Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hardware Cloth for Chicken Coop Runs and Aprons

Five rolls of 1/2 inch hardware cloth compared by gauge, coating, width and length, with how much a typical run needs and how to fix it so it stays put.

Best Hardware Cloth for Chicken Coop Runs and Aprons
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LAN JIA 36 in x 100 ft, 19 gaBest OverallLAN JIA 36 in x 100 ft, 19 ga9.7/10View on Amazon
  2. 2Zevemomo 48 in x 100 ft, 16 ga VinylHeaviest GaugeZevemomo 48 in x 100 ft, 16 ga Vinyl9.7/10View on Amazon
  3. 3GoldPeak 48 in x 50 ft, 19 gaBest 4 ft WidthGoldPeak 48 in x 50 ft, 19 ga9.7/10View on Amazon
  4. 4Metamesh 48 in x 100 ft, 19 gaBest Value for Big RunsMetamesh 48 in x 100 ft, 19 ga9.6/10View on Amazon
  5. 5Trenk 36 in x 50 ft, 19 gaBest for RepairsTrenk 36 in x 50 ft, 19 ga9.6/10View on Amazon

The best hardware cloth for chicken coop runs is 1/2 inch welded mesh in 19 gauge or heavier, galvanized well enough to last outdoors and in the ground. It is the single most effective predator upgrade you can make: raccoons reach through and tear chicken wire, but they cannot get through properly fixed hardware cloth. We compared five rolls by opening, gauge, coating, width and length.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Quick picks

  • Best Overall LAN JIA 36 in x 100 ft, 19 ga: Galvanized after welding with an eight-year guarantee Check price on Amazon
  • Heaviest Gauge Zevemomo 48 in x 100 ft, 16 ga Vinyl: 16 gauge with a vinyl coat over galvanized wire Check price on Amazon
  • Best 4 ft Width GoldPeak 48 in x 50 ft, 19 ga: Covers a run wall in one strip, galvanized after welding Check price on Amazon
  • Best Value for Big Runs Metamesh 48 in x 100 ft, 19 ga: 400 sq ft per roll Check price on Amazon
  • Best for Repairs Trenk 36 in x 50 ft, 19 ga: Light 150 sq ft roll for vents and gaps Check price on Amazon

Picks for the flock

LAN JIA 1/2 in Hardware Cloth, 36 in x 100 ft

LAN JIA 1/2 in Hardware Cloth, 36 in x 100 ft

LAN JIA9.7/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100 ft roll of 1/2 in, 19 gauge mesh galvanized again after welding, with the longest stated guarantee here, eight years.

Who it's for: building or retrofitting a run, including a buried apron, where you want the welds coated.

Who should skip it: anyone who wants 4 ft wide strips to cover run walls in one piece.

LAN JIA lists 1/2 in square openings in 19 gauge annealed steel wire, galvanized again after welding, on a 36 in by 100 ft roll weighing about 40 lb, or 300 sq ft of mesh. The listing says it can work underground for years and offers an eight-year quality guarantee.

Pros

  • Galvanized after welding, so the welds are coated too
  • 100 ft roll covers 300 sq ft
  • Stated eight-year quality guarantee
  • Suited to burying as an apron, per the listing

Cons

  • 36 in wide, short for a 4 ft run wall in one strip
  • 40 lb roll is heavy to handle
  • Cut edges are sharp
  • Guarantee terms are not detailed
Zevemomo 1/2 in Hardware Cloth, 48 in x 100 ft

Zevemomo 1/2 in Hardware Cloth, 48 in x 100 ft

Zevemomo9.7/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The heaviest wire here: 16 gauge, 1/2 in mesh with a black vinyl coat over galvanized wire, re-coated at the welds, on a 48 in by 100 ft roll.

Who it's for: runs where raccoons or dogs push hard on the mesh, and keepers who want a dark mesh that is easier to see through.

Who should skip it: anyone on a budget or doing small repairs.

Zevemomo's roll is 48 in by 100 ft, 400 sq ft, in 16 gauge wire with 1/2 in openings. The wire is galvanized and then vinyl coated, and the listing says the welds are coated again after welding. It weighs 52.9 lb and says it can be cut with scissors, though 16 gauge takes real effort.

Pros

  • 16 gauge, thicker than the usual 19
  • Black vinyl coat is easier to see through
  • Welds coated again after welding
  • 48 in x 100 ft covers 400 sq ft

Cons

  • Heaviest roll here at 52.9 lb
  • Thicker wire is harder to cut and bend
  • Vinyl can scuff where it rubs
  • No warranty term is stated
GoldPeak 1/2 in Hardware Cloth, 48 in x 50 ft

GoldPeak 1/2 in Hardware Cloth, 48 in x 50 ft

GOLDPEAK9.7/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 ft wide, 50 ft roll of 19 gauge, 1/2 in mesh galvanized after welding, checked five times and shipped in a reinforced carton.

Who it's for: covering the walls and vents of a small run or coop with 4 ft wide pieces.

Who should skip it: larger builds that need 100 ft.

GoldPeak lists 1/2 in, 19 gauge mesh, hot-dip galvanized after welding, on a 48 in by 50 ft roll, 200 sq ft, weighing 24.3 lb. It says each roll is checked five times for weak welds and missing wires and ships in a reinforced carton to protect the edges.

Pros

  • 4 ft width covers a run wall in one strip
  • Galvanized after welding
  • Five-step inspection for weak welds
  • Manageable 24.3 lb roll

Cons

  • 50 ft covers 200 sq ft, half the long rolls
  • No warranty term is stated
  • Sharp edges, as with all hardware cloth
  • 19 gauge, lighter than 16
Metamesh 1/2 in Hardware Cloth, 48 in x 100 ft

Metamesh 1/2 in Hardware Cloth, 48 in x 100 ft

Metamesh9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A long, wide 400 sq ft roll of 19 gauge, 1/2 in mesh made from wire galvanized before welding, for big runs on a budget.

Who it's for: a big above-ground run where you need a lot of mesh.

Who should skip it: buried aprons in wet soil, where after-weld galvanizing lasts longer.

Metamesh lists 48 in by 100.1 ft of 1/2 in, 19 gauge mesh, 400 sq ft at 46.5 lb. Its process description says the low carbon steel wire is galvanized and then welded, which leaves the weld points with less coating than mesh galvanized after welding. It says every roll is checked.

Pros

  • 48 in x 100 ft, 400 sq ft per roll
  • Good value for a large build
  • Uniform mesh and checked rolls, per the listing
  • 1/2 in openings in 19 gauge

Cons

  • Wire galvanized before welding, so welds are less protected
  • 46.5 lb and awkward to unroll alone
  • No warranty term is stated
  • Less suited to burying than after-weld coating
Trenk Galvanized Hardware Cloth, 1/2

Trenk Galvanized Hardware Cloth, 1/2

Trenk9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A smaller 150 sq ft roll of hot-dip galvanized 1/2 in, 19 gauge mesh that Trenk says has larger welds and more zinc than similar rolls.

Who it's for: covering vents, windows and gaps on an existing coop, or a small apron.

Who should skip it: anyone building a whole run.

Trenk lists hot-dip galvanized annealed steel wire, 1/2 in openings and 19 gauge on a 36 in by 50 ft roll, 150 sq ft, weighing 18.96 lb. It says it has increased the welding area by 10 percent and the zinc coating by 15 percent compared with similar products, and that rolls lie flat and are inspected for poor welds and missing wires.

Pros

  • Hot-dip galvanized annealed steel
  • Stated 10 percent larger welds and 15 percent more zinc
  • Lies flat when unrolled, per the listing
  • Light 18.96 lb roll for repairs and vents

Cons

  • 150 sq ft per roll
  • 36 in width
  • Zinc and weld claims are relative, not measured figures
  • No warranty term is stated

Other options for the coop

Specs at a glance

Model Keeper Score Opening Gauge Width x length Area Coating Weight Warranty
LAN JIA 9.7/10 1/2 in 19 36 in x 100 ft 300 sq ft Galvanized after welding 40 lb 8-year guarantee
Zevemomo 9.7/10 1/2 in 16 48 in x 100 ft 400 sq ft Galvanized plus vinyl 52.9 lb Not stated
GoldPeak 9.7/10 1/2 in 19 48 in x 50 ft 200 sq ft Galvanized after welding 24.3 lb Not stated
Metamesh 9.6/10 1/2 in 19 48 in x 100 ft 400 sq ft Galvanized before welding 46.5 lb Not stated
Trenk 9.6/10 1/2 in 19 36 in x 50 ft 150 sq ft Hot-dip galvanized 18.96 lb Not stated

We quote the brand’s rated specs from the product listings (as of 7 October 2026). Area is roll width times length.

Buying guide: best hardware cloth for chicken coop runs

Why not chicken wire

Chicken wire is a twisted hexagon of thin wire made to keep chickens in. Raccoons can reach through its 1 inch holes and pull birds against it, and dogs and foxes can tear it. Hardware cloth is welded into a rigid grid with small openings, so paws cannot get through and the mesh does not unravel.

Opening size and gauge

Use 1/2 inch openings for coops and runs; 1/4 inch is for rodents and brooders, and 1 inch lets small predators reach in. Gauge is wire thickness, and lower is thicker: 19 gauge is the common backyard choice, while 16 gauge, like the Zevemomo, is noticeably stiffer and harder to push in.

Galvanized before or after welding

Mesh galvanized after welding (GAW) has zinc over the welds as well as the wire, so it resists rust where it matters most. Mesh made from wire galvanized before welding (GBW), like the Metamesh, leaves the welds less protected. For buried aprons and wet sites, choose after-weld galvanizing or a vinyl coat.

How much you need

Measure the run walls, the roof if you cover it with mesh, and an apron. A 6 by 10 ft run with 4 ft walls has a 32 ft perimeter, so walls take 32 ft of 48 in mesh, about 128 sq ft. A 2 ft apron around the base adds another 64 sq ft, and a mesh roof another 60. That is about 250 sq ft, more than a 50 ft by 4 ft roll and less than a 100 ft one. The coop size calculator helps size the run first.

Roll Area Covers
36 in x 50 ft 150 sq ft Vents, windows and repairs
48 in x 50 ft 200 sq ft Walls of a small run
36 in x 100 ft 300 sq ft Walls plus apron for a small run
48 in x 100 ft 400 sq ft Walls, apron and roof of a mid-size run

Aprons against digging

Foxes, dogs and raccoons dig at the base. Either bury hardware cloth 12 inches down, or lay a 2 ft apron flat on the ground outward from the wall and pin it down; animals dig at the wall, hit the mesh and give up. Overlap and wire the seams.

Fixing it properly

Staples alone pull out. Use screws with washers or a strip of wood over the edge every 6 to 12 inches, and overlap pieces by at least one grid square. Wear gloves and eye protection: cut hardware cloth is sharp. Pair it with two-step latches and an automatic coop door so the coop is closed every night.

Chicken Coop Size Calculator

Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.

Open the calculator
Predator-proofing basics

Chicken wire keeps chickens in but does not keep raccoons, dogs or foxes out. Use 1/2 inch hardware cloth on openings, bury or apron it at the base, close the coop at dusk and use two-step latches that raccoons cannot open. Read our Safety Disclaimer.

FAQ for the flock

What size hardware cloth is best for a chicken coop?

1/2 inch openings in 19 gauge or heavier. That keeps out raccoon paws, snakes larger than the openings, and most rodents, while staying easy to cut and fix.

Is hardware cloth better than chicken wire?

For predators, yes. Chicken wire keeps chickens in but can be reached through and torn; welded hardware cloth cannot.

Should hardware cloth be buried?

Either bury it about 12 inches deep or lay a 2 ft apron flat on the ground outward from the run wall. Both stop animals that dig at the base.

How long does galvanized hardware cloth last?

It varies with soil, moisture and coating. Mesh galvanized after welding or vinyl coated generally holds up longer, especially underground.

Does a run roof need hardware cloth?

If raccoons, cats or climbing predators are around, yes. A solid roof keeps the run dry; a mesh roof stops climbers and hawks.

How the Coop Score came out

The Keeper Score weighs performance (opening, gauge and coverage), build (coating method and weld protection), value, safety (stated galvanizing or coating that keeps the barrier intact) and warranty. Only LAN JIA states a guarantee, which puts it ahead.

Product Keeper Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LAN JIA 36 in x 100 ft, 19 ga 9.7 32 24 21 7 3
Zevemomo 48 in x 100 ft, 16 ga Vinyl 9.7 33 22 20 7 0
GoldPeak 48 in x 50 ft, 19 ga 9.7 30 24 21 7 0
Metamesh 48 in x 100 ft, 19 ga 9.6 32 21 22 5 0
Trenk 36 in x 50 ft, 19 ga 9.6 29 24 20 7 0

A product’s weighted total becomes its score on a scale capped at 9.8 and floored at 9.2, in a straight line.

More coop guides

See every predator protection guide, the first-flock checklist and how big a chicken coop should be.

More buying guides