Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Brass vs Plastic Chicken Nipples: Which One Should You Buy?

Brass and plastic chicken nipples differ in material and build, and the listings here all describe ABS plastic with stainless steel.

Brass vs Plastic Chicken Nipples: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1senylanhxy 12-Piece Horizontal Chicken Waterer Nipples withsenylanhxy 12-Piece Horizontal Chicken Waterer Nipples with9.4/10View on Amazon
  2. 2My Pet Chicken 24-Pack Horizontal Side Mount Chicken WateringMy Pet Chicken 24-Pack Horizontal Side Mount Chicken Watering9.4/10View on Amazon
  3. 3letsFix 10-Piece Chicken Nipple and PVC Tee Waterer KitletsFix 10-Piece Chicken Nipple and PVC Tee Waterer Kit9.5/10View on Amazon
  4. 4shuielai 12 Pcs Horizontal Chicken Waterer Nipples with Drillshuielai 12 Pcs Horizontal Chicken Waterer Nipples with DrillView on Amazon
  5. 510Pack Horizontal Chicken Waterer Nipples with Cups-Poultry10Pack Horizontal Chicken Waterer Nipples with Cups-PoultryView on Amazon
  6. 66Pack Horizontal Automatic Poultry Nipples6Pack Horizontal Automatic Poultry NipplesView on Amazon
  7. 7Lind Kitchen 20PCS Chicken Watering Nipples Poultry DrinkingLind Kitchen 20PCS Chicken Watering Nipples Poultry DrinkingView on Amazon
  8. 815 Pack Horizontal Chicken Waterer Nipples15 Pack Horizontal Chicken Waterer NipplesView on Amazon
  9. 920 Pcs Horizontal Chicken Waterer Nipples with Drill Bits20 Pcs Horizontal Chicken Waterer Nipples with Drill BitsView on Amazon

Morning chores at the coop start with water: the old open bowl is full of bedding and dirt by noon, and the birds need clean water through the day. Brass vs plastic chicken nipples is the choice that decides what the drinker is made of, and the listings in this guide all describe the plastic side. This guide answers the question directly, then walks through the nipple kits in this guide by what each listing states.

Other options for the coop

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Brass vs plastic chicken nipples: the short answer

The short answer: every listing in this guide describes an ABS plastic body with a stainless steel pin, and none describes a brass nipple. Brass nipples are the metal-bodied alternative to these plastic ones, so the choice turns on what the listing states: the material of the body, the metal of the pin, the seal and the kit that comes with it. The plastic kits here state ABS plastic bodies and stainless steel, with threaded seals stated on three of the four, so this guide compares that plastic side from the listings and says what to check if you shop for a brass one.

What the listings state about plastic nipples

All four listings describe an ABS plastic body with stainless steel. The Hedume listing names a steel rod and the Trovabylske listing names a stainless steel pin that the bird pecks to release water, and both listings state the water flows only when the pin or rod is triggered and stops when the bird stops. Every listing mentions red: the Hedume, shuielai and PILHCY listings state a red color, and the Trovabylske listing describes a bright red casing, though its spec table lists the color as white and pink. The shuielai, PILHCY and Trovabylske listings say the red color draws the birds’ attention, and the PILHCY and Trovabylske listings say the birds adapt to the nipple quickly. The Hedume listing states a red color without describing its effect.

The seal is what keeps the coop dry. The shuielai kit uses gaskets, wing nuts and sealing tape, the PILHCY kit uses a tapered thread and a seal design with rubber gaskets, and the Trovabylske kit uses threaded 1/2 inch PVC tee fittings with gaskets and tape. The Hedume listing states no seal parts, only that the nipple tightens in by hand after drilling a hole in the side of the container.

The gear in this guide

The four kits below are ranked by what each listing states: the completeness of the kit, the seal design and the pack size against the flock.

Trovabylske 20-pack: 20 nipples with 20 tee fittings for 1/2 inch PVC pipes, 20 gaskets, 4 tapes and 1 drill bit, so the kit connects to PVC without glue. The listing describes a spring mechanism that flows only when poultry peck the stainless steel pin, and a bright red casing that draws the birds’ attention. The pack suits a keeper building a PVC watering line for a larger flock.

Hedume 50-pack: 50 horizontal nipples in ABS plastic and stainless steel, sized 1.4 inches in width and 1.4 inches in height with an 8mm thread. The listing suggests one nipple per every 4 chickens, and says to drill a hole in the side of the container and tighten the nipple in by hand. The pack suits a keeper watering a larger flock from a bucket or container.

PILHCY 10-pack: 10 horizontal nipples with 10 drip cups, 10 rubber gaskets, 10 wing nuts, 1 drill bit and seal tape. The listing describes a red tip that draws the birds’ attention, a tapered thread and seal design that keeps the coop dry, and gravity-based operation. The kit suits a small backyard coop.

shuielai 12-pack: 12 water nipples with gaskets, wing nuts, a drill bit and sealing tape, in ABS plastic and stainless steel. The listing describes a leakproof seal design with washers and tape, a red color that attracts chickens, and a horizontal style that supports natural drinking behavior. The kit suits a keeper setting up a first nipple waterer.

How to choose between brass and plastic

Start with the listing, not the material name. Check the body material first: the four kits here state ABS plastic, and a brass listing would state brass in the title or bullets. Then check the pin: the Hedume listing names a steel rod and the Trovabylske listing names a stainless steel pin, the part the bird pecks, and all four listings state stainless steel as a material.

Then check the seal and the kit. A threaded seal with gaskets, washers and tape is stated for the shuielai, PILHCY and Trovabylske kits, while the Hedume kit states a hand-tight fit after drilling. Count the nipples against the flock: the Hedume listing suggests one nipple per every 4 chickens, so a larger flock needs a larger pack. If you shop for brass, check the same four things in the listing: body material, pin metal, seal parts and pack size.

Chicken Coop Size Calculator

Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.

Open the calculator
Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

Are chicken nipples brass or plastic?

The nipples in this guide are plastic: all four listings describe ABS plastic bodies with stainless steel, and none states brass. Brass nipples are the metal-bodied alternative, so check the listing for the body material before ordering.

How many nipples does a flock need?

The Hedume listing suggests one nipple per every 4 chickens. Count the birds, then pick a pack that covers the flock.

Do chicken nipples leak?

The makers claim they do not: the shuielai, PILHCY and Trovabylske listings describe leakproof seals, and the Hedume listing states no leaking. Check the seal parts in the kit and the gaskets before filling the container.

How do you install a horizontal chicken nipple?

Drill a hole in the side of the container and tighten the nipple in by hand, as the Hedume listing describes, or connect the nipple to a 1/2 inch PVC pipe with a tee fitting, as the Trovabylske kit does. The shuielai, PILHCY and Trovabylske kits include a drill bit.

What size hole does a chicken nipple need?

The Hedume listing states an 8mm thread, and the Trovabylske kit fits 1/2 inch PVC pipes. Check the thread or fitting size in the listing before drilling, since the size differs by kit.

More coop guides

See the feeders and waterers guides and the chicken nipple waterer picks.

More buying guides