Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Camera Mount Screw Size: Hardware Guide for Coop Cameras

The 1/4"-20 thread fits most coop cameras and cages, the 3/8"-16 thread fits heavy tripods and ball heads, and adapters bridge them.

Camera Mount Screw Size: Hardware Guide for Coop Cameras
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SMALLRIG 35-Piece Stainless Steel Camera Screw SetSMALLRIG 35-Piece Stainless Steel Camera Screw Set9.7/10View on Amazon
  2. 21/4"-20 Camera Screw Set1/4"-20 Camera Screw Set9.6/10View on Amazon
  3. 330-Pack Camera Tripod Screw Mount Kit30-Pack Camera Tripod Screw Mount Kit9.6/10View on Amazon
  4. 430-Pack Camera Tripod Screw Mount Kit 1/4 to 3/830-Pack Camera Tripod Screw Mount Kit 1/4 to 3/89.5/10View on Amazon

A loose camera at the coop can start with the wrong screw. The camera wobbles on its mount, the cage will not sit flat, or the ball head turns when a hen bumps the run fence. Camera mount screw size is the thread that joins the camera to its mount, and matching that thread is the whole job.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

SMALLRIG 35-Piece Stainless Steel Camera Screw Set

SMALLRIG 35-Piece Stainless Steel Camera Screw Set

SMALLRIG9.7/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 35-piece stainless steel set with five screw sizes, a compartmentalized storage box and a 2 year manufacturer warranty.

Who it's for: a keeper who mounts a camera, a cage and a monitor at the coop and wants every thread size in one box.

Who should skip it: anyone who only needs 3/8"-16 screws, since only 2 of the 35 are that size.

SMALLRIG packs 35 screws in five sizes: 9 slotted-head 1/4"-20 screws, 8 socket-head 1/4"-20 screws, 8 M2.5 screws, 8 M3 screws and 2 slotted-head 3/8"-16 screws. The listing states the 1/4"-20 screws fit cage bottoms, L-brackets, plates, handles, rod clamps and monitor cages, the M2.5 and M3 screws are for cage locking, and the 3/8"-16 screws fit heavy-duty tripods and ball heads. The screws are stainless steel, rust-resistant and made to stay tight, and they arrive in a transparent, compartmentalized storage box.

Pros

  • Five screw sizes in one set: 1/4"-20 slotted and socket heads, 3/8"-16, M2.5 and M3
  • Stainless steel, rust-resistant and built to stay tight
  • Compartmentalized storage box keeps each size separate
  • 2 year manufacturer warranty, the longest stated here

Cons

  • Only 2 of the 35 screws are 3/8"-16
  • M2.5 and M3 screws are for cage locking
  • Lengths are stated only for the M2.5 and M3 screws
  • No load limit is stated for any screw
1/4"-20 Camera Screw Set

1/4"-20 Camera Screw Set

VECO-T9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-pack of stainless steel 1/4"-20 screws for camera cages, tripods, monopods, quick release plates and projector mounts.

Who it's for: a keeper who needs spare 1/4"-20 screws for cages, tripods and monopods.

Who should skip it: anyone who needs a 3/8"-16 thread or M2.5 and M3 cage screws.

VECO-T packs 16 screws, 4 pieces per size across 4 types, and every one carries the 1/4"-20 thread. The listing calls the thread universal and names camera cages, tripods, monopods, light stands and quick release plates as fits, and the screws are stainless steel and rust-resistant. The listing claims 4 different standard sizes, but all 16 screws carry the 1/4"-20 thread.

Pros

  • 16 screws in one thread size, so spares match
  • Stainless steel, rust-resistant and solid
  • Universal 1/4"-20 male thread fits cages, tripods and monopods
  • 1 year warranty stated

Cons

  • All 16 screws are 1/4"-20, so no 3/8"-16 or cage screws
  • The listing claims 4 standard sizes but all share the 1/4"-20 thread
  • No storage case is stated
  • No screw length is stated
30-Pack Camera Tripod Screw Mount Kit

30-Pack Camera Tripod Screw Mount Kit

conglow9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-piece kit with 1/4" and 3/8" adapters, a mini ball head, a cold shoe mount and a phone clamp for cameras, tripods and lights.

Who it's for: a keeper who wants adapters, a ball head and a phone clamp in one kit for a coop camera and lights.

Who should skip it: anyone who needs a stated warranty or a stated weight before buying.

conglow bundles 30 pieces: 1/4 inch and 3/8 inch screw adapters, a mini ball head, a cold shoe mount, a phone holder clamp, double-ended screws, conversion nuts and camera mounting accessories. The listing states universal 1/4" to 3/8" compatibility with DSLR cameras, action cameras, tripods, monopods, ring lights, microphones, LED video lights, monitors, flashes and camera cages. The parts are aluminum alloy and stainless steel, the mini ball head supports 360° angle adjustment, and the kit is lightweight and portable.

Pros

  • 30 pieces cover adapters, a ball head, a cold shoe and a phone clamp
  • 1/4" to 3/8" adapters bridge the common threads
  • Mini ball head adjusts through 360°
  • Aluminum alloy and stainless steel for strength and corrosion resistance

Cons

  • No warranty term is stated
  • No weight is stated
  • No storage case is stated
  • No per-piece count is stated for the adapters and mounts
30-Pack Camera Tripod Screw Mount Kit 1/4 to 3/8

30-Pack Camera Tripod Screw Mount Kit 1/4 to 3/8

NeucomBBT9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-piece adapter kit with reducer bushings, spigots, swivel ball heads, a cold shoe adapter, a hot shoe mount and a phone clip.

Who it's for: a keeper who needs many adapter types for a trail camera and a ball head at the coop.

Who should skip it: anyone who wants a stated warranty or spares of every adapter type.

NeucomBBT lists 30 pieces: 10 reducer bushing screws, 3 male-to-male screws, 3 1/4" to 1/4" screws, 3 female-to-female spigots, 2 D-ring quick release screws, brass screws in each direction, a spigot stud, a cold shoe adapter, a hot shoe mount, a phone clip, a 17mm steel ball and 2 swivel ball heads. The listing states the kit fits DSLR cameras, ball heads, quick release plates, monitors, tripods, monopods, flash light stands, shoulder rigs and trail camera accessories. The warranty description reads 1 with no unit, so no usable warranty term is stated.

Pros

  • 10 reducer bushings plus spigots, studs and D-ring screws
  • 2 universal 1/4" swivel ball heads included
  • Cold shoe adapter, hot shoe mount and phone clip in the kit
  • Brass, aluminum alloy and stainless steel parts

Cons

  • Warranty reads 1 with no unit, so no usable term is stated
  • Most adapter types number 1 to 3 pieces
  • Ball heads are ABS plastic and cast iron, not all metal
  • No weight is stated

Camera mount screw size: the threads to know

Most coop cameras, cages and tripods use the 1/4″-20 thread, the small camera thread the listings call universal. The SMALLRIG set and the VECO-T set center on it, and the conglow and NeucomBBT kits bridge it to the larger 3/8″-16 thread. The 3/8″-16 thread is the larger mount thread, and the SMALLRIG listing puts it on heavy-duty tripods and ball heads. Check the thread on the camera and on the mount before buying, since a 1/4″-20 screw will not hold in a 3/8″-16 hole without an adapter.

What the M2.5 and M3 screws do

The small M2.5 and M3 screws in the SMALLRIG set are cage screws, not mount screws. The listing states the M2.5 and M3 screws are for cage locking, and the set carries 8 of each. They hold a cage together rather than joining the camera to a tripod, so they belong in the cage kit and not in the mount. If the cage uses them, keep spares in the box, since only 8 of each size come in the set.

Adapters that bridge the sizes

When the camera thread and the mount thread differ, an adapter bridges them. The conglow kit (on Amazon) includes 1/4 inch and 3/8 inch screw adapters with a mini ball head, a cold shoe mount and a phone clamp, and the NeucomBBT kit (on Amazon) lists 1/4″ to 3/8″ reducer bushings, male-to-male screws and female-to-female spigots. Each kit covers the common case of a 1/4″ camera on a 3/8″ mount, and the NeucomBBT kit lists brass screws in each direction. Match the adapter to the threads it joins, and keep the thread direction in mind: male-to-male joins female threads, and female-to-female joins male threads.

The gear for mounting a coop camera

The measurement step is matching the thread on the camera to the thread on the mount, and these kits cover the 1/4″-20 and 3/8″-16 threads, the M2.5 and M3 cage screws, and the adapters that bridge the sizes.

Chicken Coop Size Calculator

Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.

Open the calculator
Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

What size screw fits a trail camera at the coop?

Most trail cameras and cages use the 1/4″-20 thread, the same thread the SMALLRIG and VECO-T sets center on. Check the threaded hole on the camera and the mount before buying, and carry a 1/4″ to 3/8″ adapter from the conglow or NeucomBBT kit in case the mount uses the larger thread.

Can I mount a 1/4-inch camera on a 3/8-inch tripod?

Yes, with an adapter. The conglow kit and the NeucomBBT kit include 1/4″ to 3/8″ adapters, and the NeucomBBT kit lists reducer bushings and male-to-male screws. Match the adapter to the thread on the camera and the thread on the tripod.

What are M2.5 and M3 screws for on a camera cage?

The SMALLRIG listing states the M2.5 and M3 screws are for cage locking. They hold the cage together rather than joining the camera to a mount, and the set carries 8 of each size.

How do I keep track of so many small screws?

The SMALLRIG set comes in a transparent, compartmentalized storage box that keeps each screw size in its own compartment. Keep the box with the camera kit so the sizes stay sorted.

More coop guides

See the battery vs plug-in coop door comparison and the manual chicken coop door guide.

More buying guides