Pvc vs Galvanized Chicken Feeder: Which One Should You Buy?
PVC feeders will not rust and are light and easy to clean; galvanized feeders are tougher but can rust, and the choice comes down to weather and wear.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
perfsign Complete Pipeline Automatic Chicken Waterer Cups and9.6/10View on Amazon - 2
Plexon 17.6 lb9.6/10View on Amazon - 3
MJZ 2 Pack PVC Chicken Grit and Oyster Shell Feeder withView on Amazon - 4
PVC Pipe Chicken Coop FeederView on Amazon - 5
3 Pack Automatic Chicken Feeder No WasteView on Amazon - 6
HOMAR 3pcs PVC Chicken Feeder No Waste 6lb Large CapacityView on Amazon - 7
Pvc Chicken Feeder With Lid 6 Pound Pvc Pipestyle ChickenView on Amazon - 8
Homar 1pcs PVC Chicken Feeder No Waste 6lb Large CapacityView on Amazon
When the old feeder starts rusting through or cracking at the seams, the replacement question is usually PVC vs galvanized chicken feeder. The short answer: PVC feeders will not rust, are light and easy to clean, while galvanized steel feeders are heavier and tougher but can rust once the coating wears. For most backyard coops, especially in wet weather, PVC wins on maintenance; for rough use and big flocks, galvanized wins on toughness. The listings cited here are all PVC, so the galvanized side is described from general practice rather than listing figures.
Other options for the coop
MJZ 2 Pack PVC Chicken Grit and Oyster Shell Feeder withCheck price on Amazon
PVC Pipe Chicken Coop FeederCheck price on Amazon
3 Pack Automatic Chicken Feeder No WasteCheck price on Amazon
HOMAR 3pcs PVC Chicken Feeder No Waste 6lb Large CapacityCheck price on Amazon
Pvc Chicken Feeder With Lid 6 Pound Pvc Pipestyle ChickenCheck price on Amazon
Homar 1pcs PVC Chicken Feeder No Waste 6lb Large CapacityCheck price on Amazon
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
PVC vs galvanized chicken feeder at a glance
| Aspect | PVC | Galvanized steel |
|---|---|---|
| Rust | Will not rust | Can rust where the coating is scratched |
| Weight | Light; easy to hang and move | Heavier; stays put in wind |
| Cleaning | Smooth and easy to clean | Needs thorough drying after washing |
| Toughness | Can crack on a hard knock | Dents rather than cracks |
| Listed capacities | 5 to 6 lb gravity feeders | Not in the listings |
The table sums up the trade: PVC asks less of you, galvanized takes more punishment. Everything below follows from that difference.
The PVC side: what the listings show
PVC gravity feeders dominate the listings, and their figures tell a consistent story. The ANGAR and MJZ listings are grit and oyster shell feeders in the same PVC gravity style: each holds 5 pounds and is rated by its maker to support 6 chickens for 2 weeks, or up to 14 days. The HOMAR feeder holds 6 pounds at 19.3 inches long by 6.7 inches wide with a 3.8-inch inner tube diameter, and the Chewoof holds 3.2 kg, about 7 pounds, in a 25.2 by 13.8 inch body. Wall thickness is stated too: about 5mm on the Chewoof and about 0.09 inches on the HOMAR. Both makers describe their feeders as not easy to damage or deform.
The PVC advantages in the listings are practical ones. The MJZ listing notes its feeder has no sharp edges compared to metal feeders and will not rust. The IMJEGEM.Q feeder is 19 inches tall with a 4.3-inch diameter, rainproof covers on top and on the discharge port, and a stated easy-clean design. Several listings add drainage holes and lids to keep feed dry. For a small backyard flock, a 5 to 6 pound PVC gravity feeder hung on the coop wall covers days of feeding with little upkeep.
The galvanized side
Galvanized steel feeders are sheet metal with a zinc coating, usually in hanging or trough shapes. The coating is the whole game: intact, it shrugs off weather; scratched through to bare steel, it starts to rust, and rust is what ends a galvanized feeder’s life. They are heavier than PVC, which keeps them steadier in wind and harder for birds to knock about, and they stand up better to chewing and rough handling. Cleaning takes more care: wash and dry them thoroughly, because standing moisture finds every scratch. None of the listings here is galvanized, so there are no listing figures for this side.
Ports, mounting and refill rhythm
Feeder ports are the add-on route the listings describe. The ayakol listing details ports with a 1.6x taller anti-snag opening, a crystal-clear protective cover that keeps rain and dust out while letting light into the feeding area, and a 3-stage no-waste system the listing rates at under 5 percent loss. The ports use thickened UV-stabilized ABS that the listing says resists cracking in sun, rain or snow, and the standardized mounting fits both square and round containers. If you already own a suitable container, ports convert it into a PVC feeder without buying a whole new unit.
Mounting decides where the feeder lives. The ANGAR listing ships 6 screws and 8 zip ties and mounts to wooden fences, walls or metal nets. The MJZ listing describes two methods: zip ties on wire mesh, or screws on walls and wooden boards. Zip ties keep the feeder movable for run rotation; screws make it permanent for windy sites. The MJZ listing also notes its feeder is lightweight and easy to move, which matters when the feeder comes down for cleaning.
Size the feeder to your refill rhythm. The HOMAR 6-pound feeder typically feeds a flock for about two days per refill, and the Chewoof 3.2 kg feeder sustains chickens for approximately 2 days. The 5-pound ANGAR and MJZ supplement feeders are rated for 6 chickens for about two weeks. Bigger is not always better: feed left sitting too long can go stale or damp, so match capacity to how often you visit the coop rather than buying the largest tube available.
Which should you choose
Choose PVC if your coop sees a lot of rain or humidity, if you hang feeders on wire or walls and move them around, or if easy cleaning matters most to you. The listings make a strong case: rust-proof, light, smooth to clean, with lids and drainage built in. Choose galvanized if toughness comes first: big flocks, rough ground, or a feeder that will take knocks for years. Either way, keep feed dry with a lid and check the feeder each season: look for cracks in PVC and rust spots on galvanized, and replace the feeder when the material starts to fail rather than patching it along.
For feeder styles beyond the material question, see our treadle vs gravity chicken feeder comparison and chicken feeder ideas for setups.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
Will a PVC feeder crack in winter?
PVC can get brittle in a hard freeze and crack if knocked, which is the main cold-weather weakness in the listings’ favor for metal. Hang it where it will not take blows and it should come through the season fine.
Do galvanized feeders rust?
Eventually, where the zinc coating is scratched or worn through. Keeping the feeder dry and touching up scratches extends its life, but rust is the reason galvanized feeders get replaced.
How much feed do these PVC feeders hold?
The ANGAR and MJZ listings are grit and oyster shell feeders: each states 5 pounds. The HOMAR states 6 pounds and the Chewoof states 3.2 kg, about 7 pounds. The 5-pound supplement feeders are rated for 6 chickens for about two weeks.
How many chickens can eat at once?
The Chewoof listing says its feeder fits up to 3 chickens eating simultaneously, and the HOMAR says the same for its 19.3-inch model. Longer tube feeders give more birds room at once.
Which is easier to clean?
PVC, by the listings’ own description: smooth, waterproof and easy to clean, with lids and drainage holes to keep feed dry. Galvanized needs the same washing plus thorough drying to protect the coating.
More coop guides
- Treadle vs Gravity Chicken Feeder: Which Wastes Less?
- Chicken Feeder Ideas: Setups and Designs for Backyard Flocks
- Best Chicken Feeder Ports (2026): 5 Top DIY Kits
- Best Wall Mounted Chicken Feeder: 5 Space-Saving Picks (2026)
- Best Chicken Feeder for Small Flock (2026): Top Picks Compared
See the feeder and waterer picks and the coop supply guides.




