How to Set Corner Post for Fence
Mark the corner, dig the hole, brace the post plumb and hang the gate on the post, with a corner brace kit keeping the frame square, so the fence line stays square.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Aunulahca Anti-Sag Fence Gate Kit, 2 Set9.6/10View on Amazon - 2
WEKIS Gate Corner Brace Brackets Anti-Sag Gate Kit9.5/10View on Amazon - 3
TANIVO Gate Corner Brace Kit9.5/10View on Amazon
A run fence that sags at the corner lets chickens wander and lets trouble in, and the corner post carries that strain every day. How to set corner post for fence work starts with the corner itself: mark it, dig for it, brace it and hang the gate on it so the whole fence line stays square.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
| # | Product | Keeper Score | Buy |
|---|---|---|---|
| 1 | Aunulahca Anti-Sag Fence Gate Kit, 2 Set | 9.6/10 | Buy on Amazon |
| 2 | WEKIS Gate Corner Brace Brackets Anti-Sag Gate Kit | 9.5/10 | Buy on Amazon |
| 3 | TANIVO Gate Corner Brace Kit | 9.5/10 | Buy on Amazon |

Aunulahca Anti-Sag Fence Gate Kit, 2 Set
A 2-set kit rated for a safe loading of 200 lbs, with corner braces, hinges and latches that keep a wooden gate frame square so the corner post carries a gate that does not sag.
Who it's for: a keeper hanging two wooden gates who wants the highest stated safe loading here.
Who should skip it: anyone with a single gate or a metal gate frame.
Aunulahca lists this 2-set kit at 9.7 x 9.7 x 1.2 in, with 4 hinge brackets, 8 corner brackets, 2 gate latches, 2 bars, 2 pull rings with wire and 1 door hinge. The maker rates it for a safe loading of 200 lbs on wood 2 x 4 and above, and the kit allows a 180 degree swing to the left or right. The maker also claims 3x greater impact resistance than ordinary iron tools.
Pros
- Safe loading of 200 lbs, the highest here
- 2-set kit covers two gates, a gate and a shed door
- Corner braces, hinge brackets, latches, bars and pull rings all in the box
- Suits wood 2 x 4 and above with a 180 degree swing
Cons
- No warranty term is stated
- The 2-set pack suits two gates, so a keeper with one gate pays for a spare set
- Wood, posts and tools are not in the box
- Built for wooden gates only, so it does not suit a metal gate frame

WEKIS Gate Corner Brace Brackets Anti-Sag Gate Kit
A single-door kit rated for a safe loading of 120 lbs, with corner braces and a latch that keep a wooden gate frame square so the corner post carries a gate that does not sag.
Who it's for: a keeper hanging one wooden gate who wants every screw in the box.
Who should skip it: anyone hanging two gates or a gate heavier than the stated safe loading.
WEKIS lists this single-door kit at 8.5 x 1.2 x 9.7 in, with 2 hinge brackets, 4 corner brackets, 1 latch, 1 bar and 1 pull ring with wire. The maker rates it for a safe loading of 120 lbs on wood 2 x 4 and above, and the triangular structure holds the gate at 90 degrees so it does not sag or twist. The kit allows a 180 degree swing to the left or right.
Pros
- Safe loading of 120 lbs for a wooden gate
- 20 short screws, 20 long screws and 6 latch screws all in the box
- Triangular 90 degree structure keeps the gate from sagging or twisting
- Suits wood 2 x 4 and above with a 180 degree swing
Cons
- Single Door Set covers one gate only
- Safe loading of 120 lbs is lower than the 200 lbs of the Aunulahca kit
- No warranty term is stated
- Built for wooden gates only, so it does not suit a metal gate frame

TANIVO Gate Corner Brace Kit
A 2-set kit for two wooden gate frames, with reinforced corner braces and integrated hinges that keep each frame square so the corner post carries gates that do not sag.
Who it's for: a keeper building two wooden gate frames who wants hinges built into the corner brackets.
Who should skip it: anyone who needs a stated safe loading or a single-gate kit.
TANIVO lists this kit at 12.0 x 7.6 x 1.6 in, with 8 reinforced corner braces, 4 brackets with integrated hinges and mounting hardware for two wooden gate frames. The corner braces use diagonal metal supports to strengthen the joints between horizontal and vertical boards, and the pre-drilled holes simplify alignment. The maker gives two latch counts, 1 and 2; check before ordering.
Pros
- Hardware for two gate frames in one kit
- 4 brackets with integrated hinges simplify the frame
- Reinforced 90-degree corners keep frames square and stable
- Pre-drilled holes simplify bracket alignment and screw placement
Cons
- No safe loading is stated, so the gate weight it carries is unclear
- Wood, posts and tools are not in the box
- Built for two gate frames, so a keeper with one gate has a spare set
- No weight is stated for the kit
How to set corner post for fence: mark the corner first
Walk the fence line and look along it before you dig anything. The corner is where the two sides of the run meet, and the pull of the fence wire from both sides lands there, so a corner post that starts out of line stays out of line. Mark the spot with a stake and run a string along each side so you can see whether the corner sits true. If the ground falls away on one side, shift the mark until the corner sits where the fence can run straight in both directions. Our how many fence posts guide helps you space the line posts once the corner is set.
Choose a post that suits the fence you are building. A wood post suits a wood fence and a wire fence alike, and a corner post should be stouter than the line posts around it because it takes the pull from two directions. See T post vs wood post if you are weighing the two kinds. Set the post aside and gather the brace hardware, the gate kit and the tools before the hole is open, so the post does not sit in a hole while you hunt for parts.
Dig the hole for the corner post
Dig the hole wider than the post so you have room to work the backfill around it, and deep enough that the post stands firm when the gate hangs on it. Keep the sides of the hole straight and the bottom flat, and pile the soil beside the hole where you can reach it for backfill. If you strike a root or a stone, clear it rather than forcing the post past it, because a post that leans on a buried stone can stay leaning. Our how deep post for fence guide covers the depth that keeps run posts straight.
Stand the post in the hole and check it from two sides before any soil goes back. A post that looks straight from the fence line can still lean along it, so sight along each side in turn. Brace the post with diagonal supports from the ground to the post while you work, and leave the braces in place until the backfill is firm.
Set the post plumb and brace it
Plumb means the post stands straight up, with no lean in any direction. Hold a level against the post on two faces and shift the post until the bubble sits true on both. Pack a little soil at the base to hold the post while you check it again, and do not rush this step: a corner post that leans will pull the gate with it. If the post keeps moving, add a diagonal brace from the post to a stake in the ground and tighten it until the post holds still.
Backfill and let the post settle
Fill the hole a layer at a time and tamp each layer firm before the next goes in. Loose backfill settles under the post and leaves it wobbling, so take the time to pack it well all round. Keep checking the post as you fill, because backfill can push a post out of plumb while you work. Once the hole is full, mound the soil a touch higher than the ground around it so rain runs away from the post. See should fence posts be set in concrete if you are weighing concrete against a soil backfill.
Hang the gate on the corner post
A gate hangs on the corner post, so the post must be firm before the gate goes on. The corner brace kits below keep the gate frame square, so the frame does not rack and the gate hangs true on the corner post. Fit the hinges to the post first, then lift the gate onto them and check that it swings clear of the ground and shuts against the latch. A gate that drags can pull the post out of plumb over time, so adjust the hinges until the swing is smooth and the latch meets cleanly.
The gear that holds the corner
The corner post does the heavy work, and the gate hardware below keeps the gate frame square so the post is not pulled out of plumb by a sagging gate.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What does a corner brace kit do for a gate?
A corner brace kit reinforces the corners of the gate frame so the frame stays square. The WEKIS and TANIVO kits brace each corner at 90 degrees, and their makers state this keeps the gate from sagging or twisting. A square gate hangs true on the corner post instead of dragging and pulling the post out of plumb.
What size wood do the gate kits fit?
The WEKIS and Aunulahca kits suit wood 2 x 4 and above, and the TANIVO kit works with boards cut to the size the opening needs. Check the kit against the boards you plan to use before you order.
How much weight can a gate kit carry?
The Aunulahca kit (on Amazon) is rated for a safe loading of 200 lbs, and the WEKIS kit (on Amazon) for a safe loading of 120 lbs. The TANIVO kit states no safe loading, so the gate weight it carries is not stated.
Can a gate swing both ways?
The WEKIS and Aunulahca kits allow a 180 degree swing to the left or right, so the gate can open inward or outward. The TANIVO kit names latches for inward or outward swinging gates.
Do the kits include a latch?
The WEKIS kit includes 1 latch, and the Aunulahca kit includes 2 gate latches. The TANIVO kit names 1 latch in its title and 2 latches in its description, so check the count before ordering.
More coop guides
- How Deep Post for Fence: Setting Run Posts That Stay Straight
- How Many Fence Post Do I Need for the Run
- Chain Link Fence Post Size: Terminal, Line and Rail Sizes
- Should Fence Posts Be Set in Concrete? What to Use Instead
- T Post vs Wood Post: Which One Should You Buy?
- Best Steel T Post Driver (2026): 5 Picks for Fence Lines
- Best Metal T Post Puller (2026): 5 Fence Line Picks
- Manual T Post Puller: How to Choose One for Your Run Fence
- Best Ground Anchors for Hard Soil (2026): 5 Picks That Bite
- Wood vs Steel Fence Posts: Which One Should You Buy?
See the chicken run set up guide and the chicken run picks for the rest of the run.




