Staple Gun vs Hog Ring Pliers: Which One Should You Buy?
A pneumatic hog ring stapler's rings against two hand plier kits, compared on rings, speed and fit, plus who should skip each one.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
LonlyEagle Hog Ring Pliers Set9.5/10View on Amazon - 2
meite 15 Gauge Hog Ring Staples9.5/10View on Amazon - 3
Mr. Pen Hog Ring Pliers Kit9.4/10View on Amazon
Staple gun vs hog ring pliers verdict: Choose hog ring pliers for netting, cages and upholstery by hand: the Mr. Pen and LonlyEagle examples close rings with a squeeze and need no air supply. Choose the staple gun side, a pneumatic hog ring stapler, for high-volume work: the meite example is 10,000 galvanized 15 gauge 3/4 in rings built for factory production. For a backyard coop, pliers are the practical pick.
Attaching wire mesh to a coop frame comes down to two tools: a staple gun that drives fasteners with air, or hog ring pliers that crimp C-rings by hand. The staple gun vs hog ring pliers question is really about volume and setup: one is fast but needs a compressor, the other is slow but works anywhere. This comparison lines up the two sides on what each listing actually states.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
The three picks
| # | Product | Keeper Score | Buy |
|---|---|---|---|
| 1 | LonlyEagle Hog Ring Pliers Set | 9.5/10 | Buy on Amazon |
| 2 | meite 15 Gauge Hog Ring Staples | 9.5/10 | Buy on Amazon |
| 3 | Mr. Pen Hog Ring Pliers Kit | 9.4/10 | Buy on Amazon |

LonlyEagle Hog Ring Pliers Set
Bent hog ring pliers with 300 galvanized rings in 3/4, 1/2 and 3/8 in.
Who it's for: coop builders who want one kit with rings for cages, ropes and upholstery.
Who should skip it: anyone who needs a stated warranty or a spring-loaded jaw.
The LonlyEagle set is the top plier pick: bent hog ring pliers with rubber-coated handles plus 300 galvanized rings, 100 each of 3/4, 1/2 and 3/8 in. The rings crimp and close easily, and the listing says the jaws do not wear out after a large number of rings.
At 0.45 kg it is the heaviest of the three tools, which reads as solid rather than a drawback. No warranty term is stated, and the 3/8 in rings suit light work, not heavy mesh.
Pros
- 300 rings in 3 sizes, the most rings here
- Galvanized rings resist rust and oxidation
- Bent pliers with rubber-coated, anti-slip handles
- 0.45 kg, a solid hand tool
Cons
- No warranty term is stated
- 3/8 in rings are small for heavy mesh
- No spring loading is stated
- Single plier; no spare if it wears

meite 15 Gauge Hog Ring Staples
10,000 galvanized 15 gauge 3/4 in hog ring staples for pneumatic hog ring staplers.
Who it's for: high-volume users with a pneumatic hog ring stapler.
Who should skip it: anyone without the stapler; the plier kits are the hand alternative.
The meite is the volume pick: 10,000 galvanized 15 gauge hog ring staples with a 3/4 in crown, 15/16 in outside crown and 5.5-6.0 mm closure, made for mattress springs, seat assembly, wire cages and heavy upholstery. They fit the meite SC7C and SC7C-I2 and most 15 gauge 3/4 in pneumatic hog ring staplers.
This is a consumable, not a tool: it only makes sense if you already own the stapler. No warranty term is stated, and the single size limits it to work the 3/4 in crown suits.
Pros
- 10,000 rings, the most fasteners here by far
- 15 gauge with 3/4 in crown and 5.5-6.0 mm closure
- Galvanized for rust resistance
- Fits meite SC7C and most 15 gauge 3/4 in staplers
Cons
- Rings only; no tool included
- Needs a pneumatic hog ring stapler and air
- No warranty term is stated
- One ring size only

Mr. Pen Hog Ring Pliers Kit
Spring-loaded hog ring pliers with 110 steel hog rings and cushioned non-slip handles.
Who it's for: keepers who want a light, spring-loaded plier for small jobs.
Who should skip it: anyone who needs a stated ring size or a galvanized finish.
The Mr. Pen kit is the light hand option: spring-loaded pliers that keep the rings in the jaws for easy one-hand installation, cushioned non-slip handles, and 110 steel hog rings. The listing aims it at upholstery, netting, cages, bagging, traps and fencing.
The ring size is not stated, which is a gap against the other two. At 0.33 kg it is the lightest tool here, and 110 rings cover small jobs, not big runs.
Pros
- Spring-loaded jaws hold rings for one-hand work
- Cushioned non-slip handles
- 110 steel hog rings included
- 0.33 kg, the lightest tool here
Cons
- No warranty term is stated
- Ring size is not stated
- 110 rings are fewer than the LonlyEagle's 300
- No galvanized finish is stated
Other options for the coop
WORKPRO Hog Ring Pliers with 500 Pcs 3/4" Hog RingsCheck price on Amazon
WORKPRO Bent Hog Ring Pliers with 500 Pcs 3/4" Hog RingsCheck price on Amazon
Freeman 16-Gauge Hog Ring Pliers with FastenersCheck price on Amazon
Hog Ring Plier Fence Stapler with 2500 Pieces Stainless SteelCheck price on Amazon
Malco HRP5 9-Gauge Hog Ring PliersCheck price on Amazon
NEU MASTER Staple Gun with Staple RemoverCheck price on Amazon
staple gun vs hog ring pliers: side by side
| LonlyEagle Set | meite Staples | Mr. Pen Kit | |
|---|---|---|---|
| Side | Hog ring pliers | Staple gun | Hog ring pliers |
| Rings | 300, 3 sizes | 10,000, one size | 110, size not stated |
| Tool | Bent pliers | None (staples only) | Spring-loaded pliers |
| Finish | Galvanized | Galvanized | Not stated |
| Weight | 0.45 kg | Not stated | 0.33 kg |
These figures are the coop makers’ own ratings, read from each listing on 22 October 2026. None of the three listings states a warranty term.
What each one does
Hog ring pliers take a C-shaped ring in the jaws and crimp it closed around wire, mesh or fabric with one squeeze. The Mr. Pen example is spring-loaded so the rings stay in the jaws, and the LonlyEagle example has bent jaws with rubber-coated handles. The staple gun side is represented by the meite example: not a gun at all, but the consumable it feeds, 15 gauge 3/4 in hog ring staples for a pneumatic hog ring stapler like the meite SC7C.
Speed and volume
A pneumatic stapler drives a ring with every trigger pull, which is why the meite listing talks about factory production and sells 10,000 rings a box. Hand pliers do one ring per squeeze, which is fine for a run of mesh but slow for a whole barn. The listings do not state cycle rates, so treat speed as a category difference, not a measured one. For a coop, the plier kits include the rings: 110 with the Mr. Pen, 300 in three sizes with the LonlyEagle.
What the rings fit
The meite rings are 15 gauge with a 3/4 in crown and a 5.5-6.0 mm closure, made for thick or dense materials. The LonlyEagle kit covers 3/4, 1/2 and 3/8 in rings for cages, ropes and upholstery. The Mr. Pen listing does not state a ring size. Do not call a side better on fit unless both listings state it; here only two of the three do.
Choose hog ring pliers if
- You attach mesh or netting a few dozen rings at a time.
- You have no compressor and want a tool that works anywhere.
- You want rings included in the box, not a separate consumable.
- Hand work suits your pace: one squeeze, one ring.
Choose the staple gun side if
- You already own a 15 gauge 3/4 in pneumatic hog ring stapler.
- You fasten rings by the thousand, like upholstery or cage production.
- 10,000 rings a box matches your volume.
- Galvanized rust resistance matters for your climate.
FAQ for the flock
Can hog ring pliers attach chicken wire?
Yes. Crimping hog rings around wire and mesh is the core use the listings describe, for cages, netting and fencing. The LonlyEagle kit is aimed at animal cages directly.
Do I need a compressor for hog rings?
Only for the pneumatic stapler side: the meite rings feed a pneumatic hog ring stapler, which needs air. The plier kits work by hand with no power at all.
What size hog rings do I need?
It depends on the wire. The meite rings close at 5.5-6.0 mm; the LonlyEagle kit gives you 3/4, 1/2 and 3/8 in to try. Buy the size that wraps your mesh snugly.
Are galvanized rings worth it?
For outdoor coops, yes: the meite and LonlyEagle rings are galvanized for rust resistance. The Mr. Pen rings are steel with no finish stated, so they suit indoor or dry use better.
How many rings does a coop run take?
It depends on the mesh length and spacing. A few dozen rings covers a small run; the 300-ring LonlyEagle kit or the 10,000-ring meite box covers bigger jobs. Count your attachment points before buying.
How the Coop Score came out
The three picks are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.
| Product | Keeper Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| LonlyEagle Hog Ring Pliers Set | 9.5 | 29 | 20 | 21 | 0 | 0 |
| meite 15 Gauge Hog Ring Staples | 9.5 | 29 | 20 | 21 | 0 | 0 |
| Mr. Pen Hog Ring Pliers Kit | 9.4 | 27 | 19 | 20 | 0 | 0 |
Lower point totals read near 9.2 and the strongest near 9.8; because the conversion is proportional, rank by points equals rank by score.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
More coop guides
- Best Hog Ring Pliers for Beginners (2026)
- Electric Netting vs Poultry Netting: Which One Should You Buy?
- Poultry Netting vs Welded Wire: Which One Should You Buy?
- Best Poultry Netting for Free Range Chickens (2026)
See the chicken runs and fencing picks and the coop supply guides.




