Gate Hinge Types Compared
Gate hinge types for a chicken run gate: T hinges, self-closing hinges and wall mount pin hinges, sized by stated hinge size, gap and pin.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SANKINS Self Closing Gate Hinges9.5/10View on Amazon - 2
WENHUALI 2 Pack Wall Mount Gate Hinges with 5/89.5/10View on Amazon - 3
HLMOptimo Heavy Duty T Hinge, 4 Inch, 6 Pcs, Black9.4/10View on Amazon
Morning let-out is the same routine every day: unlatch the run gate, let the flock out to scratch, and latch it again behind them. When the gate drags, sags or will not stay shut, the hinge is often the part to check. T hinges carry shed and fence gates, self-closing hinges shut the gate behind you, and wall mount pin hinges hang gates on posts and chain link.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
| # | Product | Keeper Score | Buy |
|---|---|---|---|
| 1 | SANKINS Self Closing Gate Hinges | 9.5/10 | Buy on Amazon |
| 2 | WENHUALI 2 Pack Wall Mount Gate Hinges with 5/8 | 9.5/10 | Buy on Amazon |
| 3 | HLMOptimo Heavy Duty T Hinge, 4 Inch, 6 Pcs, Black | 9.4/10 | Buy on Amazon |

SANKINS Self Closing Gate Hinges
A self-closing gate hinge with spring tension and an adjustable gap from 0.23 to 1.25 inches, made from galvanized steel with a black powder coating.
Who it's for: a run gate that must shut on its own, with a fitting gap.
Who should skip it: a gate with no room for the minimum gap, or a wooden fence with no screws on hand.
The SANKINS listing states a self-closing hinge with spring tension, a 90 degree adjustment, and a gap that adjusts from 0.23 to 1.25 inches, with a swing adjuster tool. It lists galvanized steel with a black powder coating and 1 inch self-tapping metal screws for vinyl fences, while wood screws are not included. The spec table reads Black(1pcs) for color, which does not match the 2-piece pack in the title, so trust the title for the pack size.
Pros
- Self-closing with spring tension and a swing adjuster tool included
- Gap adjusts from 0.23 to 1.25 inches between gate post and frame
- Galvanized steel with black powder coating for outdoor use
- Includes 1 inch self-tapping metal screws for vinyl fences
Cons
- Wood screws are not included, so wooden fences need their own
- Needs at least a 0.23 inch gap to install, so tight gates may not fit
- No warranty term is stated
- No load capacity is stated for the gate weight it holds

WENHUALI 2 Pack Wall Mount Gate Hinges with 5/8
A wall mount gate hinge with a 5/8-inch pin and screws included, made from galvanized steel for fence posts, farm gates and chain link gates.
Who it's for: a gate hung on a post or chain link frame, where the gate lifts off the pin.
Who should skip it: a gate that must close on its own, or a frame that takes another pin.
The WENHUALI listing states a 2 pack of wall mount gate hinges with 5/8-inch pins and screws included, made from galvanized steel for fence posts, farm gates and chain link gates. The hinge measures 5.0 x 1.5 x 0.1 inches, and the maker says the pin fits most gate frames.
Pros
- 5/8-inch pin fits most gate frames, as the listing states
- Galvanized steel resists rust and corrosion outdoors
- Screws included, and no special tools are needed
- Wall mount suits fence posts, farm gates and chain link gates
Cons
- No warranty term is stated
- No load capacity is stated for the gate weight it holds
- Pin size is fixed at 5/8 inch, so other frames need a different hinge
- No self-closing action is stated, so this hinge will not shut the gate for you.

HLMOptimo Heavy Duty T Hinge, 4 Inch, 6 Pcs, Black
A 4 inch T hinge sold as a 6-piece set, with counterbore holes for M4 self-tapping screws and a rustproof spray treatment.
Who it's for: a shed, barn or fence gate where a 6-piece set covers the job.
Who should skip it: a gate where a stated load capacity for the 4 inch hinge is needed.
The HLMOptimo listing states a 4 inch T hinge in a 6-piece set, with counterbore holes for M4 self-tapping screws and solid, internally polished bearings. Two figures do not line up: the load capacity of 50 kg, or 110 lb, per hinge is stated for 3 x 12 inch T hinges, not this 4 inch size, and the spec table lists 2.0 x 2.0 x 0.1 inches against the 4 inch size in the title. Trust the title for the size.
Pros
- Six hinges in the pack, so a gate and a shed door can share a set
- Counterbore holes suit M4 self-tapping screws for a flat surface
- Solid bearings, internally polished, which the maker says run silent and smooth
- Rustproof and anti-corrosion spray treatment for outdoor and indoor use
Cons
- Load capacity of 50 kg / 110 lb is stated for 3 x 12 inch T hinges, not this 4 inch size
- No warranty term is stated
- No screws are listed as included
Gate hinge types: the short answer
Start with what the gate has to do. A T hinge suits a shed, barn or fence gate that swings on a flat face, and the HLMOptimo listing sells its 4 inch T hinge as a 6-piece set for barns, fences, sheds and gates. A self-closing hinge suits a run gate that must shut behind you, and the SANKINS listing adds spring tension with a swing adjuster tool and a gap that adjusts from 0.23 to 1.25 inches. A wall mount pin hinge suits a gate hung on a post or a chain link frame, and the WENHUALI listing gives a 5/8-inch pin with screws included. Pick the type by the gate, then check the size, gap and pin. See our types of fence gates guide.
Hinge types compared
| Type | Example listing | Stated size | What it handles |
|---|---|---|---|
| T hinge | HLMOptimo 4 in T Hinge | 4 in, 6 pcs | Shed, barn and fence gates |
| Self-closing | SANKINS Self Closing Hinge | 3.5 x 3.54 in, 2 pcs | Gates that must shut on their own |
| Wall mount pin | WENHUALI 5/8 in Pin Hinge | 5.0 x 1.5 x 0.1 in, 2 pack | Posts and chain link gates |
The table names the type by its job. A T hinge spreads the load across the gate face, and the HLMOptimo listing gives a 4 inch T hinge for barns, fences, sheds and gates. A self-closing hinge carries a spring that pulls the gate shut, and the SANKINS listing gives spring tension with a swing adjuster tool and a gap that adjusts from 0.23 to 1.25 inches. A wall mount pin hinge hangs the gate on a pin fixed to the post, and the WENHUALI listing gives a 5/8-inch pin.
The gear
The hinge has to match the gate in size, gap and pin.
Measuring the gap and the gate
Measure before you order, and use the figures the listings state. The SANKINS hinge needs a gap of at least 0.23 inch between the gate post and the gate frame, and it adjusts out to 1.25 inches, so measure the gap you have. The WENHUALI hinge needs a frame that takes a 5/8-inch pin, so check the frame and post. The HLMOptimo T hinge (on Amazon) is 4 inches, so check the gate face has room for the strap. See our chain link fence gates sizes guide.
Fitting the hinge and keeping the gate square
Hang the gate and check the swing before you drive every screw. The SANKINS listing includes 1 inch self-tapping metal screws for vinyl fences and says wooden fences need wood screws, which are not included. The HLMOptimo hinge has counterbore holes for M4 self-tapping screws, which leave a flat surface after installation. The WENHUALI hinge ships with screws included and needs no special tools. After fitting, open the gate and let it close to check that it shuts square. A gate that drags or binds may have a hinge out of line or a gap set wrong, so loosen the screws, check the alignment and the gap, and try again. See our how to predator proof a chicken run guide.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What hinge types suit a chicken run gate?
T hinges suit shed, barn and fence gates, self-closing hinges suit a run gate that must shut behind you, and wall mount pin hinges suit gates hung on posts and chain link frames. Match the type to the gate first.
How much gap does a self-closing hinge need?
The SANKINS hinge adjusts from 0.23 to 1.25 inches between the gate post and the gate frame, and the listing says to leave at least a 0.23 inch gap.
What size pin fits a chain link gate?
The WENHUALI hinge in this guide uses a 5/8-inch pin, which the maker says fits most gate frames. Measure the frame before ordering, since the pin size is fixed.
How much weight does a 4 inch T hinge hold?
The HLMOptimo listing states 50 kg, or 110 lb, per hinge, but ties that figure to 3 x 12 inch T hinges, not the 4 inch size in this guide. The 4 inch hinge has no stated load capacity here, so check with the maker for your gate weight.
More coop guides
- Types of Fence Gates for Chicken Runs
- Chain Link Fence Gates Sizes: Dimensions Chart
- How to Predator Proof a Chicken Run
- Chicken Run Set Up: A Step-by-Step Guide
- Best Fence Brace Kit (2026)
- Manual Chicken Coop Door: Types and What to Buy
See every chicken runs and fencing guide and our chicken run set up guide.




