Staple Gun Staple Size: Leg Length and Crown Width for the Run
T50 staples carry a 3/8 inch crown, and the leg runs 1/4, 5/16, 3/8 or 1/2 inch: match the leg to the material and the crown to the gun.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
meite T50 Staples, 1/4, 3/8 and 1/2 Inch Legs9.5/10View on Amazon - 2
Arrow Fastener 505IP Heavy Duty T50 Staples9.5/10View on Amazon - 3
meite T50 Staples, 3/8 Inch Length9.5/10View on Amazon - 4
Arrow 50MP T50 Staples Multipack, 1/49.5/10View on Amazon
The wire on the run has worked loose at the corners, and the staple box on the shelf holds sizes that all look alike. Staple gun staple size comes down to the leg length and the crown width. Match the leg to the thickness of the material and the crown to the gun, and the staple holds. The sizes below come from the staple listings, so you can match the staple to the gun before you buy.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

meite T50 Staples, 1/4, 3/8 and 1/2 Inch Legs
A 2,520 count pack of galvanized T50 staples in 1/4, 3/8 and 1/2 inch legs, 840 of each, with a 3/8 inch crown and 20 gauge wire.
Who it's for: keepers who want all 3 leg lengths for the run and the coop.
Who should skip it: anyone who wants one leg length alone, or a stated warranty term.
The meite 3-size pack covers the sizing question in one box: 1/4, 3/8 and 1/2 inch legs, 840 of each, for a total of 2,520 galvanized staples. The listing states 20 gauge wire and a 3/8 inch crown for T50 staple guns.
The listing states the staples are galvanized for rust and corrosion resistance, and it warns they are not compatible with meite MT7116, MT7116S, MT7116LN, MT5016S and MT5016SLN air staplers. No warranty term is stated.
Pros
- 3 leg lengths in one pack: 1/4, 3/8 and 1/2 inch
- 2,520 staples, 840 of each size
- Galvanized for rust and corrosion resistance, per the listing
- 20 gauge with a 3/8 inch crown for T50 guns
Cons
- No warranty term is stated on the listing
- The pack mixes sizes, so one leg length cannot be bought alone
- Not compatible with meite MT7116 air staplers, per the listing

Arrow Fastener 505IP Heavy Duty T50 Staples
A 5000 pack of heavy-duty T50 staples with a 5/16 inch leg and a 3/8 inch crown, made in the USA for Arrow T50 guns, tackers and pneumatic tools.
Who it's for: keepers who know they want the 5/16 inch leg and want a large pack.
Who should skip it: anyone who wants a choice of leg lengths, or a galvanized finish stated.
The Arrow 505IP is the single-size workhorse here: 5,000 heavy-duty T50 staples with a 5/16 inch leg and a 3/8 inch crown. The listing states a weight of 0.68 pounds and a part number of A505IP, and it lists T50 guns, tackers and pneumatic tools as compatible.
The staples come in chisel or divergent points, per the listing, and the listing states made in the USA. No warranty term or gauge is stated.
Pros
- 5,000 staples in one pack
- 5/16 inch leg with a 3/8 inch crown for T50 guns
- Heavy-duty steel with chisel or divergent points, per the listing
- Made in the USA, per the listing
Cons
- No warranty term is stated on the listing
- One leg length only, so no size choice in the pack
- No galvanized finish is stated
- The listing does not state a gauge

meite T50 Staples, 3/8 Inch Length
A 1,512 count pack of galvanized T50 staples in 3/8 inch length, 20 gauge with a 3/8 inch crown, for T50 staple guns.
Who it's for: keepers who want the 3/8 inch leg in a galvanized pack.
Who should skip it: anyone who wants a choice of leg lengths, or a stated weight.
The meite 1,512 pack is the single-size galvanized option: 3/8 inch length staples, 20 gauge, with a 3/8 inch crown for T50 staple guns. The listing states 1,512 counts and dimensions of 5.5 x 4.3 x 0.6 in.
The listing states the staples are galvanized for rust and corrosion resistance, and it warns they are not compatible with meite MT7116, MT7116S, MT7116LN, MT5016S and MT5016SLN air staplers. The listing also states the staples are equivalent to Type G, 140 series staples. No weight or warranty term is stated.
Pros
- 1,512 galvanized staples in 3/8 inch length
- 20 gauge with a 3/8 inch crown for T50 guns
- Galvanized for rust and corrosion resistance, per the listing
- Equivalent to Type G, 140 series staples, per the listing
Cons
- No warranty term is stated on the listing
- One leg length only, so no size choice in the pack
- Not compatible with meite MT7116 air staplers, per the listing
- No weight is stated on the listing

Arrow 50MP T50 Staples Multipack, 1/4
A multipack of heavy-duty T50 staples in 1/4, 3/8 and 1/2 inch legs with a 3/8 inch crown, for Arrow T50 guns, tackers and pneumatic tools.
Who it's for: keepers who want 3 leg lengths in one multipack.
Who should skip it: anyone who wants a clear count, or one leg length alone.
The Arrow 50MP multipack covers 3 leg lengths in one box: 1/4, 3/8 and 1/2 inch legs with a 3/8 inch crown, for Arrow T50 guns, tackers and pneumatic tools. The listing states heavy-duty steel construction and precision points that drive deep.
Read the count with care: the title states 1875 while the spec table lists 5000 items, and the title lists 3 sizes while the bullets list 4 leg lengths, adding 5/16 inch. Trust the title over the spec table for the count, and check the bullets for the full size range before you order. No warranty term is stated.
Pros
- 3 leg lengths in one pack: 1/4, 3/8 and 1/2 inch
- 3/8 inch crown for T50 guns, tackers and pneumatic tools
- Heavy-duty steel with precision points, per the listing
- Stated for wood, fabric, carpet and other materials
Cons
- No warranty term is stated on the listing
- The pack mixes sizes, so one leg length cannot be bought alone
Other options for the coop
NEU MASTER Staple Gun with Staple RemoverCheck price on Amazon
SHALL Light Duty Staple Gun for WoodCheck price on Amazon
THINKWORK Light Duty Staple GunCheck price on Amazon
Arrow T25 Heavy Duty Staple Gun for Low Voltage Cables andCheck price on Amazon
Arrow T50X Heavy-Duty Staple GunCheck price on Amazon
DIYSELF Staple Gun Heavy Duty 4-in-1 Upholstery Stapler withCheck price on Amazon
Staple gun staple size: leg length and crown width
Every staple in these listings is a T50 staple, and every one states a 3/8 inch crown. The leg length is the size that changes: the Arrow multipack lists legs of 1/4, 5/16, 3/8 and 1/2 inch, which the listing gives as 6, 8, 10 and 12mm, and the meite 3-size pack lists 1/4, 3/8 and 1/2 inch legs. The single-size packs list one leg each: 5/16 inch for the Arrow 505IP and 3/8 inch for the meite 1,512 pack. Crown width decides whether the staple fits the gun; leg length decides how deep it holds.
Leg length: match it to the material
A longer leg holds in thicker material, and a shorter leg suits thin material where a long leg would poke through. Legs in these listings run from 1/4 inch to 1/2 inch, with 5/16 and 3/8 inch legs between them. The meite 3-size pack carries 840 staples of each leg length, 1/4, 3/8 and 1/2 inch, so one pack covers 3 of the 4 leg lengths in these listings. Check the leg against the material before you load the gun, since a leg that is too short pulls out and a leg that is too long bends.
Crown width and gauge
The crown is the flat top of the staple, and all the listings state a 3/8 inch crown for T50 guns. The meite listings state 20 gauge wire, which is the wire thickness of the staple. A T50 gun takes T50 staples, and the listings name the compatible tools: the Arrow listings name the T50, T50X, T50HS, 5700, HT50 and PT50, among others, and the meite listings name T50 guns of all brands. The meite listings also warn that T50 staples are not compatible with meite MT7116, MT7116S, MT7116LN, MT5016S and MT5016SLN air staplers.
Galvanized for the run
The run lives outdoors, so the staple has to resist rust. Both meite listings state galvanized staples with resistance to rust and corrosion, and the meite 1,512 pack states the same finish for wide use. The Arrow listings state heavy-duty steel construction without naming a finish, so the galvanized packs are the ones that state rust resistance. For wire and mesh on the run, the galvanized packs are the ones that state resistance to rust and corrosion.
The gear: staples for the staple gun
Each size above has a pack for it, so the listings below cover the leg lengths, the crown and the galvanized finish for the run and the coop.
Use a charger rated for the length of netting you run, ground it as the manual describes and post warning signs where neighbors or children can reach the fence. Keep grass and weeds off the bottom strands, and never leave netting unpowered, because birds and wildlife can tangle in it. Read our Safety Disclaimer.
FAQ for the flock
What size staples fit a T50 staple gun?
T50 staples with a 3/8 inch crown, in legs of 1/4, 5/16, 3/8 or 1/2 inch. The listings state T50 fit, and the Arrow listings name the T50, T50X, T50HS, 5700, HT50 and PT50 tools.
What does the 3/8 inch crown mean?
The crown is the flat top of the staple, and 3/8 inch is its width. All four listings state a 3/8 inch crown, which is the T50 crown size, and the meite listings state 20 gauge wire.
Are galvanized staples better for the run?
Yes, for outdoor use. Both meite listings state galvanized staples with resistance to rust and corrosion, while the Arrow listings state heavy-duty steel without naming a finish.
How many staples come in a pack?
The Arrow 505IP lists 5,000 staples, the meite 3-size (on Amazon) pack lists 2,520, and the meite single-size pack lists 1,512. The Arrow multipack title states 1,875 while its spec table lists 5,000 items, so check the count before you order.
Will these staples fit my staple gun?
They fit a T50 staple gun, tacker or pneumatic tool, per the listings. The meite listings warn that T50 staples are not compatible with meite MT7116, MT7116S, MT7116LN, MT5016S and MT5016SLN air staplers, so check the tool list on the pack.
More coop guides
- Best Chicken Run Cover: Tarps and Roofs That Fit
- Best Chicken Run Flooring: Sand, Wood Chips and More
- Attached Run vs Separate Chicken Run: Which One Should You Buy?
- Best Hardware Cloth for Chicken Coop Runs and Aprons
- Best Chicken Wire Cutters for Hardware Cloth (2026)
- 4×4 vs 4×6 Chicken Run: Which One Should You Buy?
- Best Cable Ties for Chicken Run (2026)
- Best Chicken Wire 16 Gauge (2026)
See the chicken run and fencing guides and the hardware cloth picks.




