Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Should Fence Posts Be Set in Concrete? What to Use Instead

Concrete holds fence posts well, but foam post mixes set posts with no water and far less weight, so the right choice depends on the post and the soil.

Should Fence Posts Be Set in Concrete? What to Use Instead
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Postsaver Pro-Set Fast Fixing FoamPostsaver Pro-Set Fast Fixing Foam9.7/10View on Amazon
  2. 2Fast 2K Deck Post Mix Expanding Foam ConcreteFast 2K Deck Post Mix Expanding Foam Concrete9.6/10View on Amazon
  3. 3Postloc 1-Post Kit Concrete AlternativePostloc 1-Post Kit Concrete Alternative9.4/10View on Amazon
  4. 4Quikrete Concrete Mix Bag, 10 LbsQuikrete Concrete Mix Bag, 10 Lbs9.3/10View on Amazon

The run fence leans after a storm, the gate drags, and should fence posts be set in concrete is the question that decides how the posts go back in. The short answer is that concrete holds posts firm, but foam post mixes set posts with no water and far less weight to carry, and this guide compares the concrete and the foam mixes the listings state.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Postsaver Pro-Set Fast Fixing Foam

Postsaver Pro-Set Fast Fixing Foam

POSTSAVER9.7/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 33.8oz foam pack that sets 2 posts with no water, covering the concrete-free side of the fence post question.

Who it's for: keepers who want to set run fence posts with no water and no heavy bags to carry.

Who should skip it: buyers who need a stated warranty term or a pack for 1 post.

The listing states a 33.8oz large pack of post setting foam that installs 2 posts and replaces 80 to 100 lbs of concrete. It lists a rigid foam that is 97% lighter than concrete, with a shake of 60 seconds, pouring around the post in the hole, expansion starting in 3 to 5 minutes and full load strength in 90 minutes. The listing states no water is needed, posts set with it withstand high winds, and the maker notes 26 years of innovation. The listing contradicts itself on lateral strength, calling the foam both 100% laterally as strong as concrete post mix and stronger than it. No warranty term is stated.

Pros

  • One pack sets 2 posts with no water required
  • Replaces 80-100 lbs of concrete per the listing
  • 97% lighter than concrete as the maker states
  • Full load strength in 90 minutes stated

Cons

  • No warranty term is stated
  • Needs a fencing spade for the 2-post coverage
  • Expansion must be watched: cut excess away or backfill to prevent foam egress
  • No smaller pack size is stated
Fast 2K Deck Post Mix Expanding Foam Concrete

Fast 2K Deck Post Mix Expanding Foam Concrete

H.B. Fuller9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2.5 lb foam bag that sets posts in 15 minutes, covering the fast-setting side of the fence post question.

Who it's for: keepers who want a fast-setting foam for fence, deck or mailbox posts with rot protection.

Who should skip it: buyers who need a stated post count per bag or a warranty term in the listing.

The listing states a 2.5 lb bag of expanding foam that replaces 80 to 100 lbs of concrete, mixes in seconds in place and in the bag, and is ready to build in 15 minutes. It lists an expanding composite that the maker states is stronger than traditional concrete, adhesion to wood, vinyl and metal posts, and hydrophobic water protection that prevents water from getting into posts, reducing rot, rust and deterioration. The maker states it is the same technology used to set utility poles. The spec table lists the warranty as Warranty with no term, and no post count per bag is stated.

Pros

  • Ready to build in 15 minutes stated
  • Replaces 80-100 lbs of concrete per the listing
  • Hydrophobic water protection stated to prevent rot and rust
  • Adheres to wood, vinyl and metal posts stated

Cons

  • Warranty is listed as Warranty with no term stated
  • No post count per bag is stated
  • Stronger than traditional concrete is a maker claim
  • No expanded volume per bag is stated
Postloc 1-Post Kit Concrete Alternative

Postloc 1-Post Kit Concrete Alternative

Postloc9.4/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1-post kit that sets a post with no tools, covering the simplest side of the fence post question.

Who it's for: keepers who want the simplest kit for one post with no tools.

Who should skip it: buyers who need a stated set time, weight or warranty term before choosing.

The listing states a 1-post kit and a concrete alternative that works with all post types, needs no tools, sets fast and protects posts from rot and rust. The spec table lists 11.0 by 8.75 by 8.75 inches. No weight, no set time and no warranty term are stated.

Pros

  • Works with all post types stated
  • No tools required stated
  • Fast setting stated
  • Protects posts from rot and rust stated

Cons

  • No weight is stated
  • No set time is stated
  • No warranty term is stated
  • No post count beyond 1 post is stated
Quikrete Concrete Mix Bag, 10 Lbs

Quikrete Concrete Mix Bag, 10 Lbs

Quikrete9.3/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 lb bag of concrete mix, covering the concrete side of the fence post question.

Who it's for: keepers who want real concrete mix for a post that needs concrete.

Who should skip it: buyers who want a stated set time, a warranty term or a lighter bag to carry.

The listing states a Quikrete concrete mix bag of 10 lbs, with a small size and a 27.0 by 8.0 by 9.0 inch bag. The spec table lists an item weight of 0.5 pounds, which conflicts with the 10 lb title, and the title governs here. No set time, no warranty term and no post count per bag are stated.

Pros

  • 10 lb bag of concrete mix stated
  • Small size stated in the spec table
  • 27.0 by 8.0 by 9.0 inch dimensions stated
  • Gray color stated in the spec table

Cons

  • No set time is stated
  • No warranty term is stated
  • No post count per bag is stated

Should fence posts be set in concrete?

Concrete holds a post firm, and the Quikrete listing in this guide is a 10 lb bag of concrete mix for the job. Foam mixes do the same job without water: the Postsaver listing states its foam replaces 80 to 100 lbs of concrete, is 97% lighter than concrete and exceeds concrete post mix in lateral strength, while the Fast 2K listing states its foam replaces 80 to 100 lbs of concrete and is stronger than traditional concrete. The choice turns on the post and the soil: a foam mix suits a run fence post that needs setting with no water and no heavy bags, while concrete suits a post where the keeper wants the familiar mix. See standard fence post size for the post sizes that go with these mixes.

Concrete or foam: what the listings state

The concrete in this guide is the Quikrete 10 lb bag, with a small size and a 27.0 by 8.0 by 9.0 inch bag. The foam side has listings from Postsaver, Fast 2K and Postloc: the Postsaver 33.8oz pack sets 2 posts, the Fast 2K 2.5 lb bag is ready to build in 15 minutes, and the Postloc 1-post kit (on Amazon) needs no tools. Foam weighs far less per post: the Postsaver pack weighs 2.1125 pounds against the 80 to 100 lbs of concrete it replaces, and the Fast 2K bag weighs 2.5 pounds. Concrete needs water and mixing; foam needs no water, and the Postsaver listing states no water and no mess.

How to set a post with foam

With the Postsaver foam, shake the bag, pour the foam around the post and let it expand: the listing states a shake of 60 seconds, then pouring around the post in the hole, with expansion starting in 3 to 5 minutes and full load strength in 90 minutes. Cut away excess foam or backfill during expansion to prevent foam egress. The Fast 2K listing states mixing in seconds in place and in the bag, with the post ready to build in 15 minutes. Postsaver and Fast 2K need no water, and the Postloc kit needs no tools at all. Check local, HOA and state rules before digging, and call before you dig where lines may run.

Post mixes for the run fence

The mixes below cover the measurements that set a post: pack size, posts per pack, setting time and the concrete the foam mixes replace.

Chicken Coop Size Calculator

Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.

Open the calculator
Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

Do fence posts need concrete?

Not always. The listings in this guide offer foam mixes as a concrete alternative: the Postsaver foam replaces 80 to 100 lbs of concrete, the Fast 2K foam replaces 80 to 100 lbs of concrete, and the Postloc kit sets a post with no tools. Concrete still works, and the Quikrete 10 lb bag covers the concrete side, so the choice turns on the post, the soil and how much weight the keeper wants to carry.

Do metal fence posts need concrete?

The listings state foam for metal posts: the Fast 2K foam adheres to wood, vinyl and metal posts, and the Postloc kit works with all post types. A metal post can set in foam or in concrete, so match the mix to the post type and the soil.

How long does post foam take to set?

The Postsaver foam starts to expand in 3 to 5 minutes and reaches full load strength in 90 minutes. The Fast 2K foam is ready to build in 15 minutes, and the Postloc kit is listed as fast setting with no time stated.

How many posts does one foam pack set?

The Postsaver large pack sets 2 posts, and the Postloc kit sets 1 post. The Fast 2K listing states no post count per bag, and the Quikrete listing states no post count per bag either.

Does foam protect posts from rot?

The Fast 2K foam is hydrophobic and the maker states it prevents water from getting into posts, reducing rot, rust and deterioration. The Postloc kit states it protects posts from rot and rust. Concrete absorbs water, as the Fast 2K listing notes, so foam that states rot protection has the edge where rot is the worry.

More coop guides

See the chicken runs and fencing guides and the coop supply guides.

More buying guides

Chicken Runs and Fencing ·

Concrete Fence Post Types: Sizes and Uses

Steel saddle brackets and vinyl post towers for concrete fence posts, with the sizes, hardware and load figures that decide which type fits a…

Chicken Runs and Fencing ·

How to Secure Fence Post Without Concrete

Drive a ground spike anchor into firm soil, seat the post, and tighten the hardware for a fence post that holds without a concrete…

Chicken Runs and Fencing ·

How to Set Corner Post for Fence

Mark the corner, dig the hole, brace the post plumb and hang the gate on the post, with a corner brace kit keeping the…