Temperature Controller With Timer for Incubators and Brooders
A temperature controller with a timer holds heat steady for incubators and brooders, switching heat on and off by temperature and by the clock.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
DEWENWILS Temperature Controller Outlet9.7/10View on Amazon - 2
Kasco C-20 De-icer Time and Temperature9.5/10View on Amazon - 3
GECXGY Temperature Controller Timer Thermostat9.5/10View on Amazon - 4
GECXGY Temperature Controller Timer Thermostat9.4/10View on Amazon
Chicks peep in the brooder while the heat lamp hums, and the keeper checks the thermometer on the way out to the run. A temperature controller with timer takes that job over: it switches the heat on and off by temperature and by the clock, so the incubator or brooder holds steady without constant watching. This guide explains the timer modes, what to check before buying, and which controller fits each job.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

DEWENWILS Temperature Controller Outlet
A 15A plug-in controller with a range of -40 to 210°F, 0.1°F precision, heating and cooling modes and timer modes.
Who it's for: keepers who want a plug-in controller with a timer for an incubator, brooder or greenhouse.
Who should skip it: anyone who wants a controller made only for a pond de-icer.
DEWENWILS lists a 15A plug-in thermostat with up to 1800W of heating capacity, a range of -40 to 210°F and a precision of 0.1°F. It runs heating and cooling modes, shows readings on a VA display that stays clear in dim light, and offers cyclic timing and countdown modes. Power memory restores previous settings, and it measures 4.14 by 2.26 by 1.53 inches and carries a 1 year manufacturer warranty.
Pros
- Range of -40 to 210°F with 0.1°F precision
- Heating and cooling modes in one plug
- Cyclic timing and countdown modes
- Power memory restores previous settings
Cons
- One outlet controls one heater or cooler
- Needs an outlet near the incubator or brooder
- Needs clear space at the outlet at 4.14 by 2.26 by 1.53 inches
- Range far wider than an incubator needs

Kasco C-20 De-icer Time and Temperature
A thermostat and timer combo for 120V de-icers, factory-set at 30°F and adjustable from 0 to 80°F, with an 8-foot power cord.
Who it's for: keepers who run a pond de-icer and want it on only at set temperatures and times.
Who should skip it: anyone who wants a controller for an incubator or brooder.
Kasco lists the C-20 as a thermostat and timer combo for 120V de-icers and water circulators. It comes factory-set at 30°F, starts the de-icer and keeps it running until the air warms to 31°F or higher, and adjusts from 0 to 80°F. The time controller sets the time of day for operation. It has an impact-resistant enclosure, a transparent lid over the rotary button and an 8-foot power cord, and it measures 6.0 by 9.0 by 12.0 inches and weighs 3.0 pounds.
Pros
- Thermostat and timer in one control box
- Factory-set at 30°F and adjustable from 0 to 80°F
- UL-listed design is claimed, with a waterproof enclosure
- 8-foot power cord and impact-resistant enclosure
Cons
- Made for 120V de-icers and water circulators, not for incubators
- Needs wall or shelf space at 6.0 by 9.0 by 12.0 inches and 3.0 pounds
- Controls one 120 volt de-icer
- No warranty term is stated

GECXGY Temperature Controller Timer Thermostat
A 15A plug-in controller with a range of -40 to 210°F, cyclic timing, countdown and dimming modes, and a VA display.
Who it's for: keepers who want a plug-in timer controller for heat mats, heat lamps and brooders.
Who should skip it: anyone who wants a stated warranty or a controller made for pond de-icers.
GECXGY lists a 15A plug-in thermostat with up to 1800W, a range of -40 to 210°F and a VA display that reads clear in low light. It runs cyclic timing, countdown and dimming modes, and it supports Fahrenheit and Celsius units. The maker lists heat mats, ceramic heaters and greenhouses among the uses, and the 15A circuit layout prevents overload during long-term use.
Pros
- Range of -40 to 210°F with heating and cooling
- Cyclic timing, countdown and dimming modes
- VA display reads clear in low light
- 15A circuit layout prevents overload
Cons
- One outlet controls one heater or cooler
- Needs an outlet near the incubator or brooder
- Dimming modes suit heat lamps more than incubator heaters
- No warranty term is stated

GECXGY Temperature Controller Timer Thermostat
A 15A plug-in controller with a range of -40 to 210°F, cyclic timing, countdown and dimming modes, and a probe cable backup kit.
Who it's for: keepers who want a timer controller with spare probe cables for a large grow tent or brooder setup.
Who should skip it: anyone who wants a stated warranty or a controller made for pond de-icers.
GECXGY lists a 15A plug-in thermostat with up to 1800W, a range of -40 to 210°F and a VA display that reads clear in low light. It runs cyclic timing, countdown and dimming modes, and it supports Fahrenheit and Celsius units. The probe cable backup kit comes with 2m and 5m sensor extensions for damage replacement or longer reach. It measures 2.0 by 2.0 by 2.5 inches and comes in white.
Pros
- Range of -40 to 210°F with heating and cooling
- Cyclic timing, countdown and dimming modes
- VA display with Fahrenheit and Celsius units
- Probe cable backup kit with 2m and 5m sensor extensions
Cons
- One outlet controls one heater or cooler
- Needs an outlet near the incubator or brooder
- Dimming modes suit heat lamps more than incubator heaters
- Probe extensions add cable to manage around the brooder
How a temperature controller with timer works
A temperature controller with timer is a plug-in switch with a sensor. The sensor reads the temperature, and the controller switches the heater on below the set point and off above it. The timer adds a schedule: cyclic timing repeats an on and off pattern, and countdown modes switch the outlet on or off after a set time. Heating and cooling modes on the DEWENWILS let one plug run a heater or a fan, and the Kasco C-20 (on Amazon) pairs a thermostat with a time clock, so a de-icer runs only at a set temperature and time of day.
Match the range and the load
Three cover -40 to 210°F, and the Kasco C-20 covers 0 to 80°F with a factory setting of 30°F. The wide range covers incubator and brooder heat, while the Kasco C-20 covers 0 to 80°F for a de-icer. The DEWENWILS and GECXGY controllers are rated at 15A and 1800W, and the Kasco C-20 runs on 120V, so check the heater or de-icer against the rating before you plug it in. For brooder heat settings, see chick brooder temperature, and for incubator settings see chicken egg incubator temperature and humidity.
Timer modes: cyclic timing and countdown
Cyclic timing repeats a schedule, so a heat mat or lamp can follow a day and night pattern. Countdown modes switch the outlet on or off after a set time, which suits a timed run of heat. The DEWENWILS controller (on Amazon) lists cyclic timing, countdown on, countdown off and countdown on/off modes, and both GECXGY controllers list cyclic timing, countdown and dimming. The Kasco C-20 sets the time of day for operation, so the de-icer runs at set hours.
Where to put the probe and the plug
Plug the controller into a GFCI outlet outdoors and keep cords off the ground. The GECXGY white controller comes with 2m and 5m sensor extensions, so the probe reaches further in a large grow tent. The Kasco C-20 comes with an 8-foot power cord and an impact-resistant enclosure with a transparent lid over the rotary button. The DEWENWILS controller restores previous settings with power memory, and temperature calibration fine-tunes deviations.
The gear: four controllers for incubators and brooders
The step that needs gear is the switching itself: each controller below reads the temperature and runs the timer on the heater plugged into it.
Run the incubator for a day before you set eggs to confirm temperature and humidity, keep it away from direct sun and drafts, and plug it into a protected outlet. Plan the brooder before hatch day. Wash your hands after handling eggs and chicks. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What does a temperature controller with timer do?
It switches a heater or cooler on and off by temperature and by the clock. The DEWENWILS controller lists heating and cooling modes with cyclic timing and countdown, and the GECXGY controllers list cyclic timing, countdown and dimming. The Kasco C-20 pairs a thermostat with a time clock for a de-icer.
What temperature range do these controllers cover?
Three cover -40 to 210°F, and the Kasco C-20 covers 0 to 80°F with a factory setting of 30°F. Check the range against the heater or de-icer you run.
Do these controllers work for incubators?
The DEWENWILS and GECXGY controllers list incubators among their uses. The Kasco C-20 is made for 120V de-icers and water circulators, not for incubators.
What timer modes do these controllers have?
The DEWENWILS controller lists cyclic timing and countdown modes. Both GECXGY controllers list cyclic timing, countdown and dimming, and the Kasco C-20 sets the time of day for operation.
Do any of these controllers state a warranty?
The DEWENWILS controller states a 1 year manufacturer warranty. The other controllers here state no warranty term.
More coop guides
- Chicken Egg Incubator Temperature and Humidity Settings
- Chick Brooder Temperature: How to Set It and Read the Chicks
- Heat Lamp Temperature Control for Brooders
- Thermostat vs Timer for Coop Heater: Which One Should You Buy?
- How to Incubate Chicken Eggs at Home
- Best Incubator Thermometer Hygrometer Under $40 (2026)
See every incubator and hatching guide and all brooder guides.




