Chicken Egg Incubation Chart: Day-by-Day Stages and Guide
A practical day-by-day reference for backyard keepers covering incubator temperature, humidity settings, egg turning intervals and lockdown timing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
QVKHPCL 26-egg chicken incubator9.6/10View on Amazon - 2
DEZHXHE 32-egg quail incubator9.6/10View on Amazon - 3
Chickcozy 25 Egg Incubator with Humidity Control and Egg9.5/10View on Amazon
Setting a clutch of eggs in an incubator brings steady excitement to backyard chicken keeping, whether you are refreshing a flock or expanding your coop. A clear chicken egg incubation chart helps keepers track the essential milestones from setting clean eggs to hatch day: maintaining stable warmth, managing humidity levels, turning eggs regularly to keep embryos developing freely, and entering lockdown so chicks can pip and hatch safely.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
Chicken egg incubation chart: stages from setting to hatch
Incubation divides naturally into distinct periods: initial setting, active growth with regular turning, candling verification, and final lockdown. During the early and middle stages, the incubator maintains continuous warmth, controlled humidity, and steady turning so embryos do not settle against the inner shell membrane. As hatch day approaches, turning ceases and humidity rises to support pipping.
The reference chart below outlines the sequence of stages, required conditions, and key keeper chores throughout incubation:
| Stage | Incubation Phase | Turning Action | Humidity and Airflow |
|---|---|---|---|
| Setting Phase | Egg placement and warming | Turn every 2 hours (WONEGG) or at selectable intervals of 60, 90, 120, 150, or 210 minutes (ShellBr8ker, GleeGearNex) | Maintain moderate humidity with vents set to conserve moisture |
| Active Growth Phase | Embryo development and candling | Continue regular automatic turning | Maintain steady humidity; use external water ports (Syluris dual 200ml and 400ml inlets) and vent switches to fine-tune levels |
| Lockdown Phase | Pre-hatch preparation | Halt turning on the 18th day (Syluris), final 3 days (GleeGearNex, WONEGG), or final 4 days (ShellBr8ker) | Increase humidity by filling reservoirs; open vents to provide oxygen for pipping chicks |
| Hatch Phase | Internal pipping, external pipping and emergence | Keep turning stopped in single-batch hatches; use chick separators if turning continues in multi-batch setups (ShellBr8ker, GleeGearNex) | Keep incubator closed to maintain high humidity for pipping eggs while hatched chicks dry |
Choosing an incubator that matches your flock goals makes following this schedule straightforward. For compact backyard batches, the WONEGG unit holds 12 eggs, the Syluris incubator (on Amazon) holds 24 chicken eggs, and larger models from ShellBr8ker and GleeGearNex hold up to 56 chicken eggs. If you are comparing equipment, our guide to the best incubator for chicken eggs details capacity options.
Set up the room and prepare your incubator
An incubator maintains internal conditions far more reliably when the surrounding room is calm and temperate. Place your unit in an interior room away from drafty windows, exterior doorways, air conditioning vents, and direct sunlight. Drafts and direct sun cause sudden temperature swings that overwork the heating element.
Ambient room stability is essential. For example, GleeGearNex specifies acceptable ambient room conditions between 64°F and 86°F (18°C to 30°C) with room humidity above 40%. Running your machine empty for several hours before loading eggs allows the heating system to stabilize and lets you confirm sensor readings. To monitor conditions independently, pair your unit with a secondary monitor from our incubator thermometer hygrometer guide.
Maintain steady operating temperature
Consistent warmth drives cell division and embryo growth. Even minor fluctuations can slow growth or stress developing chicks. Forced-air incubators use internal fans to distribute heat evenly across every row of eggs, eliminating hot or cold corners. Models from ShellBr8ker, GleeGearNex, and Oqioprd feature 360° airflow circulation to maintain uniform warmth throughout the chamber.
Modern digital units provide wide thermostat adjustment ranges. GleeGearNex lists a presettable temperature range of 68°F to 104°F (20°C to 40°C) on its digital controller. However, chicken egg incubation requires keeping warmth held at a steady target within that broad controller range, because even minor temperature deviations can slow development or stress embryos. Audible warnings provide peace of mind: Oqioprd includes an alert system that sounds if temperature drifts by 2°F (1°C) from the set value, alongside built-in overheat protection to guard against heat spikes. For setup advice, see our walkthrough on how to use an egg incubator, and read our breakdown of forced air vs still air incubator designs.
Manage humidity and ventilation across incubation stages
Managing humidity ensures that eggs lose moisture at a steady rate, allowing the internal air cell to enlarge properly without dehydrating the embryo. During early and mid incubation, moderate humidity prevents eggs from drying out too quickly, while lockdown requires higher humidity to keep the inner shell membranes pliable so chicks do not get stuck during pipping.
Incubator designs offer different approaches to moisture management. Syluris states that its system maintains humidity levels of 40% to 80% using dual external water ports of 200ml and 400ml, allowing keepers to add water without lifting the lid. GleeGearNex features an automated pump system with a presettable humidity range of 20% to 75% relative humidity. Oqioprd includes an alarm that sounds if humidity drifts by 10% from the set value. Ventilation directly influences moisture: opening vents releases humid air, while restricting vents helps conserve moisture. ShellBr8ker and GleeGearNex provide dual independent vent switches to fine-tune this balance between fresh air and humidity across different incubation stages. In damp weather, WONEGG notes that keepers can temporarily remove the water bottle to moderately reduce humidity. Learn more about automated moisture options in our guide to the incubator with humidity control.
Follow a regular egg turning schedule
A mother hen turns her clutch dozens of times each day. In an incubator, regular turning prevents the yolk and embryo from floating and sticking to the inner shell membrane, while ensuring equal exposure to warm air. Turning should occur several times each day from the moment eggs are set until lockdown arrives.
Automated egg turners eliminate the chore of manually rotating eggs every few hours. WONEGG provides an automatic turner that rotates eggs every 2 hours. Programmable models allow customized schedules: ShellBr8ker and GleeGearNex provide selectable turning intervals of 60, 90, 120, 150, or 210 minutes, while Syluris allows turning intervals of 60, 120, or 180 minutes. If your incubator uses manual trays, our review of the automatic egg turner covers standalone replacements.
Candling eggs during development
Candling involves shining a bright, focused beam of light through the shell to inspect embryo development. Checking eggs allows you to verify fertility and remove clear, unfertilized eggs before they spoil in the warm chamber.
Built-in LED candlers make this inspection convenient: models from WONEGG, Syluris, GleeGearNex, and Oqioprd include integrated candling lights directly on the top lid. During early development, look for a distinct dark spot with spider-web blood vessels extending outward. An unfertilized egg remains completely clear, while an early loss shows a faint red blood ring; both should be discarded. Another candling check before lockdown confirms that the embryo fills most of the shell, showing a clearly defined air cell at the blunt end. For dedicated lights, read our guide on what is an egg candler.
Entering lockdown before hatch day
Lockdown is the critical transition phase when active incubation ends and hatching preparation begins. In standard single-batch incubation, keepers stop egg turning, raise humidity, and close the machine until hatching finishes. Ceasing turning allows the chick to orient itself toward the blunt end of the egg with its beak pointed toward the air cell for pipping.
Manufacturers specify the exact schedule for this transition. Syluris instructs keepers to remove the egg tray on the 18th day, noting that turning halts 4 days prior to hatching. ShellBr8ker similarly stops turning automatically during the final 4 days before hatch day. GleeGearNex and WONEGG switch off automatic turning for the final 3 days before the target hatch day. When entering lockdown, top up water reservoirs to raise humidity, open vents to supply the higher oxygen levels that chicks need as they start breathing air, and keep the lid closed so the increased humidity stays trapped inside the chamber.
Pipping, hatching and moving chicks to the brooder
The hatching process begins when the chick uses its egg tooth to puncture the internal air cell, taking its initial breaths. Soon after, the chick creates a small crack in the outer shell known as the external pip. After resting, the chick slowly turns inside the shell, cutting a circular path around the blunt end in a process called unzipping, before pushing free.
Keep the incubator closed while chicks pip and emerge. Opening the lid drops humidity quickly, which can dry out the shell membranes and trap emerging chicks. While high humidity is maintained to protect unhatched eggs, newly hatched chicks dry and fluff out in the warm circulating air. They can remain safely inside the incubator until their down is dry and they are steady on their feet. For multi-batch or staggered hatches where turning continues for later batches, ShellBr8ker and GleeGearNex include transparent chick separators that shield hatched chicks from moving mechanical parts. Once chicks are dry and active, transfer them to a prepared nursery setup. Our guide to requirements for a chick brooder covers brooder heaters, bedding, and starter drinker setups.
A simple incubation checklist
- Set incubator in a room free from drafts and direct sunlight
- Verify steady temperature and check that alert alarms are functioning
- Confirm regular egg turning operates smoothly during active incubation
- Keep water reservoirs filled and monitor humidity levels
- Candle eggs to discard clear or infertile eggs before lockdown
- Stop turning on the 18th day, final 3 days, or final 4 days depending on manufacturer instructions
- Increase humidity and keep the incubator lid closed during hatching
- Allow chicks to dry and fluff out before moving them to the brooder
For collecting clean eggs before you start your hatch, see our guide on collecting eggs for incubation.
Pick a species and a set date for candling days, lockdown and hatch day, with a calendar file to save.
Run the incubator for a day before you set eggs to confirm temperature and humidity, keep it away from direct sun and drafts, and plug it into a protected outlet. Plan the brooder before hatch day. Wash your hands after handling eggs and chicks. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What does a chicken egg incubation chart track?
A chicken egg incubation chart tracks the essential daily conditions for hatching, including steady temperature, regular turning intervals, moisture levels, candling points, and the transition into lockdown.
Why must egg turning stop before hatching?
In standard hatches, egg turning stops during lockdown so the chick can orient itself toward the blunt end of the egg, pip into the internal air cell, and prepare to break through the outer shell without being disoriented by movement. Manufacturers like Syluris advise removing turning trays on the 18th day, while ShellBr8ker stops turning (on Amazon) automatically for the final 4 days, and GleeGearNex switches off turning for the final 3 days before the target hatch day.
What should I do if incubator temperature or humidity drifts?
Check the incubator immediately when conditions drift. Models like Oqioprd sound an alert if temperature drifts by 2°F (1°C) or humidity moves by 10% from the set value. Adjust external water levels or vent switches, and avoid opening the lid during late incubation stages.
Can I open the incubator lid during lockdown?
Avoid opening the lid during lockdown and active pipping. Opening the chamber releases warm, moist air, which can cause delicate inner shell membranes to shrink-wrap around the chick, making it difficult or impossible for the chick to emerge safely.
When should newly hatched chicks be moved to a brooder?
Leave newly hatched chicks inside the incubator until they are completely dry, fluffed out, and steady on their feet. Chicks absorb yolk before hatching and can stay comfortably in the warm incubator while hatch mates finish emerging, after which they should be moved to a prepared brooder.
More coop guides
- How to Use Egg Incubator: Step-by-Step Guide for Backyard Flocks
- Collecting Eggs for Incubation: Step-by-Step Guide for Backyard Flocks
- Best Incubator for Chicken Eggs: Hatch Picks by Size
- Forced Air vs Still Air Incubator: Which Should You Use?
See the incubators and hatching guides and the brooder resources.




