Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How Many T Post Clips Per Post

One clip per wire at each post: count the wires crossing a post, then match the gauge, post fit and pack size to your fence.

How Many T Post Clips Per Post
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Yukibefo T Post Clips 500 pcs Fence WireYukibefo T Post Clips 500 pcs Fence Wire9.6/10View on Amazon
  2. 2Hoqqf 500pcs T-Post Clips Fence Wire ClipsHoqqf 500pcs T-Post Clips Fence Wire Clips9.6/10View on Amazon
  3. 3LIFENCE 400-Pack T-Post Fence Clips with FreeLIFENCE 400-Pack T-Post Fence Clips with Free9.5/10View on Amazon
  4. 4Hoqqf 100pcs T-Post Clips Fence Wire ClipsHoqqf 100pcs T-Post Clips Fence Wire Clips9.5/10View on Amazon

Walk the run after a windy night and you will find it: a wire that has slipped off its post and hangs loose where the hens push against it. The fix is a handful of clips, but the count is the part that trips people up. The question behind this guide, how many t post clips per post, has a plain answer: a clip for every wire that crosses the post, so the count follows the wires on your fence.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Yukibefo T Post Clips 500 pcs Fence Wire

Yukibefo T Post Clips 500 pcs Fence Wire

Yukibefo9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 500-count box of 9-gauge galvanized clips for fastening wire to T-posts and U-posts up to 1.33 lb/ft, sized 2.85 by 2.2 by 1.8 inch.

Who it's for: a keeper fencing a long run who wants a large pack and a reusable clip.

Who should skip it: anyone mending a short stretch, where 500 clips is more than needed.

Yukibefo lists 500 clips in 5 bags of 9-gauge galvanized steel with a hot-dipped zinc finish, stated to resist corrosion and rust. The clips fit T-posts and U-posts up to 1.33 lb/ft, and the listing also names Y-posts and round posts. The clip size is about 2.85 by 2.2 by 1.8 inch, and the pack weighs 7.27 pounds. The listing states the clips can be reused, and names barbed wire, sheep, cattle and horse fences as uses. One wrinkle: the spec table lists the final dimension as 0.04 inches, while the bullets give 1.8 inch, so the bullets are the figure to trust here.

Pros

  • 9-gauge galvanized steel with a hot-dipped zinc finish
  • Fits T-posts, U-posts, Y-posts and round posts up to 1.33 lb/ft
  • Listing states the clips can be reused for a long time
  • Clip size and pack weight are stated

Cons

  • No warranty term is stated
  • Fence wire size the clip fits is not stated
  • The 500-count box is more than a small repair needs
  • Listing repeats the size and pack lines word for word
Hoqqf 500pcs T-Post Clips Fence Wire Clips

Hoqqf 500pcs T-Post Clips Fence Wire Clips

Hoqqf9.6/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 500-count box of pre-cut, pre-shaped 9-gauge galvanized clips for fastening chicken wire and welded mesh to T-posts and U-posts up to 1.33 lb/ft.

Who it's for: a keeper who wants a large pack of a plain, sturdy clip for chicken wire or welded mesh.

Who should skip it: anyone who needs a stated clip size or a fit for round posts.

Hoqqf lists 500 pre-cut and pre-shaped clips of 9-gauge galvanized steel, stated to resist rust and corrosion. The clips fit T-posts and U-posts up to 1.33 lb/ft and suit chicken wire and welded mesh, with the ends twisted or tightened for a firm hold. The listing names farm, garden and livestock fencing as uses. No clip dimensions and no pack weight are stated.

Pros

  • 9-gauge galvanized steel, stated to resist rust and corrosion
  • Pre-cut and pre-shaped for quick positioning
  • Fits T-posts and U-posts up to 1.33 lb/ft
  • 500 clips in one pack for a full run

Cons

  • No warranty term is stated
  • No clip dimensions are stated
  • No pack weight is stated
  • Stated fit covers T-posts and U-posts only
LIFENCE 400-Pack T-Post Fence Clips with Free

LIFENCE 400-Pack T-Post Fence Clips with Free

LIFENCE9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 400-count box of 11-gauge galvanized clips with a free drill chuck tool, for T-posts, U-posts, round steel posts and wood posts from 1.25 lb to 1.33 lb.

Who it's for: a keeper with a large run to clip who wants drill fitting and a fit for round steel and wood posts.

Who should skip it: anyone fencing with electric fence, or who wants 9-gauge steel.

LIFENCE lists 400 clips of 11-gauge galvanized steel with a free drill chuck tool, so a power drill tightens them instead of hand twisting. The clips fit T-posts, U-posts, round steel posts and wood posts from 1.25 lb to 1.33 lb, and the listing names chain link, woven wire, roadside, garden and sports fencing as uses, while stating the clips are not for electric fence. One wrinkle: the title calls the fitting tool-free while the listing includes a drill chuck tool, so read it as drill fitting.

Pros

  • Free drill chuck tool included for power-drill fitting
  • Fits T-posts, U-posts, round steel posts and wood posts from 1.25 lb to 1.33 lb
  • 11-gauge galvanized steel with a coating stated to withstand rain and snow
  • 400 clips per pack for large projects

Cons

  • No warranty term is stated
  • 11-gauge steel is thinner than the 9-gauge clips in this guide
  • Title calls the fitting tool-free while the listing includes a drill chuck tool
  • Not for electric fence, per the listing
Hoqqf 100pcs T-Post Clips Fence Wire Clips

Hoqqf 100pcs T-Post Clips Fence Wire Clips

Hoqqf9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 100-count box of pre-cut, pre-shaped 9-gauge galvanized clips for fastening chicken wire and welded mesh to T-posts and U-posts up to 1.33 lb/ft, sized for small repairs.

Who it's for: a keeper mending a short stretch who wants the 9-gauge clip without a bulk pack.

Who should skip it: anyone clipping a full run, where 100 clips run out.

Hoqqf lists 100 pre-cut and pre-shaped clips of 9-gauge galvanized steel, stated to resist rust and corrosion. The clips fit T-posts and U-posts up to 1.33 lb/ft and suit chicken wire and welded mesh, with the ends twisted or tightened for a firm hold. The listing shares part number 54UCB064 with the 500-count pack, so it is the same clip in a smaller box. No clip dimensions and no pack weight are stated.

Pros

  • 9-gauge galvanized steel, stated to resist rust and corrosion
  • Pre-cut and pre-shaped for quick positioning
  • Fits T-posts and U-posts up to 1.33 lb/ft
  • 100-count pack suits small repairs without an oversized bulk pack

Cons

  • No warranty term is stated
  • No clip dimensions are stated
  • No pack weight is stated
  • 100 clips cover fewer posts than the 500-count pack

How many t post clips per post

One clip holds one wire to one post, so count the wires that cross a post and that count is the clip count for that post. A post in the middle of a straight run takes a clip for every wire that passes it, and a post where the fence turns or ends takes a clip for every wire that meets it there. Check the post size against the standard T post dimensions chart before you order, and if you are still planning the fence, our guide to how many fence posts you need helps with the count.

What a clip does

A T post clip wraps around the wire and the post, then the ends twist or tighten to hold the wire snug. The clips in this guide are galvanized steel, which the listings state resists rust and corrosion outdoors, in 9-gauge and 11-gauge steel, where the lower gauge number is the thicker wire. They suit chicken wire, welded mesh, barbed wire and the other wire fencing the listings name. Our types of chicken wire guide covers the wire side of the job.

The clips that do the fastening

Once you have counted the wires on each post, these are the clips that do the fastening.

How to count and fit them

Walk the fence line and count the wires at each post, noting the posts where wires end or turn. Fit each clip around the wire and the post, then tighten the ends until the wire sits snug: the Hoqqf clips twist or tighten by hand, and the LIFENCE clips (on Amazon) take the included drill chuck tool for a power drill. Keep spare clips in the feed room for quick repairs.

Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

How many T post clips do I need per post?

One clip for every wire that crosses the post, so count the wires at each post.

Do T post clips fit U-posts too?

Yes, per the listings in this guide: the Hoqqf and Yukibefo clips (on Amazon) fit T-posts and U-posts up to 1.33 lb/ft, and the LIFENCE clips fit T-posts, U-posts, round steel posts and wood posts from 1.25 lb to 1.33 lb.

What gauge clip should I use?

The listings here offer 9-gauge and 11-gauge galvanized steel, and the lower gauge number is the thicker wire. The 9-gauge Hoqqf clips are listed for small to medium fencing projects, while the 11-gauge LIFENCE clips come with a drill chuck tool for fast fitting.

Can I reuse T post clips?

The Yukibefo listing states its clips can be reused. The other listings do not state reuse, so check the clip for bends or rust before you fit it again.

Do I need a special tool to fit them?

The Hoqqf clips twist or tighten by hand, so no special tool is needed for them. The LIFENCE clips come with a free drill chuck tool for a power drill, and the listing states they are not for electric fence. The Yukibefo listing states no fitting tool.

More coop guides

See the chicken runs and fencing guides and all coop supply guides.

More buying guides

Chicken Runs and Fencing ·

How to Use T Post Clip Tool

A clip tool seats the fence clip on the T-post and twists it tight so the wire holds fast to the post.