Cost of Hog Panels: What to Expect Per Panel
Hog panel prices depend on height, length, wire gauge and coating, so compare listings on each of those figures before buying fence for a chicken run.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Spec Ops 11/16 in Hog Rings9.7/10View on Amazon - 2
Rustark 1/2 in Hog Rings9.6/10View on Amazon - 3
Rustark 3/8 in Hog Rings9.6/10View on Amazon
Building a run that holds up starts with the fence. A panel that sags, gaps at the bottom or rusts through in a season means chasing birds and patching wire instead of enjoying the flock. The cost of hog panels is the question most keepers ask before ordering, and the answer comes down to the size, the wire and the coating on the listing in front of you.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
What the cost of hog panels covers
A hog panel price covers the panel itself, and the listing tells you what that panel is: its height, its length, the wire gauge and the coating. Listings in the fence pool run from 4 ft high to 6 ft high, and from 50 ft long to 328 ft long. A taller panel and a longer roll use more steel, so comparing listings means matching height and length before looking at anything else. The chicken runs and fencing guides show how panels fit into a run build.
Panel height and length set the size of the job
Height is the figure that shapes the fence line. Listings show 4 ft, 5 ft and 6 ft heights. The 6 ft rolls list cattle, deer, goats and hogs among their uses, while the 4 ft rolls list garden borders and backyard fence sections. Length runs from a 50 ft roll to a 328 ft roll, with 100 ft and 164 ft rolls in between. A 328 ft roll suits a long fence line, while a 50 ft roll suits a short section or a divider inside a run. Measure the fence line, then match the roll length to it, and check the listing height against the posts and rails already in place. For help sizing the run itself, the chicken run size calculator works out the space the flock needs.
Wire gauge and mesh shape the fence
Gauge is the thickness of the wire, and lower numbers mean thicker wire. Listings show 12-gauge and 14-gauge wire, and a maker notes its 14-gauge wire is 23% thicker than standard 16-gauge fences. Thicker wire resists bending and sagging under pressure from stock leaning on the fence. Mesh shape matters too. Several listings use a graduated mesh that gets smaller toward the bottom, which keeps small animals from slipping through low down while leaving larger openings higher up. The Maxsa listing states the opposite spacing, with 2 inch spacing at the top and 4 inch spacing at the bottom, so its openings get larger toward the bottom rather than smaller. A listing also uses a steady 2 x 4 inch rectangular grid across the whole roll. When comparing listings, check the gauge and the mesh size on each listing, since a thin wire with wide openings is a different fence from a thick wire with tight mesh. The welded wire fence guide compares rolls by gauge and size.
Galvanized coating and how long a fence lasts
Almost every listing in the pool describes a galvanized coating, often a hot-dip galvanized finish, which the makers state resists rust and corrosion. A coating matters because fence wire lives outside in rain and damp, and rust thins wire over time. A maker states its fence holds tension for 10+ years, and another notes its galvanized finish resists rust and wear. Look for the words hot-dip galvanized on the listing, and check whether the coating covers the welds and joints as well as the wire. A roll that arrives with a bright silver finish and a stated galvanized coating is the standard to expect from the listings here.
How to compare hog panel listings
Start with height and length, then gauge, then mesh and coating. Listings that match on those figures are the ones worth comparing side by side. Roll weight is a useful cross-check on the listing: a 4 ft x 328 ft roll lists 63.38 pounds, a 6 ft x 328 ft roll lists 99.72 pounds, a 5 ft x 328 ft roll lists 106.92 pounds and a 4 ft x 50 ft roll lists 39.68 pounds. Weight varies with height, length and gauge, so a roll that is far lighter than others of the same size deserves a closer look at its gauge and wire. Check the listing for gloves, zip ties or other extras only after the fence figures match, since extras do not change how the fence holds stock. The how to cut cattle panel guide covers cutting panels to fit a run.
A simple hog panel checklist
- Height matches the fence line and the posts in place
- Length matches the run measured on the ground
- Gauge is stated on the listing, with 12-gauge thicker than 14-gauge
- Mesh size is stated, and the bottom openings suit the animals kept inside
- Coating is stated as galvanized, ideally hot-dip galvanized
- Roll weight lines up with other rolls of the same size and gauge
For more on fencing costs across the coop, see the price of a chicken coop guide.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
How much are hog panels?
No price is stated on the listings used for this guide, so there is no figure to quote. The cost of hog panels moves with height, length, wire gauge and coating, and listings run from 4 ft to 6 ft high and from 50 ft to 328 ft long. Compare listings that match on those figures, and check the gauge and coating before deciding.
What size hog panel suits a chicken run?
It depends on the fence line and the animals kept inside. Listings show heights of 4 ft, 5 ft and 6 ft, lengths from 50 ft to 328 ft, and graduated mesh that gets smaller toward the bottom on several listings. Match the height to the posts, the length to the fence line, and the mesh to the smallest animal that needs to stay inside.
Is 12-gauge or 14-gauge wire stronger for hog panels?
Lower gauge numbers mean thicker wire, so 12-gauge wire is thicker than 14-gauge wire. Listings show 12-gauge and 14-gauge wire, and a maker notes its 14-gauge wire is 23% thicker than standard 16-gauge fences. Check the gauge on each listing, since gauge, mesh and coating together decide how the fence holds up.
Do hog panels need a galvanized coating?
The listings used here describe galvanized coatings, often hot-dip galvanized, which the makers state resist rust and corrosion. Fence wire lives outside in rain and damp, so a stated galvanized coating is worth looking for on any listing. A maker states its fence holds tension for 10+ years.
Can hog panels be cut to fit a run?
Yes, panels and rolls can be cut to fit a fence line, and the how to cut cattle panel guide covers the cutting step. Measure the fence line, mark the cut, and check the mesh and gauge on the listing before ordering, so the piece that arrives fits the run as planned.
More coop guides
- How to Cut Cattle Panel for Chicken Runs
- Price of a Chicken Coop: What Affects Cost and Which to Buy
- Best Welded Wire Fence 5 Ft X 100 Ft (2026): 5 Rolls for Runs
- Cheap Chicken Wire: 5 Budget Picks for Runs and Coops (2026)
- Best Chicken Wire Run (2026): 5 Picks for Flocks and Gardens
- Chicken Run Size Calculator: How Much Space Do Chickens Need?
- Best Field Fence Post Caps (2026): 5 Picks for Wood, Vinyl and Chain Link
- Best Ground Anchors for Chicken Run (2026): Wind Picks
- Concrete vs Gravel Chicken Run: Which One Should You Buy?
- Best Fence to Keep Chickens Out of Garden (2026): 5 Picks for Beds and Borders
See the chicken runs and fencing guides and the price of a chicken coop guide.




