Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use a Post Hole Auger for Fence Posts

Mark the fence line, check the fuel mix, fit the right bit and drill straight, with four gas augers for run fence posts.

How to Use a Post Hole Auger for Fence Posts
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1WORKIT 72CC Post Hole Digger with 4WORKIT 72CC Post Hole Digger with 49.6/10View on Amazon
  2. 2NEO-TEC 72CC Post Hole Digger with 6NEO-TEC 72CC Post Hole Digger with 69.6/10View on Amazon
  3. 3PROYAMA 54CC Post Hole Digger with 4, 6PROYAMA 54CC Post Hole Digger with 4, 69.5/10View on Amazon
  4. 4Prowoo 72CC Post Hole Digger with 6 and 8 in BitsProwoo 72CC Post Hole Digger with 6 and 8 in Bits9.3/10View on Amazon

A run fence starts with posts that stand straight, and posts that stand straight start with holes dug straight and to the right depth. A gas auger digs each hole far faster than a manual digger. This guide shows how to use a post hole auger for a chicken run fence, with four gas augers for the job.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

WORKIT 72CC Post Hole Digger with 4

WORKIT 72CC Post Hole Digger with 4

WORKIT9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 72CC gas auger with 4, 6 and 12 in bits, 20 and 30 in extension rods, a 50 to 1 fuel mix, a 1.4L tank and an emergency stop switch.

WORKIT pairs a 72CC engine with 4, 6 and 12 in bits and 20 and 30 in extension rods, the longest rods here. The fuel mix is 50 to 1 with a 1.4L tank, and OptiSpark ignition is stated to give steady sparks whether the engine is cold or hot. An emergency stop switch sits on the handle, the grip is anti-vibration, and the kit adds a pre-mix oil jug, a spare spark plug, gloves and a start-up guide. EPA certification is stated.

Pros

  • 72CC engine with 4, 6 and 12 in bits for posts and planting
  • 20 and 30 in extension rods for deeper holes
  • Emergency stop switch on the handle
  • EPA certification stated, with a spare spark plug and gloves

Cons

  • No warranty term is stated
  • No 8 or 10 in bit for standard fence posts
  • No weight is stated
  • Extension rods run to 30 in, the longest here
NEO-TEC 72CC Post Hole Digger with 6

NEO-TEC 72CC Post Hole Digger with 6

NEO-TEC9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 72CC gas auger with 6, 10 and 12 in bits, two 8 in extension rods, a 25 to 1 fuel mix and a 17.6 lb body that drills earth and ice.

NEO-TEC pairs a 72CC 2-stroke engine with 6, 10 and 12 in bits and two 8 in extension rods, 16 in total. The 6 in bit is stated for tree planting and ice fishing, the 10 in bit for fence posts and sign installation, and the 12 in bit for deck footings and deep foundations. The engine runs on a 25 to 1 gas and oil mix, drills earth and ice, and the 17.6 lb body has cushioned anti-vibration grips and a throttle safety lock.

Pros

  • 72CC engine for clay, compacted soil, thick roots and frozen ground
  • 10 in bit is stated for fence posts and sign installation
  • Two 8 in extension rods, 16 in total, for deeper holes
  • 17.6 lbs with anti-vibration grips and a throttle safety lock

Cons

  • Smallest bit is 6 in, with no 4 or 8 in bit
  • Fuel tank capacity is not stated
  • 16 in of extension, less than the 20 and 30 in WORKIT rods
  • 41.34 in long, the longest body here
PROYAMA 54CC Post Hole Digger with 4, 6

PROYAMA 54CC Post Hole Digger with 4, 6

PROYAMA9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 54CC gas auger with 2.4HP and 1300W, four bits from 4 to 12 in, 12 and 20 in extension rods and alloy steel bits with a powder-coated finish.

PROYAMA brings the most bits here: 4, 6, 8 and 12 in, with 12 and 20 in extension rods. A 54CC engine is stated at 2.4HP and 1300W, with an easy-start system and an ergonomic handle. The heavy-duty gearbox has ball-bearing shafts and alloy gears, the alloy steel bits have a powder-coated finish, and the welded steel handle adds stability.

Pros

  • Four bits, 4, 6, 8 and 12 in, the most here
  • 2.4HP and 1300W from a 54CC engine
  • 12 and 20 in extension rods for deeper holes
  • Alloy steel bits with a powder-coated finish, welded steel handle

Cons

  • 54CC is the smallest engine here
  • No safety lock or stop switch is stated
  • No fuel mix is stated
  • No fuel tank capacity is stated
Prowoo 72CC Post Hole Digger with 6 and 8 in Bits

Prowoo 72CC Post Hole Digger with 6 and 8 in Bits

Prowoo9.3/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 72CC gas auger with 6 and 8 in bits, a 1 metre full length and a 60cm extension rod, made for one or two person operation.

Prowoo pairs a 72CC engine with 6 and 8 in bits at 1 metre full length and a 60cm extension rod. The bits can be changed, sharpened and replaced, and the auger is stated for one or two person operation with ergonomic hand grips, a finger throttle and switch control on the handlebar. The kit includes a fuel mixing bottle and a tool kit for assembly.

Pros

  • 72CC engine for fence posts, poles, trees and shrubs
  • Bits can be changed, sharpened and replaced
  • One or two person operation with ergonomic hand grips
  • Fuel mixing bottle and tool kit included

Cons

  • No warranty term is stated
  • Only two bits, 6 and 8 in, with no 10 or 12 in bit
  • No weight is stated
  • No fuel mix is stated

How to use a post hole auger: mark the fence line first

Mark the fence line and the post spots before the engine starts. A straight line and even spacing keep the posts lined up along the run, and the auger only digs where you point it. Check the ground for roots, rocks and buried lines before you drill, and keep the flock in the coop while you work.

Check the ground and the fuel mix

Match the auger to the ground. The NEO-TEC is stated for hardpan clay, compacted soil, thick roots and frozen ground, and the PROYAMA for soil, clay and tough ground. The NEO-TEC is stated to drill earth and ice, so that machine serves the fence line in summer and frozen ground in winter. Check the fuel mix before you start: the NEO-TEC runs on a 25 to 1 gas and oil mix and the WORKIT on a 50 to 1 mix, so mix the fuel for the machine you hold. Our electric post hole digger for rocky soil guide covers rocky ground.

Fit the bit and the extension rod

Fit the bit for the post. The NEO-TEC names its 10 in bit for fence posts and sign installation, its 6 in bit for tree planting and ice fishing, and its 12 in bit for deck footings and deep foundations. The PROYAMA gives four bits, 4, 6, 8 and 12 in, and the WORKIT gives 4, 6 and 12 in. Add an extension rod for a deeper hole: the NEO-TEC gives two 8 in rods, 16 in total, the PROYAMA gives 12 and 20 in rods, the WORKIT gives 20 and 30 in rods, and the Prowoo gives a 60cm rod.

Drill straight and clear the hole

Hold the auger upright with both hands, start the engine and feed the bit down steadily, keeping a firm grip so a root or rock cannot twist it out of your hands. Lift the auger out often to clear the spoil, and check the hole stays straight before you go deeper. The Prowoo is stated for one or two person operation, so a second pair of hands helps on a long fence line. The NEO-TEC weighs 17.6 lbs, so one person can carry it between holes.

Set the post and check it stands straight

Drop the post in the hole and check it stands straight before you backfill. Our how deep post for fence guide covers setting run posts that stay straight, and our should fence posts be set in concrete guide covers what to set them in. Check it now, while it is still easy to adjust.

Augers for the job

The four augers below cover the steps above: bit sizes, extension rods, fuel mix and safety features.

A simple fence-post checklist

  • Fence line is marked and post spots are set
  • Fuel mix is checked for the machine in hand
  • Bit matches the post, and the extension rod is fitted
  • Holes are straight and cleared of spoil
  • Posts stand straight before backfill
  • Engine is off and cool before storage

For the full run build, see our chicken run set up guide.

Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

What size auger bit do I need for a fence post?

The NEO-TEC names its 10 in bit for fence posts and sign installation. The bits here run from 4 to 12 in, so match the bit to the post and the ground, not to the biggest bit in the box.

Can a post hole auger drill through clay and frozen ground?

The NEO-TEC is stated for hardpan clay, compacted soil, thick roots and frozen ground, and the PROYAMA for soil, clay and tough ground. For rocky ground, see our electric post hole digger for rocky soil guide.

What fuel mix does a gas post hole auger use?

It depends on the machine. The NEO-TEC runs on a 25 to 1 gas and oil mix and the WORKIT on a 50 to 1 mix, so check the manual for the auger you hold and mix the fuel to match.

Can one person run a post hole auger?

The Prowoo is stated for one or two person operation, and the NEO-TEC weighs 17.6 lbs with balanced weight distribution. A second person helps on a long fence line, and on clay or frozen ground.

Do I need an extension rod for fence posts?

Not always, but rods add depth. The NEO-TEC gives two 8 in rods, 16 in total, the PROYAMA gives 12 and 20 in rods, the WORKIT gives 20 and 30 in rods, and the Prowoo gives a 60cm rod.

More coop guides

See our post hole auger vs post hole digger comparison and the chicken run set up guide.

More buying guides

Chicken Runs and Fencing ·

Types of Post Hole Diggers for Fencing

Clamshell, hand auger and powered auger compared for a chicken run fence, with advice on rocky ground and choosing the right digger.