Manual T Post Puller: How to Choose One for Your Run Fence
A manual t post puller lifts a set fence post with a lever, a wide base and a chain, and this guide matches the listed pullers to run fence work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Dolibest 36 in Fence Post Puller9.6/10View on Amazon - 2
VEVOR 36 in T Post Puller with Plate and 479.6/10View on Amazon - 3
Insaga 36 in T Post Puller with Telescoping9.5/10View on Amazon - 4
Yararday 36 in T-Post Puller Fence Post Puller9.2/10View on Amazon
One fence post refuses to move. The run fence leans where the post shifted, the wire sags, and the birds find the gap before you do. A manual t post puller answers that chore with leverage instead of digging: a long handle, a wide foot and a chain that grips the post, so a steady pull lifts what a shovel would take an afternoon to free.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Dolibest 36 in Fence Post Puller
A 36 in puller with a maker-stated 660 lb capacity, a 5 mm base, an 18 mm one-piece claw and a non-slip round grip; the chain is not included.
Who it's for: a keeper who wants the strongest stated claw and base detail here and a grip that will not slip.
Who should skip it: anyone who wants a chain in the box.
Dolibest lists the DBFPP-01-OR at 36 in with a maker-stated 660 lb capacity, a 5 mm base, an 18 mm one-piece claw, a hardened alloy steel hook and a round rubber grip with a non-slip sheath. The reinforced square sleeve joint covers the handle-to-bracket connection, the joint the maker names as the usual failure point. The spec table lists a different length from the 36 in handle in the title, and the chain is not included.
Pros
- Maker-stated 660 lb capacity without bending
- 18 mm one-piece claw, alloy steel hook
- 5 mm base channels force straight down
- Non-slip round rubber grip
Cons
- Chain not included
- No warranty term is stated
- Orange is the only color stated

VEVOR 36 in T Post Puller with Plate and 47
A 36 in puller with a plate and a 47 in lifting chain included, a maker-stated 660 lb capacity and a 22.16 lb stated weight.
Who it's for: a keeper who wants the chain in the box and a stated 660 lb capacity for set run posts.
Who should skip it: anyone who wants a stated warranty or a non-slip grip.
VEVOR lists the BY-043-02 at 36 in with a plate and a 47 in lifting chain, and states a 660 lb capacity, 300 kg in the same bullet, on reinforced steel with a powder-coated surface. The spec table gives 37.4 x 5.91 x 5.91 in and a 22.16 lb weight, so the lengths do not agree; the title and bullets are the safer read. The widened base spreads the load, and the vertical design stores in a small space.
Pros
- 47 in lifting chain included
- 660 lb capacity, 300 kg in the same bullet
- Widened base spreads the load
- Vertical design stores in a small space
Cons
- No warranty term is stated
- No non-slip grip feature is stated
- 47 in chain has no adjustment stated

Insaga 36 in T Post Puller with Telescoping
A 36 in puller with a telescoping handle to 49 in, a wide base plate and a foldable carbon steel frame; the chain is sold separately.
Who it's for: a keeper who moves between fence lines and wants the handle to stretch for leverage and the tool to fold flat.
Who should skip it: anyone who wants a chain in the box or a stated capacity.
Insaga lists the INPP-001-A at 36 in with a telescoping handle that adjusts to 49 in, a wide base plate and a foldable carbon steel frame with a bright orange powder-coated finish. The bullets describe stepping on the wide base, gripping the anti-slip handle and pulling, for T-posts, wood stakes, sign posts and small tree stumps. The chain is sold separately, so the stated leverage depends on a chain the buyer adds.
Pros
- Telescoping handle, 36 in to 49 in
- Wide base plate for soft ground
- Folds flat for a truck bed or shed
- Carbon steel, rust-resistant powder-coated finish
Cons
- Chain sold separately
- No capacity in pounds is stated
- No warranty term is stated
- No weight is stated

Yararday 36 in T-Post Puller Fence Post Puller
A plain 36 in square tube puller for lifting a T post straight up from the ground, with no capacity, weight or chain stated.
Who it's for: a keeper who already has a chain and wants the plainest puller on the list.
Who should skip it: anyone who wants stated capacity, grip or warranty detail before buying.
Yararday lists a 36 in square tube puller in red, and the whole listing says little more: use it for pulling a T post straight up from the ground. No capacity, weight, base, grip or chain is stated, and no warranty term is stated either. The title and the bullets agree on the 36 in square tube design.
Pros
- Square tube design in title and bullets
- 36 in size matches the other pullers
- Stated use: pull a T post straight up
- Red finish stands out on a tool shelf
Cons
- No capacity in pounds is stated
- No weight, base or grip stated
- No warranty term is stated
- No chain stated as included
Other options for the coop
Field Tuff Manual T-Post PullerCheck price on Amazon
Osistga Fence Post PullerCheck price on Amazon
BISupply T Post Puller Fence Post PullerCheck price on Amazon
T-Post Puller Fence Post PullerCheck price on Amazon
Yararday 36" T-Post Puller Fence Post PullerCheck price on Amazon
How a manual t post puller lifts a set post
The tool works as a lever. The chain wraps low around the post and hooks to the puller head, the base plate sits flat on the ground, and the handle gives your pull a long arm. Step on the wide base, grip the handle and pull, and the post rises straight up. A wide base matters on soft ground, where a narrow foot sinks and wastes the pull.
What to look for before you buy
Capacity comes first. The Dolibest and VEVOR listings state a 660 lb capacity, and the Insaga and Yararday listings state none. Then look at the base: a wide plate holds on soft ground where a narrow foot sinks. Check the chain next. The VEVOR includes a 47 in lifting chain, the Insaga notes its chain is sold separately, and the Dolibest notes its chain is not included. Last, look at the grip and the joints, because a handle that slips and a joint that bends will end the job early.
Manual t post pullers for run fence work
Each puller below handles one part of the same job: lifting a set post out of the ground without digging around it.
How to pull a set post without straining the fence
Clear the wire from the post and check that nothing else ties the post to the fence. Set the base plate flat on the ground, wrap the chain low around the post and hook it to the puller head. Step on the base, take the handle with both hands and pull in a steady motion, letting the lever do the work. If the post holds, reset the chain lower and pull again rather than jerking the handle. Once the post is out, fill the hole before the birds find it, and a manual t post driver sets the replacement post.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
Can a manual t post puller lift a post from a chicken run fence?
Yes. Run fences use the same steel T-posts and round posts as garden and farm fences, and the pullers in this guide list T-posts, round fence posts and sign posts among their uses.
Do I need a chain with a manual t post puller?
The puller needs a chain or a rope to grip the post. The VEVOR includes a 47 in lifting chain, the Insaga notes the chain is sold separately, and the Dolibest notes the chain is not included. The Yararday listing states no chain either way, so plan on adding one.
Will a manual t post puller work on round fence posts?
Yes, according to the listings. The VEVOR, Insaga and Dolibest listings all name round posts as a stated use, and each one also lists T-posts.
What should I check before pulling a post near the coop?
Look for anything tied to the post first: wire, netting and any cable or cord on the fence. Free the wire before you pull, keep the birds shut in the coop while you work, and check local, HOA and state rules for a boundary fence.
How do I store a manual t post puller?
Keep it dry and out of the birds’ way. The VEVOR uses a vertical design that saves space, the Insaga folds flat for a truck bed or shed, and the Dolibest folds compact for storage.
More coop guides
- Manual T Post Driver: How to Choose and Use One
- Manual Fence Post Driver: How to Choose the Right One
- How Deep Post for Fence: Setting Run Posts That Stay Straight
- Types of Wire Fence for Chicken Runs
- Best T Fence Posts (2026): 5 Picks Compared
- Best T Fence Posts for Poultry Netting (2026): 4 Compared
See the chicken runs and fencing picks for the wire, posts and hardware that go with a mended fence line.




