1/4 Inch 23 Gauge ChickenView on Amazon
  7. 723.5 inchesx10 feet Stainless Steel 1/4 Hardware23.5 inchesx10 feet Stainless Steel 1/4 HardwareView on Amazon
  8. 8304 Stainless Steel Hardware Cloth 1/2 20 GA 40in x 48ft Roll304 Stainless Steel Hardware Cloth 1/2 20 GA 40in x 48ft RollView on Amazon
  9. 9Black Hardware Cloth 1/4inx48inx100ftBlack Hardware Cloth 1/4inx48inx100ftView on Amazon

A run wall with a torn gap lets a small pest in overnight, and the wire over that gap decides whether the repair holds. That gap is where pvc coated vs stainless hardware cloth matters: one side adds a plastic coating over wire, the other side leaves the steel bare and relies on the alloy itself.

Other options for the coop

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

How to decide pvc coated vs stainless hardware cloth for a run

All four rolls in the gear section are 304 stainless steel, and each listing states corrosion resistance or rust resistance. A coated roll adds a plastic layer over the wire, while a stainless roll leaves the steel bare and relies on the alloy itself. This guide states the stainless specs in full and explains the coating choice beside them, so a keeper can weigh a coated roll from its own listing against the stainless figures below.

A keeper buying fresh wire for a run wall, a vent cover or a gap under the eaves can check every stainless claim below against a listing. For a coated roll, the same checks apply: mesh, gauge and coating claims from its own listing, set against the stainless figures below.

Mesh size: 1/4 inch against 1/2 inch

Three of the four rolls use 1/4 inch mesh, and one uses 1/2 inch mesh. The GMOTLSE roll, the Anbadum roll and the RXWJZP roll all state 1/4 inch openings, while the apgbwj roll states 1/2 inch openings. Fine mesh suits gaps under eaves, ventilation openings and small gaps around pipes or vents, which is where the GMOTLSE listing aims its roll. The RXWJZP listing names rabbits, squirrels and gophers among the pests its mesh helps reduce access by, and the apgbwj listing aims its wider mesh at garden fencing, rabbit enclosures and tree guards. For a coop run, the 1/4 inch rolls are the finer mesh in this set; the RXWJZP listing is the one that names rabbits, squirrels and gophers among the pests its mesh helps reduce access by. Our hardware cloth guide covers mesh choice in more detail.

Gauge and build

Two rolls state a gauge, and two do not. The GMOTLSE roll and the RXWJZP roll both state 23 gauge wire, while the apgbwj and Anbadum listings state no gauge figure. All four listings describe welded construction: the GMOTLSE roll states solid joints, the apgbwj roll states precision welding with reinforced weld joints, the Anbadum roll states each cross firmly welded, and the RXWJZP roll states precision welded wire. A stated gauge plus stated welded joints is the strongest build claim in this set, and it belongs to the two 23 gauge rolls. Where a listing states no gauge, the build claim rests on the welding words alone.

Roll sizes, weights and cutting

Roll size decides how many gaps one roll covers. The GMOTLSE roll measures 16 in x 33 ft, the apgbwj roll measures 15.7 in x 9.6 ft, the Anbadum roll measures 15.7 in x 10 ft, and the RXWJZP roll measures 7.5 in x 9.7 ft. Item weights run from 14.4 ounces on the RXWJZP roll to 4.4 pounds on the GMOTLSE roll, with the apgbwj and Anbadum rolls each at 1.5 pounds. Cutting tools are stated on three of the four rolls: the GMOTLSE listing states household scissors or standard tin snips, the Anbadum listing states normal scissors, and the RXWJZP listing states standard wire cutters or tin snips. The apgbwj listing states only appropriate cutting tools, with no specific tool named. The GMOTLSE listing adds one safety note the others do not: the cut edges may have slight sharpness, so gloves are advised when unpacking, cutting or setting up.

Roll Mesh Gauge Roll size Weight
GMOTLSE stainless roll 1/4 inch 23 gauge 16 in x 33 ft 4.4 pounds
RXWJZP stainless roll 1/4 inch 23 gauge 7.5 in x 9.7 ft 14.4 ounces
apgbwj stainless roll 1/2 inch Not stated 15.7 in x 9.6 ft 1.5 pounds
Anbadum stainless roll 1/4 inch Not stated 15.7 in x 10 ft 1.5 pounds

Figures as stated in each listing. The table leaves gauge as not stated where a listing gives no figure, rather than borrowing a figure from another roll.

The gear: four stainless rolls, ranked

The four rolls below are ranked by their stated specs: mesh fineness, a stated gauge, roll size and corrosion claims.

GMOTLSE 16 in x 33 ft stainless roll

The GMOTLSE roll pairs 1/4 inch mesh with 23 gauge wire and the longest roll in the set at 16 in x 33 ft, with an item weight of 4.4 pounds. Its listing states genuine 304 stainless steel with solid joints and strong tensile strength, and states the mesh stays rust resistant under moisture and outdoor elements. It also covers the widest list of uses here: gaps under eaves, ventilation openings, fireplace surrounds, window and door screens, and small gaps around pipes or vents. This is the roll for a keeper covering a long run wall or several openings from one purchase.

RXWJZP 7.5 in x 9.7 ft stainless roll

The RXWJZP roll matches the GMOTLSE roll on mesh and gauge at 1/4 inch and 23 gauge, in a smaller 7.5 in x 9.7 ft roll weighing 14.4 ounces. Its listing states quality 304 stainless steel with excellent corrosion resistance and durability for indoor and outdoor use, and names rabbits, squirrels and gophers among the pests its mesh helps reduce access by. It also states regular cleaning in coastal or high-salt environments, a note worth heeding near the sea. This is the roll for a small repair, a vent cover or a tree guard where a long roll would be wasteful.

apgbwj 15.7 in x 9.6 ft stainless roll

The apgbwj roll is the only 1/2 inch mesh roll here, at 15.7 in x 9.6 ft and 1.5 pounds. Its listing states 304 stainless steel with precision welding and reinforced weld joints, plus excellent corrosion resistance for indoor and outdoor environments, with the same coastal cleaning note as the RXWJZP roll. No gauge is stated, which is the gap in its listing. This is the roll for garden fencing, rabbit enclosures and tree guards where the wider mesh suits the job.

Anbadum 15.7 in x 10 ft stainless roll

The Anbadum roll states 1/4 inch mesh with a wire diameter of 0.53 mm, in a 15.7 in x 10 ft roll weighing 1.5 pounds. Its listing states high quality stainless steel that is corrosion resistant, with each cross firmly welded and an even, square mesh. No gauge is stated, and the listing is shorter than the others, with fewer stated uses. This is the roll for a keeper who wants 1/4 inch mesh in a mid-size roll and does not need the extra detail of the longer listings.

Coastal and wet runs

Wet weather and salty air are where stainless earns its keep. The GMOTLSE listing states its mesh stays rust resistant even when exposed to moisture or outdoor elements. The apgbwj and RXWJZP listings state excellent corrosion resistance and then add the same caution: regular cleaning and maintenance in coastal areas or other high-salt environments. For a run in a chicken run and fencing setup that faces rain for much of the year, the stated corrosion resistance is the claim that matters, and all four rolls state it.

Electric poultry netting safety

Use a charger rated for the length of netting you run, ground it as the manual describes and post warning signs where neighbors or children can reach the fence. Keep grass and weeds off the bottom strands, and never leave netting unpowered, because birds and wildlife can tangle in it. Read our Safety Disclaimer.

FAQ for the flock

Which mesh size is finer in this set?

The 1/4 inch rolls are the finer mesh, stated on the GMOTLSE, Anbadum and RXWJZP rolls. The GMOTLSE listing aims its fine mesh at gaps under eaves, ventilation openings and small gaps around pipes or vents. The RXWJZP listing names rabbits, squirrels and gophers among the pests its mesh helps reduce access by.

Does stainless hardware cloth rust?

The listings state rust resistance or corrosion resistance for all four rolls. The apgbwj and RXWJZP listings add that regular cleaning is recommended in coastal or high-salt environments.

What gauge should hardware cloth be?

Among the rolls featured here, 23 gauge is the stated figure, on the GMOTLSE and RXWJZP rolls. The apgbwj and Anbadum listings state no gauge, so no gauge claim can be made for those two.

Can I cut hardware cloth with household scissors?

The GMOTLSE listing states household scissors or standard tin snips, and the Anbadum listing states normal scissors. The RXWJZP listing states standard wire cutters or tin snips. The GMOTLSE listing advises gloves, since cut edges may have slight sharpness.

Is PVC-coated hardware cloth covered here?

This guide explains the coating choice and compares it with the four stainless rolls below. A keeper who wants a coated roll should check its own listing for mesh, gauge and coating claims before buying.

More coop guides

See every Predator Protection guide and all Coop Supplies guides. Also see the coated hardware cloth and PVC-coated hardware cloth guides.

More buying guides