Stainless vs Galvanized Gate Latch: Which One Should You Buy?
Stainless and galvanized gate latches compared on rust resistance, self-locking action, fit and padlock security, with two examples of each side.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
QCAA 304 Stainless Steel Self-Locking Gate Latch9.6/10View on Amazon - 2
QCAA 304 Stainless Steel Self-Locking Gate Latch9.5/10View on Amazon - 3
1-3/8 in Fork Latch Galvanized Fence Gate Latch9.5/10View on Amazon - 4
Wmebee Wall Mount Butterfly Latch 1-3/89.5/10View on Amazon
Stainless vs galvanized gate latch verdict: Choose a stainless latch for a swinging coop or run gate you open every day: it locks by itself when the gate swings shut, and the maker lists 304 stainless steel. Choose a galvanized latch for a chain link fence gate: the fork and butterfly latches fit named frame sizes, and each lists rust and corrosion resistance.
Morning chores start at the gate: you swing it open, carry feed and water through, and swing it shut behind you. A latch that stays shut keeps chickens in and dogs out. This stainless vs galvanized gate latch comparison covers the two materials side by side, then two examples of each side.
CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.
Two examples of each side

QCAA 304 Stainless Steel Self-Locking Gate Latch
A 304 stainless steel self-locking latch, 2-1/8 in, with a 4-11/16 in latch bar and mounting hardware, sold as a pack of 2.
Who it's for: a keeper with two swinging gates who wants both to lock by themselves.
Who should skip it: anyone with a chain link gate, where a fork or butterfly latch fits better.
The QCAA 2-pack is a 304 stainless steel self-locking latch, 2-1/8 in, with a latch bar 4-11/16 in long and a diameter of 8.9 mm. It locks automatically, fits right or left hand and in or out installations, can be padlocked, and includes mounting hardware with Philip #8 screws.
Pros
- Locks automatically when the gate swings shut
- 304 stainless steel construction
- Mounting hardware included
- Two latches in the pack
Cons
- Padlock not included
- Fits swinging gates and doors only
- No frame size range stated
- Both latches are the same 2-1/8 in size

QCAA 304 Stainless Steel Self-Locking Gate Latch
A 304 stainless steel self-locking latch, 2-1/8 in, with a 4-11/16 in latch bar and mounting hardware, sold as a single latch.
Who it's for: a keeper with one swinging gate who wants it to lock by itself.
Who should skip it: anyone with a chain link gate, where a fork or butterfly latch fits better.
The QCAA 1-pack is a 304 stainless steel self-locking latch, 2-1/8 in, with a latch bar 4-11/16 in long and a diameter of 8.9 mm. It locks automatically, fits right or left hand and in or out installations, can be padlocked, and includes mounting hardware with Philip #8 screws.
Pros
- Locks automatically when the gate swings shut
- 304 stainless steel construction
- Mounting hardware included
- Fits right or left hand, in or out installations
Cons
- No warranty term is stated
- One latch in the pack
- Fits swinging gates and doors only
- No frame size range stated

1-3/8 in Fork Latch Galvanized Fence Gate Latch
A galvanized steel fork latch for 1-1/4 to 1-3/8 in chain link frames, with a padlock hole, listed to resist dogs opening the gate.
Who it's for: a keeper with a chain link kennel or run gate on a 1-1/4 to 1-3/8 in frame.
Who should skip it: anyone with a swinging wooden gate.
The MLHpeak fork latch is galvanized steel, 1-3/8 in, made for chain link fence gate frames. It fits gate and panel frames from 1-1/4 to 1-3/8 in, has a padlock hole, mounts to the gate post or wall, and is made to resist dogs opening the gate. About 1 in of spacing is stated between the gate and the panel.
Pros
- Galvanized steel listed to prevent rust and corrosion
- Padlock hole stated
- Listed to resist dogs opening the gate
- Fits 1-1/4 to 1-3/8 in gate and panel frames
Cons
- No warranty term is stated
- Fits only 1-1/4 to 1-3/8 in frames
- Needs about 1 in spacing between gate and panel
- One latch in the pack

Wmebee Wall Mount Butterfly Latch 1-3/8
A hot-dip galvanized wall-mount butterfly latch for 1-3/8 to 1-5/8 in pipe, with a padlock hole, needing 2 in between wall and frame.
Who it's for: a keeper with a chain link gate beside a wall, on pipe from 1-3/8 to 1-5/8 in.
Who should skip it: anyone who needs screws in the box.
The Wmebee butterfly latch is hot-dip galvanized steel for wall mounting on chain link fence gates. It fits pipe with an outside diameter from 1-3/8 to 1-5/8 in, has a built-in padlock hole, needs a minimum of 2 in between the wall and the frame, and states screws are not included.
Pros
- Hot-dip galvanized, listed as high corrosion resistance
- Padlock hole stated
- Fits 1-3/8 to 1-5/8 in pipe outside diameter
- Wall mount for chain link fence gates
Cons
- Screws are not included
- Needs a minimum of 2 in between wall and frame
- Fits only 1-3/8 to 1-5/8 in pipe
- Padlock not included
Other options for the coop
National Hardware Heavy Duty Sliding Bolt Gate LatchCheck price on Amazon
Advantage Industries Stainless Steel Gate LatchCheck price on Amazon
National Hardware Automatic Gate Latch with 4 in BarCheck price on Amazon
Hardware Essentials Gate LatchCheck price on Amazon
National Hardware MaxLatch Gate LatchCheck price on Amazon
National Hardware N262-121 V21 Automatic Gate Latch inCheck price on Amazon
Stainless vs galvanized gate latch: side by side
| Factor | Stainless | Galvanized | Example |
|---|---|---|---|
| Material | 304 stainless steel | Galvanized steel | QCAA lists 304 stainless; Wmebee lists hot-dip galvanized |
| Rust resistance | Stainless steel construction | Listed to prevent rust and corrosion | MLHpeak lists galvanized steel to prevent rust and corrosion |
| Locking action | Self-locking, locks automatically | Fork or butterfly catch | QCAA locks automatically; MLHpeak and Wmebee use a fork or butterfly catch |
| Padlock | Can be padlocked | Padlock hole stated | All four latches state a padlock hole or padlock function |
| Fit | Swinging gates and doors | 1-1/4 to 1-3/8 in; 1-3/8 to 1-5/8 in | MLHpeak fits 1-1/4 to 1-3/8 in; Wmebee fits 1-3/8 to 1-5/8 in |
| Mounting | Mounting hardware included | Wall mount; screws not always included | QCAA includes screws; Wmebee states screws are not included |
| Pack | 1 pack or 2 pack | Pack of 1 | QCAA offers a 2-pack; the galvanized latches are sold singly |
These figures are the coop makers’ own ratings, read from each listing on 18 November 2026.
Rust resistance
The QCAA latches are 304 stainless steel, and the maker lists stainless steel construction with a padlock function. The MLHpeak latch is galvanized steel, listed to prevent rust and corrosion, and the Wmebee latch is hot-dip galvanized, listed as high corrosion resistance and not prone to rust. Neither side gives a coating thickness or a rust rating.
Locking action and padlock security
The stainless latches lock by themselves: the QCAA latches lock automatically and fit right or left hand, in or out installations. The galvanized latches work differently: the MLHpeak fork latch and the Wmebee butterfly latch catch the gate frame and hold it, with a padlock hole to add a padlock. Each latch states a padlock hole or a padlock function, so add a padlock that fits if the gate must stay locked while you are away.
Fit and mounting
Fit is where the two sides differ most, so measure before ordering. The QCAA latches are 2-1/8 in for swinging gates and doors, with a latch bar 4-11/16 in long and a diameter of 8.9 mm, and mounting hardware with Philip #8 screws included. The MLHpeak fork latch fits gate and panel frames from 1-1/4 to 1-3/8 in, with about 1 in of spacing between the gate and the panel. The Wmebee butterfly latch fits pipe with an outside diameter from 1-3/8 to 1-5/8 in, needs a minimum of 2 in between the wall and the frame, and states screws are not included. Measure the pipe and the gap beside the gate first.
Flock fit
QCAA 304 Stainless Self-Locking Gate Latch, 2 Pack
QCAA 304 Stainless Self-Locking Gate Latch, 1 Pack
MLHpeak 1-3/8 in Galvanized Fork Gate Latch
Wmebee Galvanized Butterfly Gate Latch
How the examples were scored
Each example is scored on performance, build, value, safety and warranty, using only what the makers publish. No maker states a warranty term, so the warranty part of the score is zero for all four.
| Product | Keeper Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| QCAA 304 Stainless Self-Locking Gate Latch, 2 Pack | 9.6 | 29 | 21 | 21 | 4 | 0 |
| QCAA 304 Stainless Self-Locking Gate Latch, 1 Pack | 9.5 | 29 | 21 | 20 | 4 | 0 |
| MLHpeak 1-3/8 in Galvanized Fork Gate Latch | 9.5 | 28 | 20 | 20 | 4 | 0 |
| Wmebee Galvanized Butterfly Gate Latch | 9.5 | 28 | 20 | 19 | 4 | 0 |
Lower point totals read near 9.2 and the strongest near 9.8; because the conversion is proportional, rank by points equals rank by score.
Which should you choose?
Choose a stainless latch if you open a swinging coop or run gate every day and want it to lock by itself when it swings shut.
Choose a galvanized latch if you have a chain link fence gate and want a fork or butterfly latch sized to the frame.
Wash your hands after handling birds, eggs or equipment, supervise children around the flock, and check local rules on flock size and roosters before you buy. For sick birds, call a poultry veterinarian or your state extension office. See CDC backyard poultry guidance. Read our Safety Disclaimer.
FAQ for the flock
Is stainless steel better than galvanized steel for a gate latch?
Neither material wins on every gate. Stainless suits a swinging gate that needs to lock by itself, while galvanized suits a chain link gate with a named frame size. Match the latch to the gate first.
Will a galvanized gate latch rust?
The MLHpeak latch lists galvanized steel to prevent rust and corrosion, and the Wmebee latch is hot-dip galvanized with high corrosion resistance stated. Check the coating when you do the rounds.
What size gate latch fits a chain link fence?
Measure the outside diameter of the pipe first. The MLHpeak fork latch fits frames from 1-1/4 to 1-3/8 in, and the Wmebee butterfly latch fits pipe from 1-3/8 to 1-5/8 in.
Can a gate latch take a padlock?
Yes. All four latches state a padlock hole or a padlock function, so a padlock that fits adds a lock. The QCAA latches also lock automatically, so the gate stays shut without one.
Do gate latches come with screws?
It depends on the latch. The QCAA latches include mounting hardware with Philip #8 screws, and the Wmebee latch states that screws are not included.
More coop guides
- Gate Latch Types: How to Choose the Right One
- Chain Link Fence Gate Latch Types Compared
- How to Lock Chain Link Fence Gate (2026 Guide)
- Latch vs Lock for Chicken Coop: Which One Should You Buy?
- Double Door Latch Types for Coops
- How to Hang a Gate With Hinges
- Gate Hinge Types Compared
- Best Gate Latch (2026)
- Best Door Latch for Padlock (2026): 5 Picks for the Coop Door
- Padlock Types of Locks: Which Lock Suits a Coop or Gate
- Padlock Dimensions: Sizes for Coop and Gate Security
- Hasp Types for Coop Doors and Gates Compared
- How to Predator Proof a Chicken Run
- Best Predator Proof Chicken Coop: Picks With Real Hardware
See every predator protection guide and the best gate latch picks.




