Stock Tank vs Pond Liner: Which One Should You Buy?
A ready-made stock tank with add-on gear against a liner shaped into a dug pond, and how to pick the right base for a backyard duck pond.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
LifeGuard 15 x 20 EPDM Pond Liner9.7/10View on Amazon - 2
K&H Stock Tank DeicerView on Amazon - 3
Submersible Stock Tank Heater Fit for rubbermaid Stock TanksView on Amazon - 4
Rubbermaid Commercial Products BRUTE Stock TankView on Amazon - 5
Rubbermaid Commercial Products Stock Tank 300-GallonsView on Amazon - 6
Stock Tank ClarifierView on Amazon
When the ducks crowd the trough at first light and the water skins over with ice, the pond itself becomes the morning chore. This guide covers stock tank vs pond liner for a backyard duck pond, and every pick below fits a stock tank: no pond liner is featured here. A stock tank is the ready-made choice, a rigid container with add-on gear that holds the water level and keeps it open in winter, while a liner suits a pond dug and shaped by hand.
Other options for the coop
K&H Stock Tank DeicerCheck price on Amazon
Submersible Stock Tank Heater Fit for rubbermaid Stock TanksCheck price on Amazon
Rubbermaid Commercial Products BRUTE Stock TankCheck price on Amazon
Rubbermaid Commercial Products Stock Tank 300-GallonsCheck price on Amazon
Stock Tank ClarifierCheck price on Amazon
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
Stock tank vs pond liner: what each one is
A stock tank is a ready-made container in plastic, rubber or metal, and the three picks below all fit one. The K&H deicer is made for plastic, rubber and metal stock tanks, and the Little Giant float valve fits most plastic and metal stock tanks, troughs, barrels and pans. The Sxmprail heater fits Rubbermaid stock tanks in 50, 100, 150 and 300 gallon sizes. A pond liner is the other route: a sheet that lines a pond dug to shape, with no ready-made shell and no add-on gear in this guide. See the best pond liners guide for liner options.
The gear for a stock tank pond
The picks below appear in ranked order. The K&H deicer leads: a 750W thermostatically controlled heater that floats or sits submerged, with a protective cage and a cord clip, safety listed beyond UL requirements and a two year limited manufacturer warranty. The Sxmprail heater follows: a 1500W thermostatically controlled heater that fits Rubbermaid stock tanks, with a three year free replacement. The Little Giant float valve closes the set: a valve that automatically controls the water level and flows up to 245 gallons per hour.
The K&H deicer runs on 110/120 volt current, with its heating element fully submerged and free of mineral buildup. The Sxmprail heater needs a drain plug hole larger than 1.75 inches and starts heating below 41 degrees Fahrenheit, stopping when the ambient temperature reaches 95 degrees Fahrenheit. The Little Giant valve works between 20 and 50 psi and takes a standard 3/4 inch garden hose.
Setting up a stock tank pond
Set the tank where the ducks can reach it and the cord can reach a GFCI outlet. The Sxmprail heater installs at the bottom of the tank and fits within minutes, with two flexible silicone gaskets to seal it. The Little Giant valve takes a standard 3/4 inch garden hose and mounts with the expansion brackets in the box. The K&H deicer floats or sits submerged, and its cord clip holds the cord in place.
How to choose between a stock tank and a liner
Start with the shape of the pond you want. A stock tank gives a fixed shape and size, from the 50 gallon Rubbermaid tanks the Sxmprail heater fits up to the 300 gallon size, and the gear above attaches without digging. A liner gives a shape you dig yourself, and this guide has no liner pick to compare. Match the heater to the tank: the K&H deicer comes in 5 wattage options with a zone and wattage chart for tank size and climate zone, and the Sxmprail runs at 1500W. The K&H deicer turns on and off as needed to prevent freezing and help reduce energy use. Keep the water level steady with the Little Giant float valve, which flows up to 245 gallons per hour at 20 to 50 psi. For the pond itself, see the stock tank vs plastic duck pool comparison.
Winter water: deicers, cords and GFCI
Two of the three picks are deicers, and both are made for outdoor power: the K&H deicer is safety listed and comes with a cord clip, and the Sxmprail heater is built so the GFCI will not trip. The K&H heating element must stay fully submerged, and mineral buildup on the element can stop the heater or trip the GFCI. The Sxmprail heater hides its cord at the bottom of the tank, and it starts heating below 41 degrees Fahrenheit and stops when the ambient temperature reaches 95 degrees Fahrenheit, so it runs only when needed. Check local rules before running power to a pond, and see the pond de-icer vs duck pool heater guide for more on heaters.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
Which is better for ducks, a stock tank or a pond liner?
A stock tank is the ready-made choice: a rigid container with gear that holds the water level and keeps it open in winter. A liner suits a pond dug and shaped by hand, and this guide has no liner pick to compare.
What size stock tank fits these heaters?
The Sxmprail heater fits Rubbermaid stock tanks in 50, 100, 150 and 300 gallon sizes, and its drain plug hole must be larger than 1.75 inches. The K&H deicer comes in 5 wattage options with a zone and wattage chart for tank size and climate zone.
How does a float valve keep a stock tank full?
The Little Giant float valve automatically controls the water level. It flows up to 245 gallons per hour, works between 20 and 50 psi and takes a standard 3/4 inch garden hose.
Can a stock tank deicer run on a normal outlet?
The K&H deicer is designed for 110/120 volt current. Use a GFCI outlet for outdoor power, and keep the heating element fully submerged during use.
Do I need to activate the Sxmprail heater before use?
Yes. Place the unit in a freezer for 10 minutes or so before turning it on, so the internal thermostat activates. Otherwise it may be working but will not turn on.
Will the Sxmprail heater fit any stock tank?
It fits Rubbermaid stock tanks in 50, 100, 150 and 300 gallon sizes, and it also fits other agricultural stock tanks with a drain plug hole larger than 1.75 inches. Check the hole size before ordering.
More coop guides
- Best Pond Liners (2026): 5 Picks Compared
- Butyl vs EPDM Pond Liner: Which One Should You Buy?
- EPDM vs PVC Pond Liner: Which One Should You Buy?
- Pond De-icer vs Duck Pool Heater: Which One Should You Buy?
- Stock Tank vs Plastic Duck Pool (2026): Which for Ducks?
- Automatic vs Gravity Duck Waterer: Which One Should You Buy?
See the ducks, quail and turkeys guides and the feeders and waterers guides.




