Types of Staple Guns: Which One Fits Wire Fencing
Manual, multi-type and light duty staple guns compared for wire fencing: which type holds mesh, which takes brads, and which suits a light hand.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
DEWALT DWHTTR510 5-in-1 Multi-Tacker9.5/10View on Amazon - 2
Arrow Heavy Duty 3-in-1 Upholstery Staple Gun9.5/10View on Amazon - 3
Arrow T50 Heavy-Duty Staple Gun, Manual Stapler9.5/10View on Amazon - 4
THINKWORK Light Duty Staple Gun with 1600 JT219.5/10View on Amazon
The wire mesh on the run has pulled loose at the corner, and the staples that held it have worked their way out. A staple gun is the tool for putting it back, but the shelf holds several kinds. Types of staple guns split by what they take and the work they suit: manual heavy duty guns, multi-type guns that take staples and brads, and light duty guns for fabric and crafts.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

DEWALT DWHTTR510 5-in-1 Multi-Tacker
A 5-in-1 multi-tacker with easy-squeeze action, an anti-jam magazine and a die-cast aluminum body that takes DEWALT, Arrow T-50 and Stanley TRA700 staples plus 18 gauge brads.
Who it's for: a keeper who wants one gun for staples and brads across the coop and run.
Who should skip it: anyone who wants staples in the box or a stated staple size.
The DEWALT multi-tacker is the widest-ranging gun here: it takes DEWALT heavy duty staples, Arrow T-50 staples, Stanley TRA700 series staples and 18 gauge brads, with easy-squeeze action and an anti-jam magazine. The die-cast aluminum housing keeps it light, and the listing states a 3 year manufacturer warranty.
A note: the spec table dimensions include a 35.85 inch figure that does not match a hand tacker, so the 13.028 inch length is the clearer guide. The listing states no staple sizes and no included staples.
Pros
- Takes DEWALT, Arrow T-50 and Stanley TRA700 staples plus 18 gauge brads
- Easy-squeeze technology reduces actuation force
- Anti-jam magazine prevents jams and misfires
- 3 year manufacturer warranty
Cons
- No staple size figures are stated
- No staples are stated as included
- No handle lock is stated

Arrow Heavy Duty 3-in-1 Upholstery Staple Gun
A manual 3-in-1 staple gun with 3000 staples in three sizes, a power adjustment knob and a handle lock, made for wood, wire and craft work.
Who it's for: a keeper who wants one gun for staples and brads with power adjustment.
Who should skip it: anyone who wants a stated warranty or a single staple size.
The Arrow 3-in-1 is the multi-type gun here: it takes T50 staples at 3/8 by 5/16 inch, T18 staples at 3/16 by 1/2 inch and BN18 brads at 1/8 by 5/8 inch, with 3000 staples in the box and a staple remover. A screw knob on top adjusts power between high and low settings, and a quick-release mechanism clears stuck staples.
The handle lock holds the gun shut in storage, and the rubber grip groove suits long sessions, per the listing. The listing states no warranty term and no weight. It suits wood, wire, decoration and roofing work, per the listing.
Pros
- 3000 staples included in three sizes
- Takes T50, T18 and BN18 fasteners
- Power adjustment knob with high and low settings
- Handle lock for safe storage
Cons
- No warranty term is stated
- No weight is stated
- No case or storage bag is stated
- No dimensions are stated

Arrow T50 Heavy-Duty Staple Gun, Manual Stapler
A chrome steel heavy-duty staple gun with a high leverage handle, a jam-resistant rear-load magazine and a staple-viewing window, fitting T50 staples from 1/4 to 9/16 inch.
Who it's for: a keeper who wants the standard heavy duty gun for mesh and upholstery.
Who should skip it: anyone who wants staples in the box or a longer warranty.
The Arrow T50 is the heavy duty standard here: a chrome steel body with parts hardened in a 1,500-degree furnace, a high leverage handle, and a rear-load magazine with a jam-resistant mechanism and a staple-viewing window. It fits T50 staples in 1/4, 5/16, 3/8, 1/2 and 9/16 inch, sold separately, and it weighs 2.3 pounds.
The listing states a 90-day warranty from date of purchase. It suits insulation, upholstery, wood, general repairs and crafts, per the listing. The listing gives dimensions of 11.0 x 3.0 x 2.0 inches.
Pros
- Fits T50 staples from 1/4 to 9/16 inch
- Chrome steel body hardened in a 1,500-degree furnace
- Jam-resistant rear-load magazine with staple-viewing window
- High leverage handle for comfortable strikes
Cons
- Staples sold separately
- 90-day warranty from date of purchase
- No staple remover is stated
- No power adjustment is stated

THINKWORK Light Duty Staple Gun with 1600 JT21
A light duty pink staple gun with 1600 JT21 staples in three sizes, a handle lock and a magnetic remover, made for crafts and light home use.
Who it's for: a keeper who wants a light gun for fabric, crafts and light mesh work.
Who should skip it: anyone who needs T50 staples or heavy duty driving.
The THINKWORK gun is the light duty example: JT21 staples only, 1600 in the box, 400 of 1/4 inch, 800 of 5/16 inch and 400 of 3/8 inch, with a handle lock and a magnetic staple remover on the handle. The bullets state a weight of 5.1 oz, and the compact pink body fits a drawer or a tool belt pouch.
A note: the spec table states 0.7125 pounds, which does not match the bullets' 5.1 oz, so the bullets are the clearer guide. The warranty description reads 1, with no unit stated, so this guide scores no warranty. The listing names wire mesh among its uses.
Pros
- 1600 JT21 staples included in three sizes
- Light at 5.1 oz, per the bullets
- Handle lock and magnetic staple remover
- Bottom staple magazine loads fast
Cons
- Warranty Description reads 1, with no unit stated
- Light duty only; takes JT21 staples, not T50
- No power adjustment is stated
Types of Staple Guns: Manual, Multi-Type and Light Duty
A manual staple gun drives with a squeeze of the handle, and the four examples here are all manual. The heavy duty guns here take T50 staples, the light duty gun here takes JT21 staples, and the multi-type guns take more than one fastener. The staple size is the first thing to match to the job: T50 staples run from 1/4 inch to 9/16 inch on the Arrow T50 listing, while JT21 staples run from 1/4 inch to 3/8 inch on the THINKWORK listing. Our staple gun staple size guide lays out the sizes in more detail.
How hard each gun drives is the other split. The Arrow 3-in-1 listing uses a screw knob on top with high and low power settings, so the same gun can drive into different material thicknesses. The DEWALT listing uses easy-squeeze technology to reduce actuation force, and the Arrow T50 listing uses a high leverage handle for comfort and consistent strikes. The light duty gun here is the lightest of the four: the THINKWORK listing weighs 5.1 oz, against 2.3 pounds for the Arrow T50 listing.
Manual heavy duty: the T50 standard
The Arrow T50 is the standard heavy duty manual gun here: chrome steel, hardened parts, a rear-load magazine with a jam-resistant mechanism, and a window that shows when to reload. It fits T50 staples from 1/4 inch to 9/16 inch, sold separately. The DEWALT multi-tacker (on Amazon) takes the same Arrow T-50 staples, plus its own DWHTTA700 series and Stanley TRA700 series staples, and 18 gauge brads. For the mesh itself, our hardware cloth guide covers what to buy.
Multi-type guns: 3-in-1 and 5-in-1
Multi-type guns trade a single staple size for range. The Arrow 3-in-1 takes three fasteners with 3000 staples in the box: T50 staples at 3/8 by 5/16 inch, T18 staples at 3/16 by 1/2 inch, and BN18 brads at 1/8 by 5/8 inch, plus a staple remover. The DEWALT 5-in-1 takes DEWALT heavy duty staples, Arrow T-50 staples, Stanley TRA700 series staples, and 18 gauge brads.
A remover comes with two of the guns here: the Arrow 3-in-1 includes a staple remover, and the THINKWORK light duty gun (on Amazon) has a magnetic remover on the handle. The DEWALT listing states no remover. The DEWALT listing names an anti-jam magazine, and the Arrow T50 listing names a jam-resistant mechanism with a rear-load magazine.
Light duty: when a small gun is enough
The THINKWORK gun is the light duty example: JT21 staples only, a pink compact body, and a handle lock that keeps it shut in a drawer or a tool belt pouch. It suits fabric, crafts and light home use, and its listing names wire mesh among its uses. A light gun takes JT21 staples only, not T50, so match the gun to the staple the job needs: T50 for fencing mesh and heavy work, JT21 for fabric and light fastening. See our best staple gun for hardware cloth picks for mesh work.
The Gear for Wire Fencing
The four guns below cover the types above: a 5-in-1 tacker, a 3-in-1 gun, a heavy duty T50 gun, and a light duty JT21 gun, each with the staple sizes it takes.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
What staple gun do I need for chicken wire?
A manual heavy duty gun that takes T50 staples, such as the Arrow T50 in this guide, holds wire mesh to wood. Match the staple length to the wood: the Arrow T50 listing fits T50 staples from 1/4 inch to 9/16 inch. A light duty JT21 gun suits fabric and light work, though its listing names wire mesh among its uses.
What is the difference between T50 and JT21 staples?
T50 is the heavy duty size, and JT21 is the light duty size. The Arrow T50 listing fits T50 staples from 1/4 inch to 9/16 inch, while the THINKWORK listing fits JT21 staples from 1/4 inch to 3/8 inch. The two sizes do not fit the same gun.
Can a staple gun use brad nails?
Some can. The Arrow 3-in-1 listing takes BN18 brads at 1/8 by 5/8 inch, and the DEWALT listing takes 18 gauge brads. A gun that takes only T50 or only JT21 staples will not take brads.
How do I keep a staple gun from jamming?
Use the staple size the listing names, and load the magazine as the listing shows. The DEWALT listing names an anti-jam magazine, the Arrow T50 listing names a jam-resistant mechanism, and the Arrow 3-in-1 listing has a quick-release mechanism that removes stuck staples.
Do staple guns come with staples?
Some do. The Arrow 3-in-1 listing includes 3000 staples, and the THINKWORK listing includes 1600 JT21 staples. The Arrow T50 listing states its staples are sold separately.
More coop guides
- Best Hardware Cloth for Chicken Coop Runs and Aprons
- Best Staple Gun for Hardware Cloth (2026)
- Staple Gun Staple Size: Leg Length and Crown Width for the Run
- Staples vs Nails for Chicken Wire: Which One Should You Buy?
- Best Galvanized Fence Staples (2026)
See the chicken runs and fencing hub and the coop supply guides.




