Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Woods Clamp Lamp Review: Pros, Cons & Who It’s For

The Woods 0167 is a 10.5-inch brooder clamp lamp with a bulb guard, porcelain socket and a UL and cUL listing, but no warranty is stated and the listing contradicts itself on wattage.

Woods Clamp Lamp Review: Pros, Cons & Who It’s For
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Woods 0167 10.5-Inch Brooder Clamp Lamp with BulbWoods 0167 10.5-Inch Brooder Clamp Lamp with Bulb9.5/10View on Amazon
  2. 2Woods Clamp Lamp Light with Aluminum Reflector; 150W; ULWoods Clamp Lamp Light with Aluminum Reflector; 150W; ULView on Amazon
  3. 3Wooden Chick Brooder Box with Heat Lamp and ThermometerWooden Chick Brooder Box with Heat Lamp and ThermometerView on Amazon

This Woods clamp lamp review comes down to one point: the 0167 is a straightforward 10.5-inch brooder clamp lamp that takes up to a 300-watt bulb on a porcelain E26 socket, with a bulb guard, an 8-foot cord and a UL and cUL listing, but no warranty is stated and the listing itself contradicts the title on wattage and misprints the reflector size. We have not used this lamp ourselves; this review is based on the Woods listing on Amazon and the specs published there.

CoopKeeperHQ earns a commission if you buy through our links, at no added cost to you. Affiliate disclosure.

The lamp

Woods 0167 10.5-Inch Brooder Clamp Lamp with Bulb

Woods 0167 10.5-Inch Brooder Clamp Lamp with Bulb

Woods9.5/10 Keeper Score
i
The Keeper Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Woods 0167 is a 10.5-inch brooder clamp lamp with an aluminum reflector, bulb guard, porcelain E26 socket for up to 300-watt bulbs, an 8-foot cord and a UL and cUL listing, with no warranty stated.

Who it's for: keepers who need a simple, listed clamp lamp for a brooder and already have a bulb, and who value the stated safety listings on a budget fixture.

Who should skip it: anyone who wants a warranty, since the listing states none, and anyone who can use a heat plate instead, which is the safer brooding choice. The listing's wattage contradiction and the 105-inch misprint also mean you should confirm the socket maximum before buying.

We have not used this lamp; everything here comes from the Woods listing. The 0167 is the classic brooder clamp lamp: a 10.5-inch aluminum reflector, a porcelain E26 socket stated for up to 300-watt bulbs, a wire bulb guard, clamp grips plus a hook hanger, and an 8-foot SJTW cord, with a UL and cUL listing stated in the spec table.

Who should skip it: anyone who wants a warranty, since the listing states none, and anyone who can use a heat plate instead, which is the safer brooding choice. The listing's wattage contradiction and the 105-inch misprint also mean you should confirm the socket maximum before buying.

Pros

  • Porcelain E26 socket accepts up to a 300-watt bulb, stated in the bullets and the spec table, with a wire bulb guard.
  • Non-marring clamp grips and a built-in hook hanger give both clamping and hanging options for aiming the heat.
  • UL and cUL listed fixture with an 8-foot 18/2 AWG SJTW cord, a proper service cord stated right in the listing.
  • 10.5-inch adjustable aluminum reflector focuses the heat where the chicks are.

Cons

  • Manufacturer warranty description reads None., so no warranty is stated and the lamp scores zero on warranty.
  • The bullets misprint the 10.5-inch reflector as 105-inch, and the 24 x 18 x 14 in item dimensions read like the package, not the lamp.
  • A heat lamp is a well-known fire risk over dry bedding; we recommend a heat plate over a heat lamp wherever you can use one.

Other options for the coop

Woods clamp lamp review: the short verdict

A brooder clamp lamp does one job: it holds a heat bulb where chicks need it, aimed and clamped so the heat lands on the birds and not on the wall. The Woods 0167 is the classic version of that tool: an aluminum 10.5-inch adjustable reflector, a porcelain socket that takes up to a 300-watt bulb, a wire bulb guard, non-marring clamp grips and a built-in hook so you can hang it instead of clamping it.

The case for it is simple. You get a UL and cUL listed fixture with an 8-foot 18/2 AWG SJTW cord, with the wire gauge and jacket type stated in the listing, and both clamping and hanging are built in. The bulb guard keeps a chick or a stray hand from touching the hot bulb, and the porcelain socket handles the heat a plastic socket cannot.

The case against it is in the details the listing does not settle. The title says 250 W while the bullets and the spec table say up to 300 watts, and the bullets misprint the 10.5-inch reflector as “105-inch”. The manufacturer warranty description reads “None.”, so there is no stated warranty. And a heat lamp is always a fire risk in a coop, which is why our guidance leans toward heat plates instead.

Key specs

Spec Woods Clamp Lamp
Model Woods 0167 (part number 0167)
Reflector 10.5 in, adjustable, aluminum
Max bulb Up to 300 watts (title says 250 W)
Socket E26, porcelain
Guard Wire bulb guard stated
Mounting Clamp grips and built-in hook hanger
Cord 8 ft, 18/2 AWG SJTW
Listings UL, cUL
Item dimensions 24 x 18 x 14 in (reads like packaging)
Warranty None stated

These figures are the coop makers’ own ratings, read from each listing on 19 October 2026. Where the title and the bullets disagree with the spec table, the title and bullets win.

Woods Clamp Lamp

Flock size1-34-67-1213-2525+

What the Woods 0167 does well

A real porcelain socket with a bulb guard

The listing states a porcelain E26 socket that accepts up to a 300-watt bulb, plus a bulb protector cage over the reflector. Porcelain handles heat lamp temperatures without melting, and the guard keeps bedding, feathers and curious beaks away from the hot bulb. For a fixture that runs hot for weeks, that pairing matters more than the reflector finish.

Clamp and hook in one fixture

The listing describes non-marring clamp grips for grabbing a shelf or brooder edge, and a built-in hook hanger for hanging the lamp from a chain or cord. Two mounting options mean you can aim the heat where the chicks are and keep the fixture itself away from the bedding line.

UL and cUL listing stated

The spec table states “UL, cUL” under specification met, and the cord is an 8-foot 18/2 AWG SJTW, a service-type cord made for this kind of duty. A listed fixture with a proper cord is why the lamp earns safety points in our scoring, even though a heat lamp always carries a fire risk that no listing can erase.

Long, honest cord

The 8-foot SJTW cord gives you reach from the brooder to a nearby outlet, and the listing states the wire gauge and jacket type. The listed 24″L x 18″W x 14″H item dimensions are likely the packaging rather than the lamp itself, since a 10.5-inch reflector does not fill a 24-inch box.

Limitations

  • Wattage is unclear: the title says 250 W, while the bullets and the spec table say up to 300 watts. We trust the 300-watt figure from the bullets and spec table, but check the socket and guard for a stamped maximum before fitting a bulb.
  • Reflector size is misprinted: the bullets say “105-inch” while the title and included components say 10.5 inches. A 105-inch reflector would fill a wall; this is a 10.5-inch lamp and the misprint is a listing error.
  • No warranty is stated: the manufacturer warranty description reads “None.”, so the lamp scores zero on warranty and any failure is on you.
  • Heat lamps are a fire risk: a hot bulb hanging over dry bedding is a well-known coop fire risk. We recommend a flat heat plate over a heat lamp wherever you can use one; see our best brooder heat plate picks. If you do use this lamp, hang it from a chain, never from its own cord, keep it clear of bedding, and make the lamp part of every brooder check.
  • Dimensions are ambiguous: the 24″L x 18″W x 14″H figure does not match a 10.5-inch fixture, so treat it as the package size and confirm the lamp’s real footprint before planning a small brooder.

How we scored it

Product Keeper Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Woods Clamp Lamp 9.5 28 20 21 5 0

Lower point totals read near 9.2 and the strongest near 9.8; because the conversion is proportional, rank by points equals rank by score.

The Keeper Score weighs performance, build, value, safety and warranty, as explained on our how we pick page. The 0167 scores on performance for the stated 300-watt capacity and dual mounting, and on safety for the bulb guard, porcelain socket and the UL and cUL listing. The stated absence of a warranty holds it back, and nothing about a listed lamp removes the fire caution that heat lamps carry.

Who should buy the Woods 0167, and who should skip it

Buy it if

  • You need a simple clamp lamp for a brooder with a bulb you already own, up to the stated 300-watt maximum.
  • You value a stated UL and cUL listing and a proper 18/2 SJTW cord on a budget fixture.
  • You want both clamping and hanging in one lamp so you can aim the heat away from the bedding.

Skip it if

  • You can use a heat plate instead, which is the safer brooding choice; see brooder heater vs heat lamp for the comparison.
  • You want a warranty; the listing states none.
  • You need the lamp’s exact footprint in advance, since the listed dimensions do not clearly describe the fixture itself.

Before you use it

Hang or clamp the lamp so the bulb guard cannot touch bedding, and secure it with a chain or a second support so a bumped clamp cannot drop a hot bulb into straw. Keep the bulb at a height that gives the chicks a warm zone and a cool zone, and check the cord for chew marks where birds can reach it. Read alternatives to heat lamps if you want the safer route before your chicks arrive.

Chicken Coop Size Calculator

Birds, breed size, run time and climate in; coop floor, run space, roost length and nesting boxes out.

Open the calculator
Brooder and heat lamp safety

Heat lamps are a common cause of coop and barn fires. If you use one, secure it with more than the clamp (a chain or wire to a fixed point), keep it well away from bedding, walls and cardboard, and plug it into an outlet or a cord rated for the load. Radiant heat plates run cooler and remove most of that risk. Check chicks often in the first days: huddling under the heat means too cold, spreading to the edges means too warm. Read our Safety Disclaimer.

Fitting It to Your Flock

  • A 10.5-inch reflector covers a small brooder well; match the bulb wattage to chick age, with the cool end of the brooder as their escape from the heat.
  • Hang the lamp from a chain in a brooder rather than clamping it to a wooden edge, where a knocked clamp can land a hot bulb in the bedding.
  • Size the brooder so chicks can move fully out of the heat circle; a lamp aimed at a small box gives them nowhere to go.
  • Check the cord routing daily where chicks run: the 8-foot cord is long enough to reach the outlet but also long enough to drape into the litter.

FAQ for the flock

What wattage bulb does the Woods 0167 take?

The listing is inconsistent: the title says 250 W while the bullets and spec table say up to 300 watts on the porcelain E26 socket. We trust the 300-watt figure, but check the socket’s stamped maximum before fitting a bulb.

Is the Woods 0167 safe for chicks?

The lamp itself is UL and cUL listed with a bulb guard and porcelain socket, but a heat lamp is always a fire risk around dry bedding and young birds. Hang it from a chain, keep it clear of the litter, and consider a heat plate, which is the safer brooding option.

Can I hang the Woods 0167 instead of clamping it?

Yes. The listing describes both non-marring clamp grips and a built-in hook hanger, so you can clamp it to a brooder edge or hang it from a chain above the chicks.

Does the Woods 0167 come with a bulb?

The listing names the fixture as the included component and states the socket accepts up to a 300-watt bulb; no specific bulb is named as included, so plan to supply your own.

Is there a warranty on the Woods 0167?

The manufacturer warranty description in the listing reads “None.”, so there is no stated warranty. That is why the lamp scores zero on warranty in our scoring.

More coop guides

Explore our complete brooders section, or read our brooder box picks for the housing that goes under the heat.

More buying guides

Brooders ·

How Long Do Chicks Need a Heat Plate

Chicks need a heat plate until they are fully feathered and stop seeking its warmth, and the signs in the brooder tell you when…