Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Post Hole Auger vs Post Hole Digger: Which One Should You Buy?

A gas auger, a hand auger, a hand digger and a gas digger compared on hole size, length, weight and warranty.

Post Hole Auger vs Post Hole Digger: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Earthquake E43 1-Person Earth Auger PowerheadEarthquake E43 1-Person Earth Auger Powerhead9.6/10View on Amazon
  2. 2PRIJESSE 72cc Gas Post Hole DiggerPRIJESSE 72cc Gas Post Hole Digger9.6/10View on Amazon
  3. 3VNIMTI Post Hole Digger with Fiberglass HandleVNIMTI Post Hole Digger with Fiberglass Handle9.5/10View on Amazon
  4. 4Seymour S500 Industrial IWAN Auger, 6 in DiameterSeymour S500 Industrial IWAN Auger, 6 in Diameter9.4/10View on Amazon

Post hole auger vs post hole digger verdict: Choose a post hole auger for boring round holes, by hand for a few posts or with gas for a long run. Choose a post hole digger for a simple hand tool, or a gas digger with 3 bit sizes.

A new run means fence posts, and fence posts mean holes in ground that has not been turned in years. This post hole auger vs post hole digger comparison looks at each tool, with two examples of each side from the listings we reviewed.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

The examples

Earthquake E43 1-Person Earth Auger Powerhead

Earthquake E43 1-Person Earth Auger Powerhead

EARTHQUAKE9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 43cc 2-cycle gas powerhead with an 8 inch steel auger, 36 inches long, and a 5 year limited warranty.

Who it's for: a keeper fencing a long run who wants gas power and a replaceable-blade auger.

Who should skip it: anyone who wants a hand tool or a choice of bit sizes.

The Earthquake E43 is a 1-person earth auger powerhead with a 43cc 2-cycle Viper engine and a 30:1 transmission. The maker lists industrial air filtration, steel welded handlebars, ball bearings and alloy gears, and anti-vibration foam-grip handles. The included 8 inch steel auger has a fishtail point and replaceable blades, and at 36 inches long it lets you drill standing upright. It weighs 34.0 lb and carries a 5 year limited warranty.

Pros

  • 43cc 2-cycle Viper engine with a 30:1 transmission
  • Included 8 inch steel auger with fishtail point and replaceable blades
  • 36 inch auger lets you drill standing upright
  • 5 year limited warranty

Cons

  • 34.0 lb powerhead is heavy to carry
  • Reach stops at the 36 inch auger
  • Only the 8 inch bit size is stated
  • Gas engine adds fuel and upkeep
PRIJESSE 72cc Gas Post Hole Digger

PRIJESSE 72cc Gas Post Hole Digger

PRIJESSE9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 72cc gas post hole digger with 4, 8 and 12 inch drill bits and 2 extension rods of 24 inches.

Who it's for: a keeper who wants 3 hole sizes and extra reach for a long fence line.

Who should skip it: anyone who wants a stated weight or warranty term.

The PRIJESSE is a 72cc gas post hole digger with a 2-stroke petrol engine, handled by one or two people. It comes with 4, 8 and 12 inch earth auger drill bits and 2 extension rods of 24 inches, plus a finger throttle on the handlebar and two anti-skid vibration-proof grips. The maker lists fence posts, poles, trees and shrubs as uses.

Pros

  • 72cc gasoline engine for fence posts, poles, trees and shrubs
  • 3 drill bits: 4, 8 and 12 inches
  • 2 extension rods of 24 inches for extra reach
  • One or two people can handle it, with anti-skid vibration-proof grips

Cons

  • Screws must be tightened after receiving the goods, before use
  • No warranty term is stated
  • Gas engine adds fuel and upkeep
  • 3 bits and 2 rods to store
VNIMTI Post Hole Digger with Fiberglass Handle

VNIMTI Post Hole Digger with Fiberglass Handle

VNIMTI9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 58 inch post hole digger with heavy-duty steel blades and a thickened fiberglass handle, weighing 9.6 lb.

Who it's for: a keeper who wants a simple hand digger for a few fence posts.

Who should skip it: anyone who wants gas power or a stated warranty term.

The VNIMTI is a 58 inch post hole digger with heavy-duty steel blades and a thickened fiberglass handle. The maker lists sharp, impact-resistant blades for hard soil and rooted soil, a non-slip grip, and double-reinforced joints where the steel head meets the handle. It weighs 9.6 lb and suits post holes, mailboxes, fencing and gardening.

Pros

  • 58 inch overall length for adult use
  • Heavy-duty steel blades dig hard soil and cut rooted soil
  • Thickened fiberglass handle with a non-slip grip
  • Double-reinforced joints where head meets handle

Cons

  • Hand power only, so hard soil means hard work
  • 58 inch length needs long storage
  • Orange is the only color stated
  • 9.6 lb, heavier than the 7.4 lb Seymour auger
Seymour S500 Industrial IWAN Auger, 6 in Diameter

Seymour S500 Industrial IWAN Auger, 6 in Diameter

Seymour9.4/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch hand auger with a steel blade riveted to an iron yoke and a steel T-handle, weighing 7.4 lb.

Who it's for: a keeper who wants a simple hand auger for a few fence posts.

Who should skip it: anyone who wants gas power, a choice of sizes or a stated warranty term.

The Seymour S500 is a hand auger with a 6 inch diameter, a steel blade riveted to an iron yoke and a steel shaft with a welded steel T-handle. The maker gives two handle materials, hardwood and steel; check before ordering. It is made for general purpose use in a variety of soils and weighs 7.4 lb.

Pros

  • 6 inch diameter for general purpose use in a variety of soils
  • Steel blade riveted to a tough pliable iron yoke
  • Steel shaft with a welded steel T-handle
  • 7.4 lb, light to carry

Cons

  • Hand power only, so many holes are slow work
  • Only the 6 inch size is stated
  • No warranty term is stated
  • Riveted blade is fixed and cannot be swapped

Other options for the coop

Post hole auger vs post hole digger: side by side

Factor Post hole auger Post hole digger Notes
How it works Screw blade bores and lifts soil Hand digger: two blades close and lift soil out; gas digger drills with bits Core
Power Hand power, or 43cc gas Hand power, or 72cc gas Both
Hole sizes stated 6 in and 8 in 4, 8 and 12 in More sizes
Weight stated 7.4 lb and 34.0 lb 9.6 lb; gas not stated Auger only
Length stated 36 in auger 58 in overall; 2 rods of 24 in Length
Warranty stated 5 Year Limited Not stated Auger only

These figures are the coop makers’ own ratings, read from each listing on 15 November 2026.

How each tool digs

An auger bores: its screw blade turns into the ground and lifts soil up as it goes, so the hole stays round. The hand digger works differently: two blades close around a bite of soil, and you lift the tool to carry that bite out. The gas digger drills instead: the PRIJESSE comes with 4, 8 and 12 inch drill bits.

Hand power or gas

The Seymour auger and the VNIMTI digger are hand tools, the Seymour with a steel T-handle and the VNIMTI with a 58 inch fiberglass handle. The Earthquake auger runs on a 43cc 2-cycle Viper engine, and the PRIJESSE digger runs on a 72cc gasoline engine. The Earthquake is a 1-person powerhead, and the PRIJESSE can be handled by one or two people. The Seymour weighs 7.4 lb and the VNIMTI weighs 9.6 lb, while the Earthquake powerhead weighs 34.0 lb and the PRIJESSE gives no weight.

Hole size and length

The auger side states two hole sizes: the Seymour cuts a 6 inch hole and the Earthquake bit is 8 inches. The digger side states 4, 8 and 12 inch bits on the PRIJESSE, while the VNIMTI gives no hole diameter. For length, the Earthquake auger bit is 36 inches long, the VNIMTI digger is 58 inches overall, and the PRIJESSE adds 2 extension rods of 24 inches. Our what size auger for fence posts guide covers bit choice.

Flock fit

Earthquake E43 Earth Auger

Flock size1-34-67-1213-2525+

PRIJESSE 72cc Post Hole Digger

Flock size1-34-67-1213-2525+

VNIMTI 58 in Post Hole Digger

Flock size1-34-67-1213-2525+

Seymour 6 in IWAN Auger

Flock size1-34-67-1213-2525+

FAQ for the flock

Can I dig fence post holes with a hand auger?

Yes, for a few holes. The Seymour is a 6 inch hand auger made for general purpose use in a variety of soils, with a steel blade and a steel T-handle.

What hole sizes do these tools make?

The Seymour cuts a 6 inch hole and the Earthquake bit is 8 inches. The PRIJESSE comes with 4, 8 and 12 inch bits, while the VNIMTI gives no hole diameter.

Can one person run a gas earth auger?

Yes. The Earthquake is a 1-person powerhead, and the PRIJESSE can be handled by one or two people. Both put a throttle control at the handles.

How long are these tools?

The Earthquake auger bit is 36 inches long, the VNIMTI digger is 58 inches overall, and the PRIJESSE adds 2 extension rods of 24 inches. The Seymour gives no overall length.

How the Coop Score came out

Each example is scored on performance, build, value, safety and warranty, using only what the listing publishes. The weights are on our How We Pick page.

Product Keeper Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Earthquake E43 Earth Auger 9.6 30 21 20 4 3
PRIJESSE 72cc Post Hole Digger 9.6 32 20 20 4 0
VNIMTI 58 in Post Hole Digger 9.5 29 21 21 3 0
Seymour 6 in IWAN Auger 9.4 28 20 20 0 0

Lower point totals read near 9.2 and the strongest near 9.8; because the conversion is proportional, rank by points equals rank by score.

Which should you choose?

Choose a post hole auger if you want round holes bored by hand for a few posts with the 6 inch Seymour, or with gas power for a long run with the 43cc Earthquake.

Choose a post hole digger if you want a simple hand tool, like the 58 inch VNIMTI, or a gas digger with 4, 8 and 12 inch bits, like the 72cc PRIJESSE.

Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

More coop guides

See every chicken runs and fencing guide and all chicken coops guides.

More buying guides

Chicken Runs and Fencing ·

Types of Post Hole Diggers for Fencing

Clamshell, hand auger and powered auger compared for a chicken run fence, with advice on rocky ground and choosing the right digger.

Chicken Runs and Fencing ·

Best Post Hole Digger for Hard Ground (2026)

Five post hole diggers compared for hard ground, from a 72CC gas auger with three bit sizes to manual diggers with sharp carbon steel…