Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use a T-Post Puller

Hook a lever puller on the post, set the widened base on firm ground and work the handle down in short pulls, refitting lower until the post comes free.

How to Use a T-Post Puller
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR 36 in T Post PullerVEVOR 36 in T Post Puller9.5/10View on Amazon
  2. 236 in T Post Puller, Fence Post Puller36 in T Post Puller, Fence Post Puller9.5/10View on Amazon
  3. 3Wenses T-Post Puller PlateWenses T-Post Puller Plate9.4/10View on Amazon
  4. 4Yararday 36 in T-Post Puller Fence Post PullerYararday 36 in T-Post Puller Fence Post Puller9.3/10View on Amazon

A fence post that will not budge can eat a whole afternoon. The run fence needs moving, the old post stays put, and digging it out means a wide hole and a tired back. Learning how to use a t-post puller turns that job into a short series of pulls with a lever puller: hook it on the post, set the base on firm ground, push the handle down, and repeat until the post comes free. Listings were collected 10 November 2026.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

VEVOR 36 in T Post Puller

VEVOR 36 in T Post Puller

VEVOR9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 36 in steel T-post puller with a stated 660 lb load capacity, a lever effort-saving mechanism, a widened base and a powder-coated finish, at 14.33 pounds.

The VEVOR puller is a 36 in steel lever tool with a widened base and a powder-coated finish. The listing states a 660 lb load capacity in the title, a lever effort-saving mechanism that delivers maximum force with minimal effort, and a widened base that gives greater ground contact to avoid sinking or tipping. It pulls metal posts, stumps and fence stakes, and it suits farms, gardens and yards.

The title and the bullets disagree on capacity: the title states 660 lb and the bullets state 661 lbs (300 kg). The listing states the puller weighs 14.33 pounds and measures 35.98 x 5.91 x 5.91 in, and the lifting chain is not included. No warranty term is stated.

Pros

  • Stated 660 lb load capacity in the title
  • Lever mechanism delivers maximum force with minimal effort
  • Widened base gives greater ground contact
  • Powder-coated surface resists rust and wear

Cons

  • Lifting chain not included
  • No warranty term stated
  • No T-post width stated
36 in T Post Puller, Fence Post Puller

36 in T Post Puller, Fence Post Puller

TUGNOSTI9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 36 in steel T-post puller with a widened base, a powder-coated finish and stated steps for working the handle down the post, for round fence posts, sign posts and small tree stumps.

The TUGNOSTI puller is a 36 in steel lever tool with a widened base and powder-coating that helps prevent wear. The listing gives the clearest pull steps here: put the lock around a stud and push the handle down to pull the post upward, then raise the handle back up, fit it around a lower stud and repeat. It pulls round fence posts, sign posts and small tree stumps, plus wooden fence posts and cement plugs.

No load capacity, weight or warranty term is stated, and the lifting chain is not included.

Pros

  • Stated pull steps: hook a stud, push the handle down, refit lower
  • Widened base gives greater ground contact
  • Powder-coating helps prevent wear
  • Pulls round fence posts, sign posts and small tree stumps

Cons

  • No load capacity stated
  • No weight stated
  • Lifting chain not included
  • No warranty term stated
Wenses T-Post Puller Plate

Wenses T-Post Puller Plate

Wenses9.4/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bright orange plate cut from 9/16 in carbon steel with a powder-coated finish, made to grip studded T-posts up to 1.8 in wide when used with a high-lift jack or a chain up to 5/16 in.

The Wenses plate is a different kind of tool from the lever pullers here: a plate cut from 9/16 in carbon steel with a powder-coated finish, made to grip studded T-posts up to 1.8 in wide and lock in tight so the post lifts straight, without slipping or shifting. It works with most high-lift jacks or chains up to 5/16 in.

No load capacity or weight is stated, and no warranty term is stated. The bright orange finish stands out in grass, mud or gravel.

Pros

  • Cut from thick 9/16 in carbon steel
  • Grips studded T-posts up to 1.8 in wide
  • Works with a high-lift jack or chains up to 5/16 in
  • Bright orange finish is easy to spot in grass, mud or gravel

Cons

  • A plate only: it needs a high-lift jack or chain to pull
  • No load capacity stated
  • No weight stated
  • No warranty term stated
Yararday 36 in T-Post Puller Fence Post Puller

Yararday 36 in T-Post Puller Fence Post Puller

Yararday9.3/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 36 in round tube T-post puller for pulling a T post straight up from the ground.

The Yararday puller is listed with a title and one short bullet: a 36 in round tube puller for pulling a T post straight up from the ground. No material, weight, load capacity or warranty term is stated, and no usage steps are given.

Pros

  • 36 in round tube design
  • Made to pull a T post straight up from the ground
  • Same 36 in length as the VEVOR and TUGNOSTI pullers here
  • One stated job, so the use is clear

Cons

  • Title and one bullet only: no material, weight or capacity stated
  • No warranty term stated
  • No T-post width stated
  • No usage steps stated

Other options for the coop

How to use a t-post puller: hook on and pull straight up

A lever T-post puller hooks onto the post and lifts it straight up with a lever. The TUGNOSTI listing gives the steps: put the lock around a stud on the post and push the handle down to pull the post upward, then raise the handle back up, fit it around a lower stud and repeat until the post is out. The VEVOR listing states the lever delivers maximum force with minimal effort.

Set the base on firm ground

With a lever puller, the base pushes down on the ground while the tool pulls up on the post, so the base has to sit flat and firm. The widened base on the VEVOR and TUGNOSTI pullers (on Amazon) gives greater ground contact and avoids sinking or tipping, and the listings state its strong support directs all force vertically for the pull. Set the base on flat ground beside the post before the first pull.

When the post will not move

When a post will not move, the TUGNOSTI steps point to a lower hook: refit the lock around a lower stud and pull again, and repeat until the post gives. The Wenses plate (on Amazon) takes a different route: it grips a studded T-post while a high-lift jack or a chain up to 5/16 in does the lifting. The VEVOR listing states its puller handles stumps, and the TUGNOSTI listing states it handles small tree stumps, and both state the lifting chain is not included.

The gear for the job

The pullers below cover the steps above: the lever pullers lift the post with a lever, the plate grips a studded T-post for a jack or chain, and the round tube puller lifts a T post straight up.

Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

Is a chain needed with a T-post puller?

Not for the lever pullers. The VEVOR and TUGNOSTI pullers are lever tools, and their titles state the lifting chain is not included. The Wenses plate is different: it works with a high-lift jack or chains up to 5/16 in, so it needs that gear on hand.

What size T-posts does the Wenses plate fit?

Studded T-posts up to 1.8 in wide. The plate is cut from 9/16 in carbon steel and locks in tight to lift straight, without slipping or shifting.

How much weight can the VEVOR puller handle?

The title states a 660 lb load capacity, while the bullets state 661 lbs (300 kg), so the listing gives two figures for the same puller.

Can these pullers remove a small tree stump?

Only the VEVOR and TUGNOSTI listings state it. The VEVOR listing states its puller handles stumps, and the TUGNOSTI listing states it handles small tree stumps, wooden fence posts and cement plugs. The Wenses and Yararday listings state nothing about stumps.

How should a T-post puller be stored?

The VEVOR listing states its puller uses a vertical design that saves space, with fewer parts than stump or ground rod pullers. The other listings state nothing about storage.

More coop guides

See the manual T-post puller guide and the chicken runs and fencing hub.

More buying guides

Chicken Runs and Fencing ·

Best Metal T Post Puller Under $40 (2026)

Five metal T-post pullers under $40 compared by build, pulling design and what is in the box, from 2.35-pound plates to a 17 lb…