Trash Can vs Bucket Chicken Feeder: Which One Should You Buy?
Two DIY feeder styles compared on capacity, refills, ports and upkeep, with two bucket-side feeder port kits as concrete examples.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ZenxyHoC 4-Set Chicken Feeder and Waterer Kit9.5/10View on Amazon - 2
ZenxyHoC 8-Port Chicken Feeder Kit with Hole Saw9.5/10View on Amazon
Trash can vs bucket chicken feeder verdict: Choose a bucket chicken feeder for a small flock and a tight coop corner: the kits mount on a bucket you already own, and the 4-set adds water nipples to the same setup. Choose a trash can chicken feeder for a bigger flock or a large run, where a larger container stretches the time between refills.
Hauling the feed bag out to the coop every day gets old fast, and the container your feeder hangs on decides how often you make the trip. This trash can vs bucket chicken feeder comparison puts the two DIY styles side by side, with two bucket-side port kits from the listings as concrete examples. The same ports fit buckets, boxes, bins and troughs, so the real question is which container fits your flock and your routine.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
Two examples

ZenxyHoC 4-Set Chicken Feeder and Waterer Kit
A feeder and waterer port kit for buckets, barrels, bins and troughs, suited to keepers who want feed and water handled in one kit.
Who it's for: keepers who want feed and water handled in one kit on containers they already own.
Who should skip it: anyone who wants a feeder-only kit with a hole saw in the box, like the 8-port set.
The ZenxyHoC 4-set pairs feeder ports with water nipples for buckets, barrels, bins and troughs. The listing describes UV-resistant PVC and premium plastic built for rain, sun and wind, BPA-free plastic with smooth edges, and nipples that keep chickens from flicking dirt and bedding into the water. It states no warranty term.
Pros
- Feeder and waterer in one kit, with nipples that keep dirt and bedding out of the water
- BPA-free plastic with smooth edges that prevent injuries, per the listing
- UV-resistant PVC and premium plastic stand up to rain, sun and wind
- Automatic design cuts manual refills for busy keepers
Cons
- No warranty term is stated
- Fits buckets, barrels, bins and troughs; the container itself is not part of the kit
- 4 sets per kit, so bigger flocks may need more than one kit
- No hole saw or mounting instructions are stated

ZenxyHoC 8-Port Chicken Feeder Kit with Hole Saw
An 8-port feeder kit with a 3.15 inch hole saw, suited to keepers turning a spare bucket or bin into a gravity feeder.
Who it's for: keepers turning a spare bucket or bin into a gravity feeder with everything needed to cut the holes.
Who should skip it: anyone who also needs a waterer in the same kit.
The ZenxyHoC 8-port kit includes 8 feeder ports, 8 rubber rings and a 3.15 inch hole saw for mounting on buckets, boxes, bins and troughs. The listing says to mount the container 6 to 11 inches above the ground, describes a strong PP build and an airtight lid that keeps feed dry and stops other animals entering, and claims 15 to 31 percent less feed waste. Note the listing contradicts itself on color: the title says orange while the bullets describe a red design; the spec table’s 1 x 1 x 1 inch dimensions do not describe the kit either.
Pros
- 8 feeder ports with 8 rubber rings, plus a 3.15 inch hole saw in the box
- Ports fit buckets, boxes, bins and troughs, so one kit suits many container types
- Maker claims 15 to 31 percent less feed waste, and 5 to 11 percent from the lid
- Strong PP build the maker calls robust for coop environments
Cons
- No warranty term is stated
- The kit is ports, rings and a hole saw; you supply the drill and the container
- Feed ports only, with no waterer parts included
- Mounts 6 to 11 inches above the ground, with no stand or hanger listed
Other options for the coop
No Waste Chicken Feeders and WaterersCheck price on Amazon
55LBS Large Capacity Automatic Chicken FeederCheck price on Amazon
Teenyyou 20 Pack Quail Feeders No Waste DIY Feeder PortCheck price on Amazon
50LB Metal Chicken FeederCheck price on Amazon
Chicken Feeders No WasteCheck price on Amazon
No Waste Chicken FeedersCheck price on Amazon
Trash can vs bucket chicken feeder: side by side
| Factor | Trash can feeder | Bucket chicken feeder | What the listings state |
|---|---|---|---|
| Container | A lidded trash can or bin | A bucket, box, bin or trough | Ports fit buckets, boxes, bins, troughs (8-port kit) |
| Refills | Fewer; the can holds more feed per fill | More often; the bucket holds less per fill | No capacity stated |
| Feeder ports | Same DIY ports fit a bin; no ports stated for a trash can alone | 8 ports in the 8-port kit; 4 feeder sets in the 4-set kit | Both kits listed |
| Mounting height | Not stated | 6 to 11 inches above the ground | Stated in the 8-port listing |
| Lid | Not stated | Airtight lid keeps feed dry and stops other animals | 8-port kit |
| Feed waste claim | Not stated | 15 to 31 percent less waste; 5 to 11 percent from the lid | Maker claim, 8-port kit |
| Water option | Not stated | Water nipples included | 4-set kit |
Example figures are as published on each listing and collected 22 October 2026.
Capacity and refills
The real difference between these two feeders is the container, not the hardware. A trash can holds more feed per fill, so a bigger flock gets through more days between refills. A bucket holds less, so it suits a smaller flock and a coop corner where space is tight. Either way, the feeder ports are the same DIY kind: the 8-port listing says they mount on buckets, boxes, bins and troughs, so the choice is about how much feed you want to load at once.
Think about the chore, not just the container. A trash can feeder means fewer trips with the feed bag but a heavier lift when you do refill and clean it. A bucket feeder means more frequent refills but a container you can carry and scrub with ease. Our small vs large chicken feeder guide looks at sizing from the flock’s side.
Ports and mounting
Both example kits are DIY port sets that turn a container you own into a feeder. The 8-port kit includes 8 feeder ports, 8 rubber rings and a 3.15 inch hole saw, and the listing says to mount the container 6 to 11 inches above the ground so chickens can easily eat the food inside. The 4-set kit pairs feeder sets with water nipples for buckets, barrels, bins and troughs. Neither kit includes the container itself.
| Kit | Ports | Extras | Mounting height |
|---|---|---|---|
| ZenxyHoC 8-port kit | 8 ports, 8 rubber rings | 3.15 inch hole saw | 6 to 11 inches |
| ZenxyHoC 4-set kit | 4 feeder sets | Water nipples | Not stated |
The 6 to 11 inch range in the 8-port listing is the only mounting figure either listing states. See wall mounted vs hanging chicken feeder for placement ideas, and automatic vs gravity chicken feeder for how gravity kits like these feed.
Feed waste and the lid
Waste is where the lid earns its keep. The 8-port listing claims the ports save 15 to 31 percent of feed, and that its airtight lid saves another 5 to 11 percent by keeping feed dry in rain and stopping other animals from entering the container. Those are the maker’s figures, not measured results, but the mechanism is plain: feed that stays dry and unspilled is feed the flock actually eats.
Water on the side
Only one of the two kits handles water. The 4-set kit includes water nipples that keep chickens from flicking dirt and bedding into the water, which the listing says means less time spent changing water. The 8-port kit is feed ports only. If you want one container style for both feed and water, the 4-set’s nipples make the bucket side the simpler pick. See gravity waterer vs poultry nipples for how nipple waterers compare.
Flock fit
ZenxyHoC 4-Set Feeder and Waterer Kit
ZenxyHoC 8-Port Feeder Kit
Fitting It to Your Flock
- Mount the container 6 to 11 inches above the ground, per the 8-port listing, so the flock reaches the ports with ease.
- A bucket feeder suits a small coop corner; a trash can feeder suits a larger run where fewer refills matter.
- Keep the lid on in rain; the 8-port listing says its airtight lid keeps feed dry and stops other animals entering.
- Use the 4-set kit’s water nipples on your water container so dirt and bedding stay out of the water.
FAQ for the flock
What is the difference between a trash can chicken feeder and a bucket chicken feeder?
The container. Both use the same kind of DIY feeder ports, which the 8-port listing says fit buckets, boxes, bins and troughs. A trash can holds more feed per fill, so refills come less often; a bucket is easier to lift, move and clean.
How high should I mount a chicken feeder?
The 8-port listing says to place the container 6 to 11 inches above the ground, so chickens can easily eat the food inside.
Do these feeder kits include the bucket?
No. Both kits are ports, rings and nipples that mount on containers you already own; the 8-port kit even includes the 3.15 inch hole saw for cutting the mounting holes.
Can I use a feeder kit for water too?
The 4-set kit includes water nipples alongside its feeder sets. The 8-port kit is feed ports only, with no waterer parts.
How do no-waste feeder ports work?
Feed flows by gravity and the ports limit spilling; the maker of the 8-port kit claims 15 to 31 percent less feed waste. The airtight lid also keeps feed dry and stops other animals entering.
How the Coop Score came out
Each example is scored on performance, build, value, safety and warranty, using only what the listing publishes. Neither listing states a warranty. The weights are on our How We Pick page.
| Product | Keeper Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ZenxyHoC 4-Set Feeder and Waterer Kit | 9.5 | 28 | 20 | 21 | 5 | 0 |
| ZenxyHoC 8-Port Feeder Kit | 9.5 | 29 | 20 | 20 | 3 | 0 |
Keeper Scores run between 9.2 and 9.8. We spread weighted point totals across that window proportionally, so a product with more points always lands higher.
Which should you choose?
Choose a bucket chicken feeder if your flock is small, your coop corner is tight, and you like that the 4-set kit adds water nipples to the same container style.
Choose a trash can chicken feeder if you keep a bigger flock or a large run and want more feed per fill with fewer trips.
Pick a species and a set date for candling days, lockdown and hatch day, with a calendar file to save.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
More coop guides
- Wood vs Metal Chicken Feeder: Which One Should You Buy?
- Plastic vs Wood Chicken Feeder: Which One Should You Buy?
- Stainless vs Galvanized Chicken Feeder: Which One Should You Buy?
- Chick Waterer vs Chicken Waterer: Which One Should You Buy?
- Small vs Large Chicken Feeder: Which One Should You Buy?
- Hopper vs Trough Chicken Feeder: Which Feeds Better?
- Treadle Feeder vs Hanging Feeder: Which One Should You Buy?
- Automatic vs Gravity Chicken Feeder: Which One Should You Buy?
- Wall Mounted vs Hanging Chicken Feeder: Which Suits Your Coop?
- Gravity Waterer vs Poultry Nipples: Which One Should You Buy?
See every feeder and waterer guide.




