What Size T Post for 5 Ft Fence
A 5 ft fence needs a T post that stands above the wire, holds the clips firm, and stays straight through wind and weather.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Gtongoko 10 Pack 5FT Metal Fence Posts9.7/10View on Amazon - 2
FOREHOGAR Green Metal Fence Post 4.8 Feet9.6/10View on Amazon - 3
Toriexon Metal Fence Posts 6 FT9.6/10View on Amazon - 4
ZENFUN 250 Pcs T-Post Wire Clip Galvanized Steel Fence ClipsView on Amazon - 5
VEVOR 6 ft Fence PostView on Amazon - 6
1 Pack 24 Inch Black Fence Post Driver with Handle 34LB IronView on Amazon - 7
Metal Fence Posts Heavy Duty U-Post Stakes for Wire FencingView on Amazon - 8
Metal Garden Fence PostsView on Amazon - 9
Zareba Standard T-Post Insulators for Electric FenceView on Amazon
Morning chores start at the run, and the fence is the first thing you look at. A loose wire sags, a leaning post lets the whole line drift, and the flock finds the gap before you do. Knowing what size t post for 5 ft fence you need keeps that morning round short: pick a post that stands above the wire, holds the clips firm, and stays straight once it is in the ground.
Other options for the coop
ZENFUN 250 Pcs T-Post Wire Clip Galvanized Steel Fence ClipsCheck price on Amazon
VEVOR 6 ft Fence PostCheck price on Amazon
1 Pack 24 Inch Black Fence Post Driver with Handle 34LB IronCheck price on Amazon
Metal Fence Posts Heavy Duty U-Post Stakes for Wire FencingCheck price on Amazon
Metal Garden Fence PostsCheck price on Amazon
Zareba Standard T-Post Insulators for Electric FenceCheck price on Amazon
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
What size t post for 5 ft fence: match the post to the wire
A T post for a 5 ft fence has one job above all: stand tall enough that the top of the wire fastens to the post, not above it. When the wire reaches near the top of the post, the clips hold it at the height where the fence does its work, and the post still has room in the ground to hold firm. A post that ends below the top wire leaves the wire with nothing to clip to, and the fence sags at the very place the flock pushes against it.
The post has a part you see and a part in the ground. The part you see carries the wire. The part in the ground keeps the post upright when wind pulls at the wire and when the flock leans on the line. A post with too little in the ground leans after a hard rain, and a leaning post pulls the wire out of line along the whole run. Set each post deep in firm ground and check it with a level eye from along the line before you clip the wire.
How a T post holds the wire
The T shape is the whole idea. The flat side faces the wire, the ridge at the back gives the post its stiffness, and the studs along the face give the clips a place to bite. Galvanized steel clips wrap around the post and the wire, and the listing states they come pre-cut and pre-twisted to a set shape, so each clip goes on the same way along the line. The maker lists the clips as rust resistant, with a bright and smooth surface, and states they can be reused for a long time.
One pack holds 250 clips. That count matters when you plan the line, because every place the wire meets a post takes a clip. Count the posts, count the wires on each post, and make sure the pack covers the line with clips left over for repairs. The listing states the clips suit wire fences for garden, farm, highway and sport use, and the same galvanized steel build fits a chicken run.
Setting posts that stay straight
Drive the post straight and check it as you go. A post driver made for T posts keeps the top from bending and lets you work down the line at a steady pace. The post driver guide walks through the tool, and the manual T post driver guide covers the hand tool version. When the ground is hard, a driver made for rocky ground helps; see the post driver for rocky ground picks.
Depth matters more than force. A post set shallow will lean, and no clip can fix a leaning post. The guide to post depth explains how to set run posts that stay straight, and it is worth reading before you start the line. Keep the line taut as you go, clip the wire at each post, and sight along the top of the wire when you finish: a straight line at the top shows the wire runs true.
Corners, gates and ends need more
Line posts carry the wire. Corner posts, gate posts and end posts carry the pull of the whole line, so they need a sturdier setup. A brace kit ties the corner post to the next post and keeps the corner from leaning in under tension; see the fence brace kit picks. Gates need a post that can carry the gate and the wire together, and the fence gate types guide shows the styles that fit a run. Plan the corners and the gate first, then fill in the line posts between them.
Clips, wire and the top of the fence
The wire is only as good as its clips. Galvanized steel clips resist rust, and the ZENFUN listing states a pack of 250 pre-cut clips, shaped to fit T posts. Clip the wire at each stud where it crosses the post, and put a clip at the top wire first so the fence hangs at the right height while you work down. If a clip bends or the wire slips, swap in a fresh clip from the pack rather than leaving a loose spot for the flock to find.
Wire choice matters too. Welded wire and woven wire suit a run, and the wire fence types guide compares them. The fence post types guide compares post materials, and the T post vs wood post comparison helps when you are choosing between steel and wood for the line.
A short checklist before you buy
- Posts stand above the top wire of a 5 ft fence
- Clips are galvanized steel and shaped for T posts
- 250 clips counted against posts and wires, with spares for repairs
- Corner and gate posts have a brace plan
- Local rules checked before you set posts
- Wire type picked for the run before the posts go in
Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What size T post do I need for a 5 ft fence?
Pick a post that stands above the top wire of the 5 ft fence, with enough post in the ground to stay straight. The wire should clip to the post near the top, and the post should still stand firm when the wire pulls at it.
How many clips come in a pack?
The ZENFUN listing states 250 clips per pack. The clips are pre-cut and pre-twisted galvanized steel, shaped to fit T posts.
How do T post clips hold the wire?
Each clip wraps around the post and the wire at a stud on the post face. The listing states the clips are pre-cut and pre-twisted to a set shape, so they fasten the wire to the post and keep it from slipping.
Do corners and gates need different posts?
Corners, gates and end posts carry the pull of the whole line, so they need a sturdier setup than line posts. A brace kit ties the corner post to the next post, and a gate post must carry the gate as well as the wire.
What should I check before setting posts?
Check local, HOA and state rules for fence height and placement, and call before you dig so buried lines are marked. A quick check now saves a rebuild later.
More coop guides
- What Size T Post for 4 Foot Fence
- How Many Fence Post Do I Need for the Run
- How Deep Post for Fence: Setting Run Posts That Stay Straight
- Types of Fence Posts: Materials Compared
- T Post vs Wood Post: Which One Should You Buy?
- How to Use a Post Driver for Fence Posts
- Manual T Post Driver: How to Choose and Use One
- Best T Fence Posts (2026): 5 Picks Compared
See the fence post guides and the predator proof run guide.




