How to Tie T Post Clips for a Sturdy Chicken Run
Seat the wire in the post notch, hook the clip around wire and post, twist the ends tight, and check the hold before moving to the next post.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
1000pcs T-Post Fence Clips with 2 Wire Twister9.6/10View on Amazon - 2
Tatuo 1000 Pcs T Post Clips Bulk Galvanized Steel9.6/10View on Amazon - 3
300pcs T-Post Clips Fence Wire Clips Galvanized9.5/10View on Amazon - 4
ZENFUN 250 Pcs T-Post Wire Clip Galvanized Steel9.5/10View on Amazon
A run fence that sags at the posts starts as a small problem and grows a little each week. The wire pulls away from the post, the gap at the bottom grows, and the flock ends up out in the garden instead of in the run. Learning how to tie t post clips is the small repair that holds the fence line together, and it takes clips, pliers and a walk along the posts.
This guide shows the steps in order, the clips to use for a chicken run, the mistakes that loosen a fence, and a short check to run when the work is done.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

1000pcs T-Post Fence Clips with 2 Wire Twister
1000 galvanized steel T-post clips with 2 wire twister tensioners, sized for T-post, U-post, Y-post and round posts.
Who it's for: a keeper fencing a long run who wants the twisters in the same pack.
Who should skip it: anyone with a short repair, where a 1000-clip pack is more than the job needs.
BEIYI lists 1000 clips with 2 wire twister tensioners, galvanized steel, and a stated clip size of 2.95 x 1.77 x 0.59 inches. The maker lists T-post, U-post, Y-post and round posts, and names pastures, gardens and netting among the uses. The twisters handle the tightening step.
Pros
- 1000 clips with 2 wire twister tensioners in the pack
- Fits T-post, U-post, Y-post and round posts
- Galvanized steel stated for rust and corrosion resistance
- Clip size stated at 2.95 x 1.77 x 0.59 inches
Cons
- A 1000-clip pack is more than a short run repair needs
- The 2 twister tensioners are extra tools to store between jobs
- Pre-shaped clips fit the listed post shapes only
- A bulk pack takes more storage space than a small pack

Tatuo 1000 Pcs T Post Clips Bulk Galvanized Steel
1000 heavy-duty 9 gauge galvanized steel T-post clips for securing wire to posts in garden, farm, highway and sport fences.
Who it's for: a keeper who wants a bulk pack of 9 gauge clips for a long fence line.
Who should skip it: anyone who wants a twister tool in the pack.
Tatuo lists 1000 clips in heavy-duty 9 gauge galvanized steel, with a stated clip size of 2.95 x 1.77 x 0.59 inches. The maker gives 2 sizes, 2.95 x 1.77 x 0.59 inches and 2.76 x 2.17 x 1.65 inches; check before ordering. The maker states the clips are reusable and suit garden, farm, highway and sport fences. The clips handle the tying step on the post.
Pros
- 1000 clips in the pack for long fence lines and replacements
- Heavy-duty 9 gauge galvanized steel stated
- Reusable clips stated for long-term use
- Clip size stated at 2.95 x 1.77 x 0.59 inches
Cons
- A 1000-clip pack is more than a small repair needs
- No twister tool is included in the pack
- The pack holds clips only, so other fasteners need a separate purchase
- No warranty term is stated

300pcs T-Post Clips Fence Wire Clips Galvanized
300 heavy-duty 9 gauge galvanized steel T-post clips, pre-cut and pre-shaped for chicken wire and welded mesh on posts up to 1.33 lb/ft.
Who it's for: a keeper securing chicken wire or welded mesh to a run fence who wants a mid-size pack.
Who should skip it: anyone fencing a long line, where 300 clips may run short.
Hoqqf lists 300 clips in heavy-duty 9 gauge galvanized steel, pre-cut and pre-shaped for T-posts and U-posts up to 1.33 lb/ft. The maker states the clips secure chicken wire and welded wire mesh and help reduce wire shifting and sagging. The galvanized finish is stated to help resist rust and corrosion.
Pros
- Heavy-duty 9 gauge galvanized steel stated
- 300 clips for small to medium fencing projects
- Pre-cut and pre-shaped for quick positioning on T-posts and U-posts
- Stated fit for posts up to 1.33 lb/ft
Cons
- A 300-clip pack covers a shorter run than the 1000-clip packs
- No twister tool is included in the pack
- The stated fit covers posts up to 1.33 lb/ft, so heavier posts are outside the stated fit
- Pre-shaped clips fit T-posts and U-posts only

ZENFUN 250 Pcs T-Post Wire Clip Galvanized Steel
250 galvanized steel wire T-post clips, pre-cut and pre-twisted for securing wire to T-posts.
Who it's for: a keeper who wants a small pack for repairs and replacements.
Who should skip it: anyone fencing a long run, where 250 clips may run short.
ZENFUN lists 250 clips in galvanized steel wire, pre-cut and pre-twisted to a specific shape for T-posts. The maker states a bright, smooth surface with no burrs, and that the clips can be reused for a long time.
Pros
- 250 clips for daily use and replacement
- Galvanized steel wire, bright and smooth with no burrs stated
- Pre-cut and pre-twisted to a specific shape for T-posts
- Reusable for a long time, as the maker states
Cons
- A 250-clip pack is the smallest here, so a long fence line needs an extra pack
- No twister tool is included in the pack
- The clips suit the listed fence types only
- No warranty term is stated
How to tie t post clips: the short answer
Hook the clip around the fence wire and the post, then twist the ends together until the clip grips the wire and the post. Seat the wire in the post notch before you clip it, work from the top wire down, and give each clip a tug when it is tied to check the hold. A clip that moves needs another twist.
What you need before you start
Walk the fence line with clips and pliers in hand, and look for wires that have slipped out of the post notch, clips that have rusted through, and posts that lean. The clips in this guide are galvanized steel, which the makers state helps resist rust and corrosion outdoors. The chicken wire ties guide compares ties, and the T post vs wood post guide helps when a post itself needs replacing.
How to tie t post clips step by step
Start at a corner post and work along the line. The steps below use the clips in this guide on T-posts; the Hoqqf clips (on Amazon) are also stated for U-posts up to 1.33 lb/ft and for chicken wire and welded wire mesh.
- Seat the fence wire in the notch on the post so the wire sits tight against the post.
- Hook the clip around the wire and the post, with the ends of the clip on the outside of the wire.
- Twist the ends together with pliers until the clip grips the wire and the post.
- Tug the wire near the clip to check the hold, and twist again when the clip moves.
- Move to the next wire on the same post, then to the next post.
The clips for a chicken run
The twist step needs a clip that wraps the wire and the post and holds after the twist. The packs below run from 250 to 1000 clips: a small pack suits repairs, while a bulk pack suits a long fence line.
Common mistakes to avoid
A loose fence usually comes from a small slip in the steps. The mistakes below are the ones to watch for on a run fence.
- Clipping the wire without seating it in the post notch, so the wire slides down the post.
- Leaving the clip ends loose, so the clip can work free when the flock leans on the fence.
- Using a clip on a post shape outside the stated fit, so the clip cannot grip.
- Skipping the tug check, so a loose clip goes unnoticed until the wire sags.
Check the fence line when you finish
Walk the line again and tug each wire near its clips, looking for clips that have slipped, wires outside the notch, and posts that lean. The how many T post clips per post guide helps when a post needs more clips, and the T post fence calculator helps plan posts for a new fence line. Replace any clip that no longer holds.
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
How many T post clips does a post need?
Clip each wire where it meets the post, with a clip at the top wire and the bottom wire so the mesh stays fastened along the post.
Can T post clips be reused?
2 of the clips in this guide are stated as reusable: the ZENFUN and Tatuo clips (on Amazon). Replace a clip that is bent out of shape or no longer grips.
Do T post clips work on U-posts?
Some do. The Hoqqf clips are stated for T-posts and U-posts up to 1.33 lb/ft, and the BEIYI clips (on Amazon) are stated for T-post, U-post, Y-post and round posts.
What wire do T post clips fasten?
Chicken wire and welded wire mesh are the stated uses for the Hoqqf clips, and the other clips in this guide are stated for garden, farm, highway and sport fences.
What stops clips from slipping on the post?
Seat the wire in the post notch, hook the clip around the wire and the post, and twist the ends tight so the clip grips. A clip that still slips needs a tighter twist or a fresh clip.
More coop guides
- How Many T Post Clips Per Post
- T Post vs Wood Post: Which One Should You Buy?
- Manual T Post Driver: How to Choose and Use One
- Best Chicken Wire Ties (2026): 5 Coop and Run Picks
- Cable Ties vs Chicken Wire Ties: Which One Should You Buy?
- Chicken Run Set Up: A Step-by-Step Guide
- T Post Fence Calculator: How Many Posts Your Fence Needs
- Step-in vs T-post for Poultry Netting: Which One Should You Buy?
- Best Metal T Post Puller (2026): 5 Fence Line Picks
See the chicken runs and fencing picks and the chicken run set up guide for the rest of the fence line.




