Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use T Post Clip Tool

A clip tool seats the fence clip on the T-post and twists it tight so the wire holds fast to the post.

How to Use T Post Clip Tool
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Clip Bender T-Post Clip Tool, Made in the USAClip Bender T-Post Clip Tool, Made in the USA9.5/10View on Amazon
  2. 2Jikbeed T-Post Clip ToolJikbeed T-Post Clip Tool9.5/10View on Amazon
  3. 3Quantfire Fence Wire Twister for T Post ClipsQuantfire Fence Wire Twister for T Post Clips9.5/10View on Amazon
  4. 4Ranchmate TB6 Fence Clip Tie Bar, 6 inchRanchmate TB6 Fence Clip Tie Bar, 6 inch9.3/10View on Amazon

The fence wire hangs loose from the T-post, the clips dangle, and the hens slip through the gap before the morning feed. Learning how to use t post clip tool puts the wire back tight: seat the clip in the tool, hook it on the post, and twist it so the wire holds fast to the post.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

Clip Bender T-Post Clip Tool, Made in the USA

Clip Bender T-Post Clip Tool, Made in the USA

Clip Bender9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A steel T-post clip tool with a yellow rubber grip and a black oxide coating, made in the USA, that fastens fence clips to the post.

Clip Bender lists the tool at 6.75 in by 2.5 in by 0.3 in, in 100% steel with a black oxide coating that prevents rust and a comfortable yellow rubber grip. The bright yellow handle is easy to spot, and the maker is LockNLube in New Hampshire. One tool comes in the box, model CB001.

Pros

  • 100% steel with a black oxide coating that prevents rust
  • Comfortable yellow rubber grip
  • Bright yellow handle for greater visibility
  • Made in the USA by LockNLube in New Hampshire

Cons

  • Single tool in the box, so another tool needs another order
  • No jaw opening is stated
  • One size only, with no other size to swap to
  • Fastens clips only, with no wire-twisting holes stated
Jikbeed T-Post Clip Tool

Jikbeed T-Post Clip Tool

Jikbeed9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece steel clip tool with a red rubber-coated handle and a 0.6 in max jaw opening that twists T-post clips and fence wire.

Jikbeed lists the tool in steel, rust-resistant, with a red rubber-coated handle and jaws 0.9 in wide and 0.5 in deep, with a 0.6 in max jaw opening. The box holds 2 pcs, and the tool works as both a T-post clip tool and a fence wire twisting tool.

Pros

  • Red rubber-coated handle for grip
  • Jaw dimensions stated: 0.9 in wide, 0.5 in deep, 0.6 in max opening
  • Works as both a T-post clip tool and a fence wire twisting tool
  • 2 pcs in the box, so a spare is on hand

Cons

  • 0.6 in max jaw opening, so a wider clip will not fit
  • No overall length is stated
  • Both pieces are the same tool, so the pair adds no other size
  • No coating is named on the steel
Quantfire Fence Wire Twister for T Post Clips

Quantfire Fence Wire Twister for T Post Clips

Quantfire9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack stainless steel twister with 5 mm and 7 mm holes that bends wire and twists T-post clips in a tight spot.

Quantfire lists the twister in stainless steel, about 2 mm thick, with two holes of 5 mm and 7 mm for bending wire. The elbow part twists left and right in a limited space, and the box holds 2 pcs.

Pros

  • Stainless steel, about 2 mm thick
  • Two holes, 5 mm and 7 mm, for bending wire
  • Elbow part twists left and right in a limited space
  • 2-pack in the box, so a spare is on hand

Cons

  • No handle or grip is stated
  • No jaw opening is stated
  • No warranty term is stated
  • No weight figure is stated
Ranchmate TB6 Fence Clip Tie Bar, 6 inch

Ranchmate TB6 Fence Clip Tie Bar, 6 inch

Preformed Line9.3/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch nickel-plated steel tie bar for fastening fence clips to the post.

Preformed Line lists the Ranchmate TB6 as a 6 inch fence clip tie bar in nickel-plated steel, sturdy and long-lasting, at 0.2 pounds. The maker gives two lengths, 6 inch and 3.0 inches; check before ordering. One bar comes in the box.

Pros

  • Nickel-plated steel, sturdy and long-lasting
  • 6 inch tie bar for fastening fence clips
  • 0.2 pounds, light to carry
  • Suits building, extending or repairing a fence

Cons

  • No warranty term is stated
  • Single bar in the box
  • No handle or grip is stated
  • No jaw or hole size is stated

How to use t post clip tool: seat the clip and twist

Start with the clip on the wire and the post behind it. Seat the clip in the tool, hook the clip over the T-post, and twist the tool until the clip wraps the post and holds the wire. Work along the fence line clip by clip, and check each clip holds the wire against the post before moving on. The Ranchmate tie bar is a plain steel bar for fastening the clip, with no jaws or holes stated.

Pick a tool that matches the clip

Clip tools here come in a few shapes: a twister with holes for bending wire, a jaw tool with a handle, a bender with a grip, and a plain tie bar. Match the tool to the clip: the Jikbeed jaws open to 0.6 in, and the Quantfire holes measure 5 mm and 7 mm. For how many clips a post takes, see the how many T-post clips per post guide.

Seat the clip and twist it tight

Hold the wire against the T-post with one hand and the tool with the other. Seat the clip in the tool, hook it over the post, and twist until the clip wraps tight. If the clip slips, seat it deeper and twist again. Do not force a clip that will not close; check that the tool fits the clip first.

Check the wire after the first clip

After the first clip, pull the wire by hand to check it holds. If the wire moves, fasten the clip tighter or seat it again. Walk the fence line and check each clip, and look at the wire where it meets the post for gaps. A clip that holds the wire close to the post keeps the wire from pulling away from the post.

T-post clip tools for the run

The tool choice decides how the clip fastens, so match the tool to the clip size, the wire, and the grip the job needs.

Keep the clip tool working

A clip tool that sticks makes the fence job slow. Wipe the jaws and holes clean after use, and keep the tool dry so the steel stays free of rust. The Clip Bender has a black oxide coating that prevents rust, and the Jikbeed steel is rust-resistant. Check the handle and the grip when the seasons change, and swap a tool with bent jaws rather than bending it back.

Chicken Coop Size Calculator

Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.

Open the calculator
Flock safety basics

Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.

FAQ for the flock

What does a T-post clip tool do?

It fastens a fence clip to a T-post so the wire holds tight to the post. The Jikbeed and Quantfire tools twist the clip and the wire, the Clip Bender fastens the clip, and the Ranchmate tie bar is a plain steel bar for fastening clips.

Which hole size fits fence wire?

The Quantfire twister has 5 mm and 7 mm holes for bending wire. Match the hole to the wire, and check the wire fits the hole before twisting.

Do T-post clip tools work on barbed wire?

The Quantfire listing names barbed wire among its uses, and it twists wire for fencing. Check the wire size against the tool holes before twisting.

Can one tool fasten clips and twist wire?

Yes, the Jikbeed tool (on Amazon) works as both a T-post clip tool and a fence wire twisting tool, and the Quantfire twister bends wire and twists clips.

What size jaws do I need for T-post clips?

The Jikbeed jaws measure 0.9 in wide and 0.5 in deep, with a 0.6 in max jaw opening. Measure the clip and match it to the jaw opening before ordering.

More coop guides

See the chicken runs and fencing picks and the chicken run ideas guide.

More buying guides

Chicken Runs and Fencing ·

How Many T Post Clips Per Post

One clip per wire at each post: count the wires crossing a post, then match the gauge, post fit and pack size to your…