What Is a Fence Stretcher? Tool Guide
A fence stretcher is a tool that pulls sagging wire or mesh taut between posts so a chicken run fence stays tight and neat.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
The Original Texas Fence Fixer9.6/10View on Amazon - 2
Gtongoko Chain Link Fence Stretcher Tool9.6/10View on Amazon - 3
Krysolad 6 ft Woven Wire Fence Stretcher Bar9.5/10View on Amazon - 4
Thxoum 2-Pack Barbed Wire Pullers9.4/10View on Amazon
A run fence that sags after a storm lets hens push through gaps and gives predators an easy way in. A fence stretcher is a tool that grips wire or mesh and pulls it taut between posts so the fence stays tight, straight and hard to push aside. This guide explains what a fence stretcher is, the main types, how each type works and which pick fits a backyard run.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
| # | Product | Keeper Score | Buy |
|---|---|---|---|
| 1 | The Original Texas Fence Fixer | 9.6/10 | Buy on Amazon |
| 2 | Gtongoko Chain Link Fence Stretcher Tool | 9.6/10 | Buy on Amazon |
| 3 | Krysolad 6 ft Woven Wire Fence Stretcher Bar | 9.5/10 | Buy on Amazon |
| 4 | Thxoum 2-Pack Barbed Wire Pullers | 9.4/10 | Buy on Amazon |

The Original Texas Fence Fixer
A barbed wire stretcher and tightener made in the USA for barbed wire, electrical fence wire, horse fencing and net wire fencing, with a lifetime replacement term.
The Texas Fence Fixer is a barbed wire stretcher and tightener made in the USA. The maker says sixty seconds is all it needs to stretch and tighten a barbed wire fence. It works with barbed wire, electrical fence wire, horse fencing and net wire fencing, suits watergaps and short runs, and needs no staples or tie wires removed. The maker gives a lifetime replacement term, and the part number is TXFF.
Pros
- Works with barbed wire, electrical fence wire, horse fencing and net wire fencing
- Maker says sixty seconds is all it needs to stretch and tighten barbed wire
- No need to remove staples or tie wires before use
- Suits watergaps and short runs
Cons
- Suits short runs and watergaps, not a long boundary fence
- Made for wire fence, so chain link fabric needs a different tool
- The box holds 1 tool, so each wire needs its own pass
- Aimed at repair work, so a full new fence install is a bigger job than this tool fits

Gtongoko Chain Link Fence Stretcher Tool
A galvanized steel chain link fence stretcher with 5 hooks that spreads pulling force evenly, and it works with a come-along winch or ratchet puller.
Gtongoko lists a 31.5 in chain link fence stretcher with 5 hooks in galvanized steel. The hooks apply even pulling force during chain link fence installation, adjustment and maintenance, and the tool works with a come-along winch or ratchet puller. It fits chain link fabric, welded wire fencing and agricultural fence systems. The maker notes simple hook, pull and secure operation for small DIY fence jobs, and says to use proper support for longer fences or heavier mesh and to wear gloves for sharp wire edges.
Pros
- 5 hooks spread the pulling force evenly across the fabric
- Galvanized steel construction suits repeated outdoor use
- Works with a come-along winch or ratchet puller for controlled tension
- Fits chain link fabric, welded wire and farm fence systems
Cons
- No warranty term is stated
- Made for chain link and welded wire, not barbed wire strands
- A long fence or heavier mesh needs proper support, per the maker
- Sharp wire edges mean gloves are needed when handling the fabric

Krysolad 6 ft Woven Wire Fence Stretcher Bar
A 6 ft woven wire fence stretcher bar with 7 wedges and double-sided hooks that grips and straightens woven net during install and repair.
Krysolad lists a 6 ft woven wire fence stretcher bar with 7 wedges and double-sided hooks. The wedges sit in a staggered layout to give grip and stability and help straighten the woven net. The double-sided hooks give strong grip and stretching force for high-tension fence nets. The bar is high-quality steel with a rust-proof treated surface, made for long-term outdoor use in severe weather.
Pros
- 7 wedges grip the woven net and help straighten it
- Double-sided hooks give strong grip and stretching force
- High-quality steel with a rust-proof treated surface
- Suits farms, pastures and garden barriers as well as runs
Cons
- No warranty term is stated
- Made for woven wire net, so barbed wire strands need a different tool
- Fixed at 6 ft, so a wider panel needs the bar moved along
- Works a section at a time, so a long run takes repeat passes

Thxoum 2-Pack Barbed Wire Pullers
A pack of 2 cast barbed wire pullers that grip wire for splicing, stretching and repair, and each puller pairs with a come-along winch.
Thxoum lists a pack of 2 barbed wire pullers in high-quality cast, made for splicing, stretching and repairing high-tensile, barbed and fence wire. Each puller grips the wire to tighten sagging sections, and the maker says the sturdy design resists deformation and breakage. To use it, slip the wire into the top middle ring, attach a tensioning tool such as a come-along winch, and pull.
Pros
- 2 pullers in the pack, so a spare is on hand
- Grips high-tensile, barbed and fence wire for splicing, stretching and repair
- High-quality cast build resists deformation and breakage
- Pairs with a come-along winch and other fencing tools such as chains and hooks
Cons
- Needs a separate tensioning tool, such as a come-along winch, to pull
- Made for wire strands, so woven mesh and chain link fabric need a different tool
- The wire must be slipped into the top middle ring before each pull
- Each puller grips a wire at a time, so a wide run needs repeat work
What is a fence stretcher?
A fence stretcher is a hand tool for fence work. It grips a wire or a stretch of mesh, holds it firm and pulls it taut while the keeper fastens it to the posts or tightens it in place. Keepers reach for it when a new run goes up and when an old fence sags after wind or rain. Without tension, wire bows outward and gaps open at the posts.
Some stretchers work with a come-along winch or a ratchet puller, which supplies the steady pull while the stretcher holds the wire. The fence stretcher vs come-along guide explains which tool does which job, and the T-post fence calculator helps plan post spacing for a new run.
The main types of fence stretcher
Barbed wire grippers suit loose strands. The Texas Fence Fixer grips barbed wire and tightens it in place, and the Thxoum pullers (on Amazon) grip high-tensile, barbed and fence wire for splicing, stretching and repair. Woven wire bars suit mesh panels: the Krysolad bar (on Amazon) is 6 ft long with 7 wedges and double-sided hooks, so it holds a woven net straight while the keeper fixes it. Chain link pullers suit fabric: the Gtongoko stretcher (on Amazon) uses 5 hooks on a 31.5 in bar to spread the pull evenly, and it works with a come-along winch or ratchet puller.
How to use a fence stretcher
For a new fence, fasten the fence firm at the far end, then hook the stretcher onto the loose wire or mesh near the post that needs tension. Pull until the wire runs straight and the sag is gone, then fasten staples or ties while the tension holds. For a sagging section, grip the loose wire and tighten it in place instead. Release the pull and check the run from a few paces back. For longer fences or heavier mesh, use proper support, and wear gloves when handling sharp wire edges.
Fence stretcher picks for the run
A tight run fence starts with a grip that matches the wire, so these picks cover barbed wire strands, woven wire net and chain link fabric.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What is a fence stretcher used for?
It pulls fence wire or mesh taut between posts when a fence goes up or a sagging section needs repair. A taut fence keeps hens in and closes gaps at the posts.
Do I need a come-along with a fence stretcher?
It depends on the tool. The Gtongoko and Thxoum stretchers pair with a come-along winch or ratchet puller, while a hand gripper such as the Texas Fence Fixer pulls by hand. Check the maker notes before ordering.
Can a fence stretcher fix a sagging run fence?
Yes, for sagging wire sections. Grip the loose wire, pull it taut and fasten it while the tension holds. For longer fences or heavier mesh, use proper support and wear gloves.
What kind of fence stretcher fits woven wire?
A bar with wedges fits woven wire. The Krysolad bar is 6 ft long with 7 wedges and double-sided hooks, and it holds the net straight while it is fixed.
Can I stretch a fence without removing the staples?
Yes, with the right tool. The maker of the Texas Fence Fixer says there is no need to remove staples or tie wires.
More coop guides
- Fence Stretcher vs Come Along: Which One Should You Buy?
- How to Tie T Post Clips for a Sturdy Chicken Run
- T Post Fence Calculator: How Many Posts Your Fence Needs
- Chicken Run Ideas: Layouts, Netting and Fencing
- How to Keep a Chicken Run Clean
- Chicken Run Set Up: A Step-by-Step Guide
See the chicken run and fencing picks and the coop supply guides.




