Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Concrete Fence Post Types: Sizes and Uses

Steel saddle brackets and vinyl post towers for concrete fence posts, with the sizes, hardware and load figures that decide which type fits a run fence.

Concrete Fence Post Types: Sizes and Uses
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Fast 2K Deck Post Mix Expanding Foam Concrete AlternativeFast 2K Deck Post Mix Expanding Foam Concrete Alternative9.6/10View on Amazon
  2. 2VEVOR Fence Post Anchor Ground SpikeVEVOR Fence Post Anchor Ground Spike9.6/10View on Amazon
  3. 3XYADX 32 inch Fence Post Anchor Ground SpikeXYADX 32 inch Fence Post Anchor Ground Spike9.6/10View on Amazon

A run fence starts with posts that stay put through wind, rain and a flock leaning on the wire. Concrete fence post types come down to how the post meets the concrete: a steel saddle bracket set into wet concrete, or a steel mount tower bolted to a set slab. This guide walks through both types, with the sizes and hardware from the reference listings.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Concrete fence post types: steel saddle brackets

A saddle bracket is a U-shaped steel holder that grips the bottom of a wood post and sets into wet concrete. The wood post sits in the saddle, clear of the damp concrete below, and screws through pre-drilled holes lock it in place. The XYADX bracket (on Amazon) fits 3.5 x 3.5 in wood posts, is made of 14-gauge steel with a black powder coating finish, and measures 10.6 x 5.8 x 5.3 in, with 10 pre-drilled holes. It comes as a 4-pack, and wood posts and mounting screws are not included.

The Mayset bracket (on Amazon) is the same idea in stainless steel with a black powder coating, made to resist rust and corrosion. Its bottom carries an air flow channel and four L-shaped rebars, 3/8 in by 4.9 in, that grip the concrete. The set holds 4 post anchors, 24 hex screws, 1 drill bit and 1 hex socket tool, and it fits standard 4×4 wood posts, actually 3.5 x 3.5 in. The DIY DECK bracket (on Amazon) scales the same design up to 6×6 posts, fitting actual 5.5 x 5.5 in wood beams, with four rebars of 1/2 in at the bottom and an air flow channel. Its set holds 4 brackets, 32 hex screws, 1 drill bit and 1 hex socket tool.

Setting a saddle bracket follows the same steps across the saddle bracket listings: insert the anchors into the wet concrete before the concrete is set, let the concrete dry, insert the wooden post into the bracket, then drill the pre-drilled holes and lock the screws. Our guide on setting fence posts in concrete covers the choice in more detail, and our guide on how deep a fence post goes covers depth.

Vinyl post mount towers

A mount tower is a different type: a galvanized steel tower that stands on set concrete and holds a vinyl fence post. The Hicarer towers come in 2 lengths, 48 in and 36 in, with an actual size of 4 5/8 in by 4 5/8 in by 46.5 in for the 48 in tower and 4 5/8 in by 4 5/8 in by 36 in for the 36 in tower. Both carry a 300 pounds load capacity and fit end posts, corner posts or line posts. The Homestead tower fits 5×5 vinyl fence posts with a .150 wall or less, at an actual width of 4 5/8 in by 4 5/8 in by 46.5 in long, and comes with mounting hardware for a concrete or wood deck.

The hardware in the box differs by pack. The 48 in Hicarer tower pack holds 4 pieces of 3/8 in by 3 in concrete wedge anchors, 4 pieces of 3/8 in by 3 in hexagonal lag screws and 8 pieces of 3/8 in flat washers. The 36 in tower pack holds 8 wedge anchors, 8 lag screws and 16 flat washers, all 3/8 in by 3 in. The Homestead pack holds 4 concrete wedge anchors, 4 hex lag screws and 10 flat washers, all 3/8 in by 3 in, plus 4 screws with a white snap cap. A tower bolts down where a bracket sets in, so for a concrete base the choice depends on whether the concrete has already set. See our guide on using a post hole auger for the digging side of the job.

Sizes to match

Post sizes are nominal, and the actual size is what matters. A 4×4 bracket fits a 3.5 x 3.5 in wood post, and a 6×6 bracket fits a 5.5 x 5.5 in wood beam. The vinyl towers fit 5×5 vinyl fence posts, with the Homestead tower limited to a .150 wall or less. Lengths run 36 in and 48 in for the towers, with the 48 in tower measuring 46.5 in long in actual size. Check the actual size on the listing before ordering, since the nominal size and the actual size differ on every post type here. Our types of wood fence posts guide compares wood posts, and our wood vs steel fence posts comparison covers the material choice.

What holds the post: rebars, anchors and screws

Two kinds of grip hold these posts in concrete. Saddle brackets use rebars under the saddle: the Mayset bracket uses four L-shaped rebars at 3/8 in by 4.9 in, and the DIY DECK bracket uses four rebars at 1/2 in. The rebars sit in the wet concrete and anchor the bracket once it sets. Mount towers use wedge anchors and lag screws instead: 3/8 in by 3 in concrete wedge anchors and 3/8 in by 3 in hex lag screws, with 3/8 in flat washers under the heads. Screw counts vary by set, from 24 hex screws with the Mayset brackets to 32 hex screws with the DIY DECK brackets, and both sets include 1 drill bit and 1 hex socket tool. The XYADX brackets use 10 pre-drilled holes per bracket for the screws that lock the post.

Air flow and rot

Wood rots where it stays damp, and the brackets here are built around that. The Mayset and DIY DECK brackets both have an air flow channel at the bottom, so the bottom of the wood post stays ventilated and dry instead of sitting in moisture. The U-shape itself separates the wood from the damp concrete, which the XYADX listing states keeps the post more stable with a longer service life. Coatings add another layer: the XYADX bracket uses black powder coating on 14-gauge steel, the Mayset bracket uses black powder coating on stainless steel, and the towers use galvanized steel with a silver finish. Powder coating and galvanizing both guard against rust and corrosion outdoors.

A simple fence post checklist

  • Match the bracket or tower to the actual post size, 3.5 x 3.5 in, 5.5 x 5.5 in or 5×5 vinyl
  • Pick a saddle bracket for wet concrete or a mount tower for a set slab
  • Check the rebar size, 3/8 in or 1/2 in, and the wedge anchor size, 3/8 in by 3 in
  • Count the screws in the set, 24 or 32 hex screws, and check whether a drill bit is included
  • Confirm the load capacity, 300 pounds for the Hicarer vinyl post towers
  • Confirm the tower length, 36 in or 48 in, against the fence height
Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

What is a concrete fence post anchor?

A steel bracket or tower that joins a fence post to concrete. A saddle bracket sets into wet concrete and holds a wood post in a U-shaped saddle, while a mount tower bolts to a set slab and holds a vinyl post. Both types keep the post upright and off the damp concrete.

Do fence posts go in wet concrete or on a set slab?

It depends on the type. Saddle brackets go into wet concrete before it sets, with rebars under the saddle gripping the concrete as it sets. Mount towers bolt to concrete that has already set, using wedge anchors and lag screws; the Homestead tower can also bolt to a wood deck. Our guide on how long fence posts need to set covers setting time.

What size post fits a 4×4 anchor?

A 4×4 anchor fits a 3.5 x 3.5 in wood post, which is the actual size of a nominal 4×4. A 6×6 anchor fits a 5.5 x 5.5 in wood beam. Vinyl towers fit 5×5 vinyl fence posts, with the Homestead tower limited to a .150 wall or less.

How much weight can a vinyl fence post tower hold?

The Hicarer towers in the reference listings carry a 300 pounds load capacity, in both the 48 in and the 36 in lengths. The capacity covers the fence post and the fence it carries, so check the listing for the tower you buy.

Do post brackets keep wood from rotting?

They help by keeping the wood dry. The Mayset and DIY DECK brackets here use an air flow channel so the bottom of the wood post stays ventilated, and the U-shape separates the wood from the damp concrete. The listings describe the channel as keeping the post bottom dry and preventing rot from prolonged moisture.

More coop guides

See the chicken runs and fencing guides and the chicken run set up guide.

More buying guides

Chicken Runs and Fencing ·

How to Secure Fence Post Without Concrete

Drive a ground spike anchor into firm soil, seat the post, and tighten the hardware for a fence post that holds without a concrete…

Chicken Runs and Fencing ·

Types of Wood Fence Posts Compared

Pressure-treated pine, a steel repair kit and a re-treatment kit compared for chicken run fence posts.

Chicken Runs and Fencing ·

Types of Fence Posts: Materials Compared

Wood, steel U-channel, steel T-posts and vinyl compared for a chicken run, with heights, packs and no-dig setup from the listings.