Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use Fencing Pliers

Fencing pliers cut wire, pull staples and nails, twist joins tight and hammer, once the jaw matches the job.

How to Use Fencing Pliers
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Crescent 10 in Heavy-Duty Solid Joint Fence ToolCrescent 10 in Heavy-Duty Solid Joint Fence Tool9.5/10View on Amazon
  2. 2WORKPRO Fencing Pliers, 10 in Multi Fence PliersWORKPRO Fencing Pliers, 10 in Multi Fence Pliers9.5/10View on Amazon
  3. 3BILITOOLS 2 PC 10 in Fencing PliersBILITOOLS 2 PC 10 in Fencing Pliers9.5/10View on Amazon
  4. 4Bates Multi-Plier Fence Tool, 10.8Bates Multi-Plier Fence Tool, 10.89.4/10View on Amazon

A run fence rarely fails without warning. A staple works loose, a wire sags between posts, and the flock finds the gap before the keeper does. How to use fencing pliers comes down to matching the jaw to the job: cut the wire, pull the staple, twist the join tight, and tap the fence back into place.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Crescent 10 in Heavy-Duty Solid Joint Fence Tool

Crescent 10 in Heavy-Duty Solid Joint Fence Tool

Crescent9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 in solid-joint fence tool with an angled head for offset cutting, a staple puller and a dipped grip, with a standard limited lifetime warranty.

The Crescent is a dedicated cutter and staple puller: a 10 in solid-joint fence tool with an angled head for offset cutting, a staple puller in the jaws and a dipped grip that is easy to hold and clean. The listing states corrosion-resistant alloy steel with a polished head, and a weight of 1.65 pounds.

Pros

  • Angled head for offset cutting
  • Staple puller built into the jaws
  • Corrosion-resistant alloy steel, polished head
  • Standard limited lifetime warranty

Cons

  • No hammer head stated
  • No nail puller stated
  • No pouch or second tool is listed
WORKPRO Fencing Pliers, 10 in Multi Fence Pliers

WORKPRO Fencing Pliers, 10 in Multi Fence Pliers

WORKPRO9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 in multi fence pliers with six functions: wire cutting, nail pulling, staple removal, gripping, hammering and twisting, in CR-V steel.

The WORKPRO packs six functions into one 10 in tool: wire cutting, nail pulling, staple removal, gripping, hammering and twisting. The listing states heavy-duty chrome vanadium steel with a blackened finish, precision polishing and transparent electrophoresis, plus an ergonomically shaped handle that fits the hand and reduces strain.

Pros

  • Six functions in one tool
  • CR-V steel with blackened finish
  • Ergonomic handle for long jobs
  • Cuts, twists, pulls and hammers without tool changes

Cons

  • No warranty term is stated
  • No weight is stated
  • No pouch is listed
  • One tool only, not a set
BILITOOLS 2 PC 10 in Fencing Pliers

BILITOOLS 2 PC 10 in Fencing Pliers

BILITOOLS9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece set with one 10 in multi fencing plier and one 10 in heavy-duty fencing plier, plus a storage pouch, in heat-treated CR-V steel.

The BILITOOLS set covers daily and professional fence work with two 10 in pliers: a multi plier with a hammer head and a heavy-duty plier with stronger cutting power, plus a storage pouch. The listing states heat-treated chrome vanadium steel with a blackened finish, and jaws that cut wire, pull nails, grip, hammer and twist.

Pros

  • Two 10 in pliers in one set
  • Storage pouch included
  • Heat-treated CR-V steel
  • Multi plier has a hammer head; heavy-duty plier cuts stronger

Cons

  • No warranty term is stated
  • No weight is stated
  • Two tools to carry instead of one
Bates Multi-Plier Fence Tool, 10.8

Bates Multi-Plier Fence Tool, 10.8

Bates Choice9.4/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A multi-plier fence tool with a corrugated hammer head, two wire cutters, staple grips and a wire grip for stretching wire, with a 7/32 in cutting capacity.

The Bates is a multi-plier fence tool with a corrugated hammer head, two wire cutters, staple grips and a wire grip for stretching wire, made from polished steel alloy with a soft plastic coated grip. The listing states a 7/32 in cutting capacity.

Pros

  • Corrugated hammer head included
  • Two wire cutters in the jaws
  • 7/32 in cutting capacity stated
  • Wire grip for stretching wire

Cons

  • Title says 10.8 in, bullets say 10 in
  • No warranty term is stated
  • No pouch is listed
  • Soft plastic grip, not a dipped grip

Other options for the coop

How to use fencing pliers

Set the wire in the cutters with the cut lined up where the fence needs it, squeeze the handles to cut through, and keep the cut end pointed away from the flock. To pull a staple, grip it with the staple puller, rock the pliers back, and lift the staple straight out of the post. To join wire, overlap the ends, grip them with the jaws, and twist until the join holds tight.

  1. Walk the fence first. Look for loose staples, sagging wire and gaps at the posts before picking up the pliers.
  2. Wear gloves and eye protection. Cut wire ends can snap back when the cut lets go.
  3. Cut with the cutters, not the tips. Set the wire deep in the cutters and squeeze the handles in one steady motion.
  4. Pull staples straight out. Grip the staple, rock the pliers back, and lift it out of the post without tearing the wire.
  5. Twist joins tight. Overlap the wire ends, grip them with the jaws, and twist until the join holds.
  6. Tap staples home with the hammer head where the tool has one. Seat each staple firm against the wire without crushing the wire.
  7. Check the run again. Walk the fence once more and look for gaps the flock could slip through.

Cut, pull, twist and hammer: what the jaws do

Tool Cut Pull Twist and hammer
Crescent 10 in Fence Tool Angled head for offset cutting Staple puller No hammer head stated
WORKPRO 10 in Fencing Pliers Wire cutting Nail pulling, staple removal Twisting and hammering
BILITOOLS 2 PC Fencing Pliers Wire cutting, stronger on the heavy-duty plier Nail and staple pulling Wire twisting, hammer head on the multi plier
Bates Multi-Plier Fence Tool Two wire cutters, 7/32 in cutting capacity Nail and staple pulling Wire grip for stretching wire, corrugated hammer head

The jaws decide the job. A cutter with an angled head reaches wire tight against a post, a staple puller lifts staples without tearing the wire, and a hammer head seats staples and taps the fence back into place. The WORKPRO lists six functions in one tool, and the BILITOOLS set splits the work across two pliers.

How to use fencing pliers: the gear

The steps above need cutting, pulling, twisting and hammering, so the pliers below cover each of those jobs on the run fence.

Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

Can fencing pliers cut barbed wire?

The listings describe these pliers for fence wire, including barbed wire fence tools. The Bates listing states a 7/32 in cutting capacity, so check the wire against the capacity stated for the pliers you hold before cutting.

How do fencing pliers pull staples?

Grip the staple with the staple puller jaws, rock the pliers back, and lift the staple straight out of the post. The Crescent, WORKPRO and Bates listings all name staple pulling as a function.

Do I need a hammer as well as fencing pliers?

The WORKPRO, BILITOOLS multi plier (on Amazon) and Bates tools include a hammer head or hammer face, so they tap staples home without a separate hammer. The Crescent listing states no hammer head, so keep a hammer nearby for that tool.

What size fencing pliers fit a chicken run?

The Crescent, WORKPRO and BILITOOLS pliers are 10 in, and the BILITOOLS set holds two 10 in pliers. The Bates listing gives 10.8 in in the title and 10 in in the bullets, so its length is not settled. A 10 in tool reaches across run wire and still fits in a tool pouch.

Can fencing pliers twist wire joins?

Yes. The WORKPRO and BILITOOLS listings name wire twisting as a function, and the Bates listing names a wire grip for stretching wire. Overlap the wire ends, grip them with the jaws, and twist until the join holds tight.

More coop guides

See the chicken runs and fencing guides and the types of wire fence guide.

More buying guides